Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹26.6 L+₹10,764 (0.41%)Rejected-Finance | L2 | Rejected-Finance Not become lowest bidder | |
| 3 | L3₹27.0 L+₹45,627.50 (1.72%)Rejected-Finance | L3 | Rejected-Finance Not become lowest bidder | |
| 4 | L4₹27.6 L+₹1.1 L (4.18%)Rejected-Finance C 204 NANGLI EXTN NEW DELHI | WEST | DELHI | 110043 | L4 | Rejected-Finance Not become lowest bidder | |
| 5 | L5₹27.6 L+₹1.1 L (4.27%)Rejected-Finance VIJAY NAGAR KUMHARTOLI HANSARI INFRONT OF JIGYASA INTER COLLEGE JHANSI | JHANSI | UTTAR PRADESH | 284001 | L5 | Rejected-Finance Not become lowest bidder |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
27 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Jhansi
Garrison Engineer Jhansi
COMPREHENSIVE REPAIR TO CERTAIN MD ACCN UNDER AGE B/R I AT GE JHANSI
2022_MES_565875_1
GE/JHA/TOK/67 OF 2022-2023
Open Tender
Civil Works
Item Rate
180 days
GE Jhansi
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
Yes
GE Jhansi
₹70,000
Yes
6 Feb 2023
29 Nov 2022
29 Dec 2022
29 Nov 2022
27 Dec 2022
13 Dec 2022
29 Nov 2022 - 6 Dec 2022
Amount
M&L for preparation of existing surface by brush , sand paper, surface repair if required etc on any type of wall surface and applying one coat of oil bound distemper white or tinted complete all as specified and directed.
All as specified in item No 01 above but applying two coat of oil bound distemper of white or tinted on walls.
All as specified in item No 01 above but applying one coat of distemper oil bound white or any tint on ceiling complete all as specified and directed.
M&L for preparation of existing surface and applying a layer of wall care putty on wall and applying two coat of Oil bound distemper over it for complete smooth finish of surfaces complete all as specified and directed. .
M&L for preparing old or previously untreated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed.
M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old surface and applying one coat of white wash (lime) on walls inlcuding cornices plastered or un-plastered surfaces complete all as specified and directed .
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. and rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces in two layers, finished even and smooth without using extra cement complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. and M&L for rendering 15mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.
Preparing newly plastered surfaces of wall and applying two coats of oil bound distember over a coat of putty and a coat of cement based primer to make the surface to be plain and smooth complete all as sppecified and directed.
M&L for preparation of newly plaster surface of wall and applying two coat of weather proof exterior grade emulsion paint over and including a coat of cement based primer, complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand preparing / rubbing and finally washing with watering and applying a coats of exterior emulsion acyrlic weather proof antifungal paint over a coat of exterior grade primer complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B0 using 20 mm graded stone aggregate as in sub base etc, complete all as specified and directed.
M&L for Non skid ceramic color tiles of size 300x300mm, 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.
M & L for Non- skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.
M&L for Non skid ceramic color tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm (square / rectangular) as in flooring etc. set and jointed in neat cement slurry including spacer and filling material coloured to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.
M&L for ceramic coloured glazes tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed.
M & L for machine cut granite (of any type) slab/ tiles 20mm thick, bedded and jointed in counter with gray cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding, polishing and making hole in platform for gas pipe over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.
Demolition of cement concrete of any description and in any position of WC’s/Bathroom etc in sunken portion area above ground floor, removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed.
M&L for application/forming of water proofing liquid membrane moistening the prepared surface for proper dispersion and penetration and applying two component cementitious elastomeric water proofing coating damp block 2k as per manufacturers specifications. The treatment shall be carried out to the entire bottom surface and vertical surface upto the bottom height of wall tiles. Adequate curing to be done on vertical surfaces and ponding test for 48 hours on the bottom surface to be carried out complete all as specified and directed. NOTE : (a) Treatment shall be done through authorised applicator/representative of the manufacturer only and an undertaking shall be obtained from manufaturer by the contractor and submitted to Eng-in-Charge. (b) Warranty for 7 years for effectiveness of water proofing treatment to be submitted by the contractor as per manufacturer norms.
M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding levelling etc and roof kerbs with liquid water proofing solution finished even and fair with proper slope as prepatory works to water proofing treatment complete all as specified and directed. Note:-liquid water proofing solution shall be provided in 150ml in 50 Kg of Cement by weight and cost of liquid water proofing solution measured and paid seperately complete all as directed.
M&L PCC 1:5:10 Type E2 using 40mm graded stone aggregate as in mass filling in two layer in sunken portion complete all as specified and directed
M&L 50mm dia medium grade G.I pipe as in spout to drain out if any leakage occures in the sunken portion complete all as specified and directed
Supply only liquid water proofing compound complete all as specified and directed
Taking down eaves gutter and rain water pipes including all fittings any size and pattern and S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench complete all as specified and directed
Taking down eaves gutter and rain water pipes including all fittings any size and pattern and S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench complete all as specified and directed
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.
S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.
S & F PVC Floor trap of 75 mm outlet with grating including jointing to waste pipe in run lead complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections including fittings and S & F 15 mm bore Galvanized Steel tubes, medium grade including necessary fittings etc fixed to walls and ceilings or laid in floors complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections including fittings and S & F 20 mm bore Galvanized Steel tubes, medium grade including necessary fittings etc fixed to walls and ceilings or laid in floors complete all as specified and directed.
Dismantling water tanks RCC/ PVC any description and S&F 500 litres capacity Rotational moulded polyethylene water storage tanks TRIPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I
Dismantling water tanks RCC/ PVC any description and S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks TRIPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of exc. 250 litres & not exc. 500 litres capacity of tanks,Date of cleaning of tank will be marked on the tank by stencil with synthetic enamel paint in uniform size, Size of letters & numbers should not exc 30mm. complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of 1000 litres capacity of tanks, Date of cleaning of tank will be marked on the tank by stencil with synthetic enamel paint in uniform size, Size of letters & numbers should not exc 30mm. complete all as specified and directed.
Demolition of cement concrete in ground floor including terrazo flooring and paving n exc 15cm thickness (below or above the ground level) built in cement mortar complete all as specified and directed.
Demolition of RCC not exc 15cm thickness as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab and similar suspended work
Dismantling for Stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry and pointed in any mortar, complete all as specified and directed.
M&L for RCC M-25 (Nominal Mix) (using 20 mm graded stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M & L for Cutting/ Griding/ polishing on existing terrazzo / kota stone flooring as per local trade practice, complete all as specified and directed.
M & L for Cutting/ Griding/ polishing on existing terrazzo / kota stone on vertical surface as per local trade practice, complete all as specified and directed.
S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP waste copling,including PTMT PVC connection 600mm long complete all as specified and directed .
Supply and Fix 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, low level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long, flush pipe 32mm dia PVC complete all as specified and directed.
S&F in replacement of 1st quality vitreous china squatting pan (IWC) Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as specified and directed.
Supply & Fix in repairs Vitreous China wash down water closet pan (pedestal pattern), EWC, coloured including jet system & matching coloured seat cover fixed complete all as specified and directed.
S&F PTMT grating of square/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as specified and directed.
S & F in repairs 15 mm bore Bib taps, cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15 mm bore concealed type stop cock fancy type,chromium plated with long sank crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F 15 mm bore Brass CP swan neck kitchen sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
S&F 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
S&F in repair of overhead shower of dia 125 mm round shape/square single flow, ABS body chrome plated fancy type, with and incl swivel type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.
S&F in replacement of Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as specified and directed.
S&F in repair of PVC waste pipe 32 mm dia 750 mm long for wash hand basin or for kitchen sink, complete all as specified and directed.
S&F in repair of waste coupling, chromium plated (half or full threaded), 32 mm dia size, complete all as specified and directed.
S&F in replair of sink coupling, chromium plated (half or full threaded), 40 mm dia size, complete all as specified and directed.
S&F in repair of PVC connection 450 x 15mm dia PTMT (PVC), complete all as specified and directed.
S&F in repair of towel rail 20mm dia 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as specified and directed.
S&F in repair Toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed.
All as per item No 67 here-in-above but not exc 1.5 sqm each
Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed.
Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed.
S&F 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup board shelves/shutter or similar work inclding dismantling of old board in any position, complete all as specified and directed.
S & F Solid PVC Wall Lining consisting of 5mm thickwood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
S&F in repairs Block boards 18/19mm thick, grade 2 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete as per the specifications and as directed by the Engineer - in -charge.
S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed
S&F magnetic catcher for fixing in cupboard, to hold the shutter in closed position, complete all as specified and directed
S&F of 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, fancy type bright finished, complete all as specified and directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strips of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/or sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2020 (Section 8, on Page no - 180), complete all as specified and directed.
M&L Framed work (Fe 410W, Gde 250) quality'A' as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc including hinges weld etc complete all as specified and directed .
M&L for second class hard wood. Plain, solid, straight chowkhats and frame, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixing, complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) for bed block for fixing of chowkhats, cills ,pre-cast lintel n.exc 1.5mtr,coping,benching etc complete all as specified and directed.
S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. sizes of members as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and directed.
S&F 30 mm Factory Made Solid Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note :- (a) The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x25mm and 3.0mm thick.
M&L for box type steel window with 80 x 40 x1.25 mm MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and including , grill using 12 mm square bar @ 10 cm C/C including , box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x25mm and 3.0mm thick.
S&F powder coated aluminium slinding window with three track outer frame suitable for sliding aluminium shutters, weight of aluminium setion not less than 0.55Kg/M of three track frame, including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire mesh including necessary locking arrangement , handle, aluminium grill of aperature size 50mm and 4mm dia etc complete all as specified.
M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed.
M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws etc, complete all as specified and directed.
M&L for powder coated aluminium wall partition, window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc, complete all as directed.
M&L for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed.
S&F of 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.
S&F of 75mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.
S&F of 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws, complete all as specified and directed.
S&F of 150mm long mild steel pressed handles, oval type, stove enamelled black and fixed with screws, complete all as specified and directed.
S&F of 300mm long mild steel, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed.
S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.
S&F of 100mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.
S&F of 150mm aluminum handle cast type anodized complete all specified and directed.
S&F of 100mm aluminum handle cast type anodized complete all specified and directed.
S&F in repair of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed
S&F for Door stopper 140 mm of aluminium alloy body anodised with tongue of rubber bush at one end fixed to door complete all as spd and directed by Engr in charge
S&F Rubber bush of 25mm long fixed to door complete all as spd and directed by Engr in charge
S&F 125 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.
S&F 3mm thick sheet glass frosted/figured and pin headed glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed
S&F 15 mm bore Brass CP Splash Health Faucet with 1 mtr SS tube & hook screwed down for iron pipe and fixed, complete all as specified and directed.
M&L in repair for stainless steel curtain rod 25mm dia with caps/lobs and wall mounting bracket cutting in to length required at site complete all as specified and directed by Eng-In-Charge
S&F 15 mm bore Brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as directed. (Make: Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality) ).
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45/60cm long all as approved complete all as specified and directed..
S&F in repair Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing. all as approved complete all as specified and directed.
S&F in repair Vitreous China urinals, half stall type, all as per Hindware cat part no 60022/60023 or equivalent complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (inclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.
S&F in replacement of two way angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all as specified and directed.
S&F in replacement ceramic One Piece Water Closet including slow falling seat cover and all necessary fittings of suitable size all as per Hindware cat part No 20107 (P-18/S-22) or equivalent as approved complete all as directed.
S&F in repair Vitreous China Table top wash hand basin of suitable size incl complete necessory fittings excluding taps all as per Hindware cat part no 91088 model PEARL of Italian collection. or equivalent as approved excluding taps complete all as specified and directed.,
S&F 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.,
M/sDaljeet singh keer
Shree Jee Associates
S GOURAV PRAKASH ENTERPRISES
ARTISTIC BUILD CO
A K ENTERPRISES
M/s JS Constructions
FTH Traders
V K Engineers and Associates
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .