Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹55.8 L
EMD Value
₹1.1 L
Closing Date
26 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Avionics Division, Hyderabad
Avionics Division, Hyderabad
Civil works for CRI quarters in HAL township
9606
HAL/HD/CE/T/24-25/19
Works
Accessories Complex- Avionics Divn-Hyderabad-Plant Maintenance
₹0
₹1.1 L
26 Sept 2024
5 Sept 2024
5 Sept 2024
26 Sept 2024
Removing old damaged asbestos cement corrugated sheets of any size fixed with J-bolts / screws at all heights and handing over the useful materials to stores with rate including hire charges for labour,tools,etc all as specified and directed by EIC.
Demolishing the existing cement plastered brick masonry made in Cement mortar of any thickness including stacking serviceable materials and disposable of unserviceable materials within 50 metres lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.
Dismantling existing R.C.C/ PCC work of any thickness and description including stacking of steel bars and disposable of unserviceable materials within 50 metres lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. as specified and as directed by EIC
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone ggregate 20 mm nominal size derived from natural sources) all as specified and directed by EIC.
Providing and constructing brick work with best locally available flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in CM 1:6 for walls for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, including cost of all materials,labour,taxes, curing etc., complete as specified and directed by EIC.
Plastering internal / external brickwalls / concrete surfaces with C.M 1:6, 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding,etc. at heights with rate including cost of all materials,labour,curing,transportation,other incidental charges,etc all as specified and directed by EIC.
Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by EIC)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 Mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by EIC. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required.
Dismantling the existing Ceramic floor/wall/dado tiles of any thickness carefully including removal of cement mortar bedding as directed and sorting / stacking the useful materials complete with rates including cost of tools, hire charges for labour, taxes,etc., all as specified and directed by EIC.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size (preferably 0.3m x 0.45m) as approved by EIC, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.
Providing & fixing on wall face at all heights, Single socketed unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion with rate including cost of all materials,labour,transportation,safety equipments, other incidental charges,etc all as specified and directed by EIC.
Removing old paint from walls / ceilings, beams, columns, parapet walls, etc., including cornices, pilasters by sand papering, dustsing, brooming, scrapping, wahsing, rubbing down wherever required and applying Two coats of ACE exterior emulsion paint / Acrylic Smooth exterior paint of Asian paints or equivalent make of approved shade over a coat of water thinnable cement primer on wall surface having VOC content less than 50 grams/litre of Asian paints with rate including cost of all materials, tools,labour ,scaffolding,wastage, etc., complete at all as approved, specified and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.(Co-efficient / multiplication factor shall be applied as per DSR 2023)
Removing old distemper paint from walls/ceilings, beams, columns etc. including cornices, pilasters by sand papering, dusting, brooming, scrapping, washing, rubbing down wherever necessary and Supplying & applying Two coats of Acryllic Emulsion paint of interior grade (ready mixed) having VOC content less than 50 gms/litre and also supplying over a coat of whte cement based putty of average thickness 1mm and applying one coat of water thinnable cement primer on having VOC content less than 50 grams/litre of Asian Paints or equivalent product in Berger make of approved shade with rate including cost of all materials, labour,tools, scaffolding, wastage, etc complete all as approved, specified and directed by EIC.Contractor should ensure all safety measures if work is carried out at heights at his own cost.(Co-efficient / multiplication factor shall be applied as per DSR 2023)
Preparatory work on old painted wooden/steel/wall/surfaces by sand papering, dusting, stopping, scrapping where ever necessary and applying TWO coats of Utsav quality Synthetic Enamel paint of Asian Paints make or equivalent product in Berger make of approved shade with rate including cost of all materials, labour,tools, scaffolding, wastage, etc complete all as approved, specified and directed by EIC. Contractor should ensure all safety measures at his own cost if work is carried out at heights. (Co-efficient / multiplication factor shall be applied as per DSR 2023)
Supplying and fixing Vitrified tiles for flooring / skirting ( HD Polished Digital type) of (KAJARIA / NITCO / JOHNSON / SOMANY) make of size 600 X 600 mm, 10mm thick and 3mm wide spacer joints for floors of approved design and pattern fixed over CM 1:6, 20 mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 kg/sq.m or using tile adhesive of 5mm average thickness of VX1 KAJARIA or MYK LATECRETE make and jointed with approved joint filler of matching colour / shade etc. complete, with rates including hacking the mosaic / Concrete floor surface, cost of all materials, labour charges, tools, lifts, leads, transportation,etc., all as approved, specified and directed by EIC.
Providing and fixing 18 mm thick Granite stone of colour black / cherry red/ Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels all as specified and directed by EIC.
Supplying, fabricating by welding and erecting M.S rolled structural members like I-Beams,channels , angles M.S pipes, MS square pipes, chequered plate,square rods,etc of TATA, SAIL, RINL make conforming to IS specification including lifting,hoisting,fixing in position by welding at site,bolting and over a coat of Zinc Chromate primer of ASIAN paints, ICI, BERGER or equivalent make all as specified and directed by EIC.The relevant code of procedure for rolled steel section dimensions, welding ,erection and hoisting and tolerances allowed shall be complied.
Providing and fixing ISI marked 30mm thick flush door shutter (Greenply / Kitply / Centuryply make) single or double leaf, solid core (with block board) confirming to IS 2202 (Part 1) etc with rate including wastage,cost of all materials, labour charges for fixing, hire charges for tools,consumables like screws, transportation,etc all as specified and directed by EIC.
Supply and fixing 18.00 mm thick BWP grade plywood sheets of GREEPLY / CENTURYPLY / KITPLY make confirming to IS 710 for making cup boards shutters / shelves of approved design with rate including wastage,cost of all materials,labour,taxes,wastage,etc. complete as directed by EIC.
Supply and fixing 12.00 mm thick BWP grade plywood sheets of GREEPLY / CENTURYPLY / KITPLY make confirming to IS 710 for for frame work for cup boards with rate including wastage,cost of all materials,labour,taxes,wastage,etc. complete as directed by EIC.
Providing & fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S of GREEN LAM / DECOLITE / ROYALE' TOUCHE' make including cost of adhesive of approved quality with rate including cost of all materials,, head less nails, Abro masking tape,wastage,labour,transportation,etc all as specified and directed by EIC.
Providing & fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard shutters including necessary synthetic resin hot pressed to edges on binding machine,etc complete all as specified and directed by EIC.
Supplying & fixing 150mm long brass handles with polished bright of approved quality and make for door shutters as directed, using necessary screws etc., complete with rate including cost of all materials, tools, labour, etc., all as specified and directed by EIC.
Supplying & fixing 250 x 10mm bright finished brass tower bolts of barrel type of approved make and quality for door shutters using necessary screws with rate including cost of all material, tools, labour,etc., specified and directed by EIC.
Supplying & fixing 125 x 85x 5.5mm (Heavy type) bright finished brass butt hinges of approved quality and make for door shutters using necessary screws etc., with rate including cost of all material, tools, labour, wastages,etc., specified and directed by EIC.
Supplying & fixing 300 x 16 x 5mm bright finished brass door latch / aldrop of approved quality and make for door shutters using necessary screws etc., with rate including cost of all material, tools, labour, wastages,etc., all as directed and approved by EIC.
Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer,plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-incharge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc.complete all specified and directed by EIC.
Supplying & fixing 75mm long bright finished brass handles of HETTICH / HAFELE make for cupboard shutters using necessary screws etc., with rate including cost of all material, tools, labour, wastages,etc., all as directed and approved by EIC.
Supplying & fixing Aluminium G-profile handles of approved quality and make for cupboard drawers using necessary screws etc., with rate including cost of all material, tools, labour, wastages,etc., all as directed and approved by EIC.
Providing and fixing stainless steel soft closing spring hinges at 0 / 8 degree cranked hinges (hydraulic type) of HETTICH / HAFELE to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete all as specified and directed by EIC.
Providing and fixing double strip (horizontal type )magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete all as specified and directed by EIC.
Disposal of building rubbish / malba / similar unserviceable, dismantled material like structural steel or waste materials by mechanical means, including loading,transporting, unloading to specified location,beyond 50 m initial lead, for all leads (within HAL premises) including lifts involved,vehicle,labour,fuel charges,driver etc complete all as specified and as directed by EIC.
HAL/HD/CE/T/24-25/19
HAL/HD/CE/T/24-25/19
Civil works for CRI Quarters in HAL Township
Description
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
GST NO.:
PAN No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.
TURN OVER IN Rupees
Pls Enter Turn over in Rs. for all the 3 years
ESI & PF Nos with proof (If any)
Related Document to be Uploaded to e-Procurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
80% (One Work)
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
Pls Accept The Delarication
DECLARATION II
Pls Accept the Delaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
ChecklistofDocuments.pdf
TENDER_DOCUMENT • 0.02 MB
SCOPECE19.pdf
TENDER_DOCUMENT • 0.01 MB
NITCE19.pdf
TENDER_DOCUMENT • 0.30 MB
TBCE19.pdf
TENDER_DOCUMENT • 1.92 MB
ProformaB.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureL.pdf
TENDER_DOCUMENT • 0.01 MB
ProformaA.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureI.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureIIB.pdf
TENDER_DOCUMENT • 0.01 MB
PROCESSDOCUMENTFORSBICOLLECT.pdf
TENDER_DOCUMENT • 1.18 MB
EFTmandateform.pdf
TENDER_DOCUMENT • 0.01 MB
coveringletterEMD.pdf
TENDER_DOCUMENT • 0.01 MB
pricebidCE19.xlsm
TENDER_DOCUMENT • 0.05 MB
PQCE19.xlsm
TENDER_DOCUMENT • 0.03 MB
AnnexureIIC.pdf
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .