Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹82,805Accepted-AOC H NO 128 VILL POST DASHMESH NAGAR NAYA GAON PIN 160103 | NAYA GAON | S A S NAGAR | CHANDIGARH | 160103 | ₹82,805 Quoted ₹82,804.41 | L1 | Accepted-AOC Due to lower rates |
| 2 | L2₹84,644.51Rejected-Finance 500 VILLAGE MALOYA CHANDIGARH CHANDIGARH | ₹84,644.51 | L2 | Rejected-Finance Due to higher rates |
Updated dates
Tender Value
₹92,005
EMD Value
₹1,840
Closing Date
14 Apr 2026, 11:00 amClosed
EEPH Divn No. 3 Chd
EEPH Divn No. 3 Chd
Renovation of vacant House No. 2295-B (Type III) Sector 19, Chandigarh. (IBM Scheme No. W4/2025/25072)
2026_CHD_90731_1
PH3/2026/69
Open Tender
Public Health Products
30 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹1,840
27 May 2026
18 Feb 2026
14 Apr 2026
18 Feb 2026
14 Apr 2026
18 Feb 2026
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required DSR 17.3
W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : DSR 17..7
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10
Kitchen sink without drain board
610x460 mm bowl depth 200 mm DSR 17.10.2.2
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16A
Providing &fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 32mm DSR 17.28.1.1
Providing and fixing soil, waste and vent pipes : DSR 17.35
75 mm dia DSR 17.35.2
Centrifugal cast iron S&S pipe as per IS: 3989 DSR 17.35.2.2
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 75 mm outlet
Sand Cast Iron S&S as per IS- 3989 DSR 17.60.2.1
Providing &fixing G.I.pipes complete with G.I. fittings , clamps, i/c cutting and making good the walls etc. DSR 18.10
15 mm dia nominal bore DSR 18.10.1
20 mm dia nominal bore DSR 18.10.2
Providing & fixing uplasticised PVC connection pipe with brass unions : DSR 18.21
45 cm length DSR 18.21.2
15 mm nominal bore DSR 18.21.2.1
Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46
20 mm nominal bore DSR 18.46.2
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :DSR 18.49
15 mm nominal bore DSR 18.49.1
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms DSR 18.51.
15 mm nominal bore DSR 18.51.1
Providing and fixing C.P.brass stop cock (concealed) of standard design and of approved make conforming to DSR18.52
15 mm nominal bore. DSR 18.52.1
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming DSR 18.53
15mm nominal bore DSR 18.53.1
Providing and fixing of Extension nippple upto 1-1/2" length DSR 18.53A
Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76.1
with common burnt clay F.P.S. (non modular) bricks
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc DSR 18.78
Providing and fixing of C.P.Steel Grating Heavy (With hole without hole) size 4" i/d with 114gram wt. of approved make
Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal
Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO
Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO
Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO
Providing & fixing of C.PCup heavy duty of approved make
Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Studs complete all respect of approved make
Providing and fixing GI Tank Nipple 20 mm dia complete.
Providing drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
Providing& Fixing CP Nozzel Tap any approved make complete in all respect
Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make
Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm
Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.32 MB
BOQ_110953.xls
BOQ • 0.53 MB
Download all tender documents and submit your bid