PROVN OF STREET / FENCE / BUILDING SECURITY, GATE LIGHTING, PROVN OF FRESH WATER DISTRIBUTION ARRANGEMENT AT ICG ACCN NEAR JETTY AT KAMORTA UNDER GE(I) CAMPBELL BAY

Amount

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc., n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in excavated soil all as specified and as directed.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and as directed.

Supply and laying XLPE, insulated, armoured, heavy duty, electric cable with stranded aluminium conductors, 1100 volts grade with cross sectional area of 3.5 Core x 35 Sqmm, laid in trenches/ fixing on wall /poles or passing through pipe, including connecting up with suitable glands, lugs, nuts and bolts wherever required and testing on completion, with GI protection pipes, complete all as specified and as directed.

Description all as per Item No 4 above but with cross sectional area of 2 Core x 16 Sqmm complete all as specified and as directed.

S & F for HDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP protection of IP-67 having outer dia 50 mm and inner dia of 38 mm with necessary couplers, bends etc., for protection of LT cable all as specified and as directed. Make : Gemini/ Telerex/ Prince

Supply and install steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.0 Mtr long) including material and labour for Excavation work in any type of soil (1.56 m x 1.2m x 1.2m) and PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) for foundation (1.65m x 0.6m x 0.6m) (1:4:8), PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) for coping (0.45m x 0.45m x 0.45m) (1:2:4), returning filling, removal of excavated soil including painting of poles with two coats of aluminum paint over one coat of primer and numbering of poles complete all as specified and directed.

S & F 60W LED street light fitting with following specification complete all as specified and as directed: (i) Pressure die cast aluminum housing & toughened glass with IP-66 degree of protection (ii) Individual LED's must have peanut lenses for better throw across & along the road with luminaire efficacy of greater than 110 Lumen/Watt (minimum lumen output of luminaire should be 3800 Lumens ), colour rendering (CRI) of ≥ 75 and co-related colour temperature (CCT ) of 5700K (± 500K), the luminaire should have 5 KV surge protection, PF ≥ 0.95, total harmonic distortion of THD ≤ 10% , voltage range of 140-280 V should be provided. (iii) The luminaire should have top maintainable driver compartment for easy access to driver during maintenance and the driver used must be a constant current driver with efficiency of ≥ 85%. (iv)The manufacturers logo must be embossed/ engraved in the housing of the luminaire with and including bracket for street light fittings made out of 40 mm dia GI pipe of light grade 1.5 m long each bent to shape & size required & fixed to pole with and including flat iron clamps 02 Nos made out of 40 x 5 mm flat iron including GI Nuts, bolts and washers and painting of clamps Make :- Crompton/ Philips/ Ligman/ Jaquar /Wipro /Havells / Syska/ Bajaj

S & F thermoplastic cable junction boxes for cable entry with terminal of size 250mm x 200mm x 100mm on pole with MS clamps, nut bolts, washers and glands including suitable MCB and appropriate for cable with cross sectional area 16 Sq mm 04 core complete all as specified and as directed.

S & F thermoplastic cable junction boxes for cable entry with terminal of size 140mm x 140mm x 95mm on pole with MS clamps, nut bolts, washers and glands including suitable MCB and appropriate for cable with cross sectional area 16 Sq mm 04 core complete all as specified and as directed.

S & F 2 Core 1.5 Sqmm PVC insulated PVC sheathed weather proof multistranded copper conductor cable 1100 volts grade drawn through in GI conduit, pole etc., with MS clamps from junction box to street light fitting complete all as specified and as directed.

S & F LED bollard lights 9W single phase with decorative LED bollard lights luminaire with diffuser and painted spun aluminium deflector pre wired and provision of twin core flexible wire with copper conductor of 0.5 Sqmm from light fitting to loop in box and foundation for bollard light complete all as specified and as directed. . Make of LED bollard lights : TETRIS Series No. 111771, Bajaj, Product code : BGBOS 600 9W LED or Crompton/ Philips/ Ligman/ Jaquar /Wipro /Havells / Syska

S & F energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opal diffuser pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb and removal old existing unserviceable tube light fitting complete all as specified and as directed. Make :- Bajaj/ Philips/ Wipro/ Havells/ Syska/ Jaquar/ Ligman

S & F integral 40 Watt LED post top lanterns with black ABS plastic spigot spun aluminium canopy, with opal acrylic difuser and accessories integral, Fedora hat post top lantern with clear acrylic including dismantling and taking out old unserviceable post lamp fittings complete all as specified and as directed. Make :- Bajaj/ Philips/ Wipro/ Havells/ Syska/ Ligman

S & F 35W LED street light fitting with following specification complete all as specified and as directed: (i) Pressure die cast aluminum housing & toughened glass with IP-66 degree of protection. (ii) Individual LED's must have peanut lenses for better throw across & along the road ,with luminaire efficacy of greater than 110Lumen/Watt (Minimum lumen output of luminaire should be3800Lumens ),colour rendering (CRI) of ≥ 75 and co-related colour temperature (CCT ) of 5700K (± 500K). (iii) The luminaire should have 5KV surge protection, PF ≥ 0.95, and total harmonic distortion of THD ≤ 10% ,voltage range of 140-280V should be provided. (iv) Luminaire should have top maintainable driver compartment for easy access to driver during maintenance and the driver used must be a constant current driver with efficiency of ≥ 85%. (v) The manufacturers logo must be embossed/ engraved in the housing of the luminaire including bracket for building security light fittings made out of 40 mm dia GI pipe of light grade 1.5 m long each bent to shape & size required & fixed to wall surface with and including flat iron clamps 02 Nos made out of 40 x 5 mm flat iron including GI nuts, bolts and washers and painting of clamps. Make : Bajaj/ Philips/ Wipro/ Havells/ Syska/ Ligman

M & L for Point wiring with 1.5 Sq mm single core copper conductor FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid FRLS PVC casing capping and its accessories of suitable size, heavy grade ISI marked surface on walls/ roof and MS pressed PVC terminal boxes of 1.6 mm thick of suitable size including fixing provision of cover plates for mounting the switches/ sockets / regulators etc., including running up of 1.5 Sq mm multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for One light point controlled by one, one way switch 5 Amps all as specified and as directed.

S & F ceiling rose PVC/ polycarbonate insulated body with three terminals AC 50Hz 230 volts complete all as specified and as directed.

S & F in repairs switch piano single pole flush type 5 Amps, 230 volts including removal of old existing unserviceable one complete all as specified and as directed.

Supply, install, testing & commissioning CPRI approved LT panel outdoor, floor mounted, cubical, self supported, CPRI approved make, front and rear openable, double door hinged type with locking arrangement and slopping top canopy , suitable ventilations on both sides with wire mesh, IP-52 protection with dust and vermin proof etc., fabricated out of 3.15 mm CRCA sheet duly powder coated with 7 tank chemical process, mounted / fixed on and including MS angle iron stand / frame 40 cm height from FFL, fabricated out of 50 x 50 x 6 mm thick MS angles duly painted with black enamel synthetic paint over a red oxide primer duly grouted in PCC (1:3:6) foundation, control wiring copper stranded PVC insulated FRLS cables not less than 1.5 Sqmm, suitable size / capacity of copper strips for switch gear connection from main bus bar, earth bus strip of suitable size for entire length of panel, suitable size of MS gland with gland plate and alluminium lugs / thimbles for all incoming /outgoing cables etc., complete all as directed by Engr -in -Charge including and accommodating the followings:-

M & L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6mm burried earth pit not less than 2.25m depth below normal ground level with to edge of the plate vertically to depth of not less than 1.5 m below ground level connected to & including Galvanised earth strip of size 25x4mm by mean of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR-2020 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc., complete all as specified and as directed. Note : (i) Refilling of the earth pit shall be carried out with black cotton soil. (ii) GI strip size 25x4.0mm & GI protection pipe upto 7.5 m length will be measured under this item. (iii) On testing after completion, if the desired earth resistance is not obtained the earthing will be redone to the entire satisfaction of Engr-in-Charge at no extra cost.

M & L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6mm burried earth pit not less than 2.25m depth below normal ground level with to edge of the plate vertically to depth of not less than 1.5 m below ground level connected to & including Galvanised earth wire of size 4mm by mean of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR-2020 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc. complete all as specified and as directed. Note : (i) Refilling of the earth pit shall be carried out with black cotton soil. (ii) GI wire 4.0mm dia & GI protection pipe upto 7.5 m length will be measured under this item. (iii) On testing after completion, if the desired earth resistance is not obtained the earthing will be redone to the entire satisfaction of Engr-in-Charge at no extra cost.

S & F in replacement sheet metal enclosure MCB DB SPN 4 way without bus bar 240 volts single door with including fixing of incoming & outgoing MCBs and making smooth the wall surfaces complete all as specified and as directed.

S & F MCB SPN 16 Amps 10 KA "C" series complete all as specified and as directed. Make : L&T/Legrand/ Hager/ Siemens/ ABB/ Schneider Electric

S & F 2 core 4 Sqmm PVC insulated PVC sheathed weather proof multistranded copper conductor cable 1100 volts grade drawn through in GI conduit pipe etc with MS clamps from MCB Box to motor fitting complete all as specified and as directed.

M & L for addition/ alteration in old GI pipe, screwing, cutting, threading, fixing of GI fittings like union, elbow, tees, nipples, dummy, plugs etc of upto 40 mm bore including attending any minor work regarding pipe line as directed by Engr-in-Charge. Note:- Rates for necessary GI fittings like union, tees, nipples, elbow etc is deemed to be inclusive in above quoted rates

S & F steel tubes, 40mm bore medium grade galvanized with all fittings and fixed complete laid in floors / trenches / fixed to wall and ceiling including taking down the existing old pipe complete all as specified and as directed.

S & F tubes, 25mm dia bore CPVC pipe with all fittings and fixed complete laid in floors / trenches / fixed to wall and ceiling including taking down the existing old pipe complete all as specified and as directed.

Description all as per Item No 26 above but 50 mm dia bore complete all as specified and as directed.

S & F PVC rotational moulded water tank of capacity 5000 litres two layered hoisted and fixed in position including provision of necessary inlet / outlet / over flow pipe and connected with the existing pipe lines complete all as specified and as directed.

Description all as per Item No 27 above but 2000 litres capacity complete all as specified and as directed.

M & L for clearing the area (site clearance) by cutting the trees, shrubs, roots, bushes, small trees / plants and vegetation and removing the rubbish/debris upto a distance n.exc 50m outside the pump / power house area with clean and tidy condition of any type of soil complete all as specified and as directed.

S & F ball valve, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 25 mm bore dia including taking down the existing old one complete all as specified and as directed.

S & F Gun metal /CPVC gate valve with iron wheel head, screwed both ends for iron pipe 25mm bore dia including taking down the existing old one complete all as specified and as directed.

S & F Gun metal /CPVC gate valve with iron wheel head, screwed both ends for iron pipe 40mm bore dia including taking down the existing old one complete all as specified and as directed.

S & F Gun metal /CPVC gate valve with iron wheel head, screwed both ends for iron pipe 50mm bore dia including taking down the existing old one complete all as specified and as directed.

S & F PVC AQUASAVE RR1 RO water storage tank of capacity 30 litres with autocut feature which will automatically stop RO water when tank is full with stand fittted in wall and all connecting accessories complete all as specified and as directed.

S & F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe/ CPVC pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F pumping set, 2 HP Centrifugal, electrical driven, single phase, energy efficient Totally Enclosed Fan Cooled (TEFC) Squirrel Cage Motors (IE2) 2 HP, 3000 LPH (enclosure confirming to protection IP 55 as per IS:4691-1968) horizontal foot mounted motors, continuously rated suitable for operation on 230+/-10%, 50 Hz+/5%, A.C. supply with class 'F' insulation for 50 Deg C ambient temperature and copper winding, head range 6-30m , suction and delivery size (50x50mm) and confirming to IS 325:1996 & IS 12615:2011 complete all as specified and as directed. Note : PCC stagging for pumping set of size 0.5m x 0.6m x 0.45m and cover shed suitable for pump to save from rain water are deemed to be inclusive in quoted rate.

S & F single phase DOL starter in S.S. enclosure for minimum 2 HP complete all as specified and as directed.

S & F pumping set, 1 HP Centrifugal, electrical driven, single phase, energy efficient Totally Enclosed Fan Cooled (TEFC) Squirrel Cage Motors (IE2) 1 HP, 1500 LPM (enclosure confirming to protection IP 55 as per IS:4691-1968) horizontal foot mounted motors, continuously rated suitable for operation on 230+/-10%, 50 Hz+/5%, A.C. supply with class 'F' insulation for 50 Deg C ambient temperature and copper winding, head range 6-30m , suction and delivery size (25x25mm) and confirming to IS 325:1996 & IS 12615:2011 complete all as specified and as directed. Note : PCC stagging for pumping set of size 0.5m x 0.6m x 0.45m and cover shed suitable for pump to save from rain water are deemed to be inclusive in quoted rate.

M & L for brick work based structural for water tank of capacity 2 x 5000 litres of size (6 x 4 x 1.2) Cum including painting of foundation complete all as specified and as directed.

S & F 1000 litres capacity corrosion resistance stainless steel water storage tank (cylindrical vertical with closed top) hoisted and fixed in position on PCC platform including inlet /outlet overflow connection complete all as specified and as directed. Note : PCC stagging of size 2m x 2m x 1m for the tank (0.5 mtr from the Ground Level) shall be deemed to be included in the quoted rate.

M & L for valve pit masonry chamber of size 1000mm x 1000mm x 900mm for valve constructed complete with MS sheet cover and locking arrangement including earthwork excavation, PCC foundation, Block masonry in walls, PCC coping , plastering, painting complete all as specified and as directed.

M & L for MS Iron structural for water tank of capacity 2000 litres at height of 3.2 m from GL and including base foundation complete all as specified and as directed.

Govinda Swamy Construction

M/S Sudhir Kumar Gupta