MP FUND 2024-2025

Amount

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Cement concrete of mix 1:4:8 (one part of cement, and four part of M sand, and eaight part of coarse aggregate) using hard broken granite stone jelly of 40 mm gauge for foundation levelling course, including shuttering, dewatering wherever necessary and laid I layers of not more than 15cm thick complete complying with standard specifications and drawings and as directed by the departmental Engineers including all cost & conveyance of materials laying curing etc., complete as per TNDSS No 28V,VI(S2),VI(S54) and VII

Supply and filling basement with Well gravel including cost and conveyance at site in all etc

Brick work with cement mortar 1:5 mix using II foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc complete. For Foundation and Basement

For Super Structure in Ground Floor

Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting up to 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casuarinas props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items. Centering below Ground Level

Rate for Roof Slab, Lintel, Beam

Rate for Sunshade

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcemeat and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with Kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. For Foundation and Basement

For Superstructure in Ground Floor

Granolithic flooring CC 1:2:4 mix using 10 - 12mm metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Dadooing of walls with glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Supply of Steel door of size 1.10 x 2.10m including in all other charges at site in all etc

Supply of Steel Vetilator of size 0.90 x 0.60m including in all other charges at site in all etc

Supply of Rolling Shutter of the following size including in all other charges at site in all etc

Supply of Steel Window of size 1.20 x 1.30m including in all other charges at site in all etc

Plastering with CM 1:5,12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Finishing the exposed surface of RCC item of work such as slabs, beams, sunshade, facial, canopy slab, staircase waist slab, landing slab etc., with CM 1:3, 10mm thick. including raking the surface. The rate is to include the cost of providing cement mortar beading or nosing for sunshades & staircase steps, landing slabs etc., complete complying with standard specifications.

Plastering with cement mortar 1:4 mix to 20 mm thick including cost and conveyance of all materials to site and all labour charges in all etc

WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.5 by volume and laid in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden beaters if approved pattern keeping the surface constantly wet by sprinkling lime jaggery water as per standard specification etc., complete as directed by the departmental officers.

Finishing the top of Roof with One course of Machine Pressed tiles of size 0.23 x 0.23 in CM 1:3 mix to 12mm thick including all cost and conveyance and all labour charges

Distempering two coats with best quality of distember and the olour approved by the deparmental officer including cost and all Labour charges etc., complete

Interior / Exterior Emulsion Two coats over priming coat including cost and conveyance of all materials and labor charges etc complete.

Painting two coats for New steel Doors ,Windows Over the steel doors including in all charges etc complete

Supply and Fixing of Indian type Water closet 580x440mm of including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Supply and Fixing of colour glazed wash basin of size 550x 400mm - 1 No. of including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Wiringwith2x1.5sq.mm.(22/0.3)PVCinsulatedSCunsheathedcopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessoriesandwithTWswitchboxand5AFTswitchwithpainting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) SD 18

Supply and fixing of 16A DP switch of 500V with matal clad with fuse and neutral (side handle) on suitable TW board with earth connection only (SD No.142)

Supplying and fixing of 11W CFL Bulb including all cost and conveyance to work site etc complete.(SD.No.80)

Supply and run of 2 of 6sq.mm. (84/0.3) PVC in sulated SC unsheathedcopperconductorof 1100V on 7/20 GI bearer wire for service connection mains SD 66

Supply and fixing of 1200mm(48") AC ceiling fan complete with step ped electronic 300W regulator with 1meter down rod on the existing clamp SD 107

Provision for rainwater downfall pipe etc complete.

P.GOPALAKRISHNAN (BID ID -1279029)