Annual Maintenance Contract of Street Light and Triangular Sign Board for 03 years at Saraswati Hi Tech City Naini Prayagraj

S/F of 6 Amp.To 32 Amp. SP MCB (10KA) C curve Cat-B as per UPPWD Sch. No.1002

S/F of heavy duty cadmium plated copper connector with end plate complete in all respects (c) four way connector HKM 100 as per UPPWD Sch. No.1128 (c)

S/F of ML-4 contactor MDS/L&T make complete including all T&P man and material required for proper completion of work

S/F of mounting time switch (timer clock) L&T/MDS make complete including all T&P men and material required for proper completion of work

Supply and wiring of sub main with 02 nos.of 2.5 sq. mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of work as directed E/I as per PWD Sch. No. 289

Supply & fixing of driver suitable for 70 to 110 watt LED street light fittings as per make installed at Site complete in all respect (Philips, Crompton, Bajaj, Wipro make)

Supply & fixing of MCPCB with LED & Lance ( 70 to 110 watt) for suitable installed LED street light fittings complete in all respect.

Supply & Fixing of Glass suitable for installed LED street light fittings complete with rubber gasket etc. complete in all respect.

Supply & fixing of LDR suitable for installed LED street light fittings complete in all respect.

Supply & fixing of special protection device (SPD) suitable for 70 to 110 watt LED street light fittings as per make installed at Site complete in all respect

Dismantaling & Re- Fixing of LED Street Light / Flood Light For Repairing

Repair of 63/100 KVA Transformer including changing of HV & LV Coil ,Bushing ,Gasket & Fresh Transformer oil without returning of old oil & unservicable material complete in all respects

Hiring Charges of 80-100 Feet expandable street light repairing hydraulic lift capacity 300 Kg. including cost of operator ,mounting vehicle and fuel etc. for 4 days in a month on hourly basis or as per actual requirement for street light poles complete in all respects as per direction of E/I

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 16 sq.mm 4 core cable of 1100 v grade complete rates.

Painting of ST/octogonal pole/High mast foundation excavation below up to ground level surface finishing and white cement and dark yellow colour paint with double coat including cost of materials Men & T&P complete in all respect.

Painting letters (pole No) 2.5 cm up to 8 cm size complete on street light pole /panels /other electrical properties under UPSIDA including cost of materials Men & T&P complete in all respect.

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 25 sq.mm 3.5 core cable of 1100 v grade complete

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 35 sq.mm 3.5 core cable of 1100 v grade complete rates

Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 25 sq.mm 3.5 core cable of 1100 v grade complete rates

Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 35 sq.mm 3.5 core cable of 1100 v grade complete rates

Supply and laying of 35 sqmm. 3.5 core, aluminium conductor PVC insulated, armoured served, sheathed cable 110 volt garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per UPPWD Sch No. 501(k) (Polycab, Havells, Grandlay, Gloster, KEI make)

Supply and laying of 25 sqmm. 3.5 core, aluminium conductor PVC insulated, armoured served, sheathed cable 110 volt garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per UPPWD Sch No. 501(i)&507(Polycab, Havells, Grandlay, Gloster, KEI make)

Supply and laying of 16 sqmm. 4 core, aluminium conductor PVC insulated, armoured served, sheathed cable 110 volt garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per UPPWD Sch No. 501(i)&507 (Polycab, Havells, Grandlay, Gloster, KEI make)

Supply & laying of 90 mm dia I/D HDPE DWC pipe ISI marked along with all accessories like socket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm delow ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc.

Supply, laying and fixing 50 dia GI pipe Trench Less Through manual Boggi including trenching 90 C.M. deep and refilling etc. as per Job no. ED-1(235) Dated 04.02.2025

Charges for maintenance ,proper watch and ward of entire electrical system of Street Light and High Mast Tower, cables, conductors, poles, panels etc and all other available material as per direction of engineer in charge for road lightng in sector 2,3,4,6,7,8,9,12,12A,14 etc to cover the general supervision for execution of work including dismantling and re fixing of all street light of UPSIDA during the period of AMC for 36 months (with manpower 05 Electrican and 05 Helper) capable for working on 11 KV LT/HT System .

Strengthing of foundation of ST/Octagonal pole /Panel's foundation by providing new concreting including broken of weak foundation excavation below upto ground level surface finishinfg and painting with white cement and dark yelloe colour cost of all material men and tnp complete in all respect .

Supplying and fixing of factory wired integral LED Flood Light luminares with die cast aluminium housing built with driver set suitable for 140-150 watt confirming to IP 66 protection complete in all respect CAT AA as per PWD schedule no 1454 (Philips, Bajaj, Crompton, Wipro make)

S/F of brass nickle plated compression gland for PVC insulated and armoured served sheated underground cable including rubber ring etc.complete in all respect.as per direction of engineer incharge as per UPPWD sch no 503(k) 25 sq mm 3.5 core

S/F of brass nickle plated compression gland for PVC insulated and armoured served sheated underground cable including rubber ring etc.complete in all respect.as per direction of engineer incharge as per UPPWD sch no 503(k) 35 sq mm 3.5 core

S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the engineer incharge as per UPPWD sch no 504 (d) 16 sqmm

S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the engineer incharge as per UPPWD sch no 504 (d) 25 sqmm

S/F of following capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(f) (40 Amp. TPN)

Surface mounted outdoor rated luminaire with multi dimensional beam made of pressure die cast and in anthracite finish.12 W integrated LED Luminaire with min lumen output of 940 lumen in 3000K.Equivalent makes:Philips/Iguzzini/Ligman(warranty 3 years through contractor)with M.S. cage for LED

S/B of 40 mm dia x 4.5 mtr. Long GI pipe vertical for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe upto appron upto switch board 30 CM square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701

Supply and laying of 25 mm x 3mm G.I. strip from earth electrode directly in the ground as required respects as per UPPWD Sch. No. 716

Supply & Fixing of LED light strip with RGB colour light complete with driver etc.complete in all respect . (LED Strip light 03 Colour total length 18 mtr , LED Strip Driver 03 No. for each colour )

Supply and laying & concealing of 25mm dia ,2mm thick PVC conduit pipe with ISI marked embossed and with PVC acessories confirming to IS No. 3419 like bends,couplers,staples and other acessories for drawing wires duly sealed at joints,plastering with cement sand mortar finished to level with mathing colour wash including cost of all material labour and T&P. UPPWD Sch item No. 149(A)

Supply and laying of PVC corrugated conduits of 25 mm outer dia on surface with required fixing acessories including cost of all material labour and T&P. UPPWD Sch item No. 185(III)

Cost of all materials ,spares,wire,fuses,small accessories required for general maintinance,cleaning,oiling/greasing etc. to keep the entire installation of street lighting and high mast towers in perfect working conditions during annual maintinance contract period for 36 Months (LS Basis) as per direction of engineer in charge.

Supply installation testing and commissioning of factory wired integral LED Coloured (Red/Green/Blue/Yellow) light luminaries 100 W with die cast alluminium housing built with driver set suitable for 100 W confirming to IP65 Protection and with theft protection cage,complete in all respect as per direction E/I.

Dismantaling & re-grouting of street light 12 tilt/sick bend/STP pole in 1:3:6 ratio cement concrete with stone pad including strenghting of pole by providing additional 04 nos supports of 65x65x6 mm or higher size MS angle in suitable length with the help of wedding/cutting as per technical specification.