RENOVATION OF EARSTWHILE OFFICE OF TD AV AND WS IN APJ ABDUL KALAM BLOCK FOR TD GS

Civil Works: Providing, fabricating & installation of wall mounted wooden storage units of depth 450 mm, made out of 18mm thick ply wood, external surface finish with 01mm thick laminate and all exposed side finish with teakwood beading, internal surface finished with 0.80 mm laminate, with standard hardware’s such as lock, C type PC handles, piano hinges, skirting, locking arrangement, etc. complete neat and attractive finish, including transportation, shifting, labor etc,. as per sample available at ADA. Make : Archid Ply / Kit Ply / Anchor Board. Make : Decolite / Decolam / Archid lam / Green lam / Veerlam.

Supplying & installation of wall mounted wooden storage units of size: 2100 mm(W) x 2500 mm(H) x 450 mm(D), made out of 18 mm thick ply wood, with shutters of both 08 mm thick clear glass & 18mm thick plywood, External surface finish with 01mm thick laminate and all exposed sides finish with 2mm edge beading, internal surface finished with 0.80 mm laminate of approved shades respectively with standard hardware such as lock, suitable PC handles, sliding doors with channels for smooth movement, 08 mm glass & 18 mm ply as sliding shutters, skirting, locking arrangement such as magnetic holders and tower bolts for wooden doors and suitable locking system for glass doors etc. complete neat and attractive finish. Stability of the structure individually and totally will be the responsibility of the vendor. All as per OEMs specification and sample available at ADA. Make : Archid Ply / Kit Ply / Anchor Board. Make : Decolite / Decolam / Archid lam / Green lam / Veerlam.

Electrical Works: Supply & drawing of Sub-Circuit 2 runs of 2.5 sqmm +1 run of 1.5 sqmm FRLS PVC insulated copper conductor, single core cable in the surface/recessed steel/PVC conduit as required. (For UPS Power Circuit)

Supply & drawing of Sub – Circuit 2 runs of 2.5 Sq.mm + 1 run of 1.5 Sq.mm FRLS PVC insulated copper conductor, single core cable in the surface/recessed steel/PVC conduit as required. (For RAW Power Circuit)

Supply & installation of 1 no. of 5/15A Power socket outlet controlled by 20A single pole switch with indicator housed in PVC boxes, Fitted at sitting desk as required by client (3 modular box brown color for RAW Power Points)

Supply & installation of 3 no’s of 5/15A Power socket outlet controlled by 20A single pole switch with indicator housed in PVC boxes, Fitted at sitting desk as required by client (8 modular box white color for UPS Power Points)

Supply and fixing of Legrand 15 Amps Switch in the existing switch box

Supply and fixing of 9*9-inch square type exhaust fan

AIR CONDITIONING WORKS Supply, Installation, Commissioning and Testing of 3 Star Rated, 6 in 1 convertible dual inverter 2 TR Capacity Split type Air Conditioning System complete with accessories like indoor unit, outdoor unit, cordless remote control and Vidoflex insulation foam etc. including pressure testing, topping up of R32 gas, providing MS angle frame for mounting outdoor units (outdoor unit stand), Installation of Ac by inter connecting the suction & discharge pipe, laying the drainage pipe fixing the indoor unit & fixing the outdoor unit on the frame with necessary support & clamp, testing and commissioning units.

Supply and laying of 2.5 Sq mm 4 Core PVC Flexible copper cables through PVC pipe to individual A/c indoor unit to outdoor unit including necessary fixing accessories.

Supply installation and commissioning Copper Suction Pipe (1/2 inch) &Copper Discharge pipe Size (1/4 inch) with standard thickness for 1.5 TR ACs including Video flex insulation

Supply installation and commissioning of 1” dia PVC/Flexible Drain pipe line pipe including necessary fixing accessories.

Supply and fixing of 3” PVC (Box Type) casing & capping for routing copper piping and drain piping. (Wherever required)

Furniture Works: 6-seater rectangular meeting table with table top of 3 layer prelaminated particle board of grade2, type 2 of IS 128:123 (210 x 115 x 74) in cm • Work top--Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing dual access flap provided for access to power supply and data cables. • Under structure-The Under-structure consists of mixture of 25mm and 18mm pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodized aluminum alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management - A wire raiser made of 0.8mm CRCA MS IS: 513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either side for standard 8 modules Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg. HDMI, VGA-A,etc).

Supply and installation of MID BACK CHAIR of following specification • SEAT/BACK ASSEMBLY: The seat is made up of 1.2 +0 1cm thick hot-pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam The back is made up 1.2 TO 1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam The back ply and foam is designed with contoured lumber support for comfortable seating posture * MID BACK SIZE 48.5 cm (W) X 64.5 cm (H) * SEAT SIZE 51.0 cm (W) X 48.0 cm (D) • HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m* and Hardness load 16 2 kgf as per IS 7888 for 25% compression • ARMRESTS (ADJUSTABLE):The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of B3 81z0 03 cm x 0 2-LO 01 cm thk M S E R W tube having chrome plated finish The armrest height adjustable up to 6 5z0 Scm in 5 steps • KNEE TILT SYNCHRO MECHANISM WITH SEAT DEPTH ADJUSTMENT * 360° revolving type Single point control * Single point control * Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment * 4-position locking with anti-shock feature Seat back tilting ratio of 1.2 * Seat depth adjustment of 6.0 +0 Scm can be locked in 6 positions • FRONT PIVOT SYNCHRO MECHANISM: The mechanism is designed with the following features * 360° revolving type Single point control * Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment * 4-position locking with anti-shock feature * knockdown condition vacations within +1 0 cm • ADJUSTABLE BACKREST: The back rest is connected to the mechanism with a drop-iift mechanism which can be adjusted in the range of 7.0 IO.5cm. And locked in 5 positions for the better lumbar support. • FIXED SPINE (CONFERENCE/ VISITOR): The seat and back are arrested together with fixed type spine i.e no back up/down adjustment; made of 0.8 TO.05 cm thk HR Steel and is black powder-coated ( DFT 40-60 microns ) • HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.010.3 cm. • PEDESTAL ASSEMBLY: The pedestal is fabricated from 0.2 0.02 cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.010.Scm. Pitch-centre dia. (76.011.0 cm with castors). • TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon.

3 SEATER SOFA • SEAT FOAM: The seat is made up of PU foam in Density 28 ±2 kg/cum with an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. • BACK FOAM: The back is made up of PU foam in Density 28 ± 2 kg/cum with two additional top layer of super soft foam of density 32±2 kg/cum, upholstered with fabric or leatherette. • UNDER STRUCTURE: Under structure is made up of 1.2±0.1 cm. thick hot-pressed plywood [moisture resistance & termite proof as per IS: 303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose. LEG ASSEMBLY: It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic end cap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45CM.

Supply and installation of Centre table of following specification • Overall Size : Width : 100cm Depth : 65cm Height : 45cm TABLE LEGS MATERIALS: Color :cherry TABLE TOP MATERIALS & SIZE: (tempered Glass/ 10mm), L X W X T: 1000x650x10mm Color: clear.

PNR INTERIOR SOLUTIONS PVT LTD (BID ID -3283798)

MBTECH (BID ID -3283942)