PROVN OF CONNECTION OF EXISTING SEPTIC TANK TO MAIN SEWARAGE SYSTEM AND AREA DRAINAGE INCLUDING FENCING AT DIV A MESS AND OTHER SANCTIONED WORK IN THE AREA OF AGE B/R II UNDER GE PANAGARH

Amount

Excavation in trenches in any type of soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Removing surplus excavated spoil/earth to a distance not exc.50M and deposited where directed at a level not exc.1.5 M above the starting point complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed complete all as specified and directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed.

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed.

M&L for brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM (1:6) complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in precast manhole cover slabs set in CM (1:6) complete all as specified and directed.

M&L for TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia all as directed and specified and directed.

M&L for 15mm thick in CM (1:4) rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall complete all as specified and directed.

M&L for DWCEP (SN8) 150 mm diameter Pipes for depth of 0.7-1.65 m laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to excuted and make sewar line funtional complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for (DWC) structured wall polyethlene coupler/elbow 90/elbow 45/ end plug/reducer for piping system with non smooth external annular corrugated and smooth internal surface (Double Wall) for non presure sewage & drainage application pipes of standard length 6m, grade conforming to IS 16098 (part-II:2013) Stiffness Class SN-8 inner dia 150mm(tolerance limit plus& minus 2mm) anti rodent pipes laid in trenches complete all as specified and directed.

M&L for broken stone or boulder hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed.

Returning, filling in including spreding,levelling, watering and well rammingin layers complete all as specified and directed.

M&L for providing cement concrete 1:2:4 ( 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone agregate) as in surface channel and drain etc complete all as specified and directed.

Extra for forming fair finished drain or channel of manholes inner girth n exc 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified complete all as specified and directed.

M&L for Providing precast cement concrete type 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in landing, cover slab (for manholes etc) chullah woods, chajjas, water trough mangers, shelves, and similar articles with plain faces complete all as specified and directed.

Returning filling in soft /loose excavated soil including spreading leveling watering and well ramming in layers not exceeding 25 CM and all as specified and directed complete all as specified and directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed.

M&L for brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM (1:6) complete all as specified and directed.

M&L for RCC (Design mix) M-25 (using 20mm graded stone aggregate) in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC (Design mix) M-25 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping including use and removal of necessary formwork complete all as specified and directed.

M&L for 15mm thick in CM (1:4) rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall complete all as specified and directed.

M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for Providing precast cement concrete type B-0 1:2:4 with (using 12.5 mm graded aggregate) louvres and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item set in CM (1:4) complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified & directed

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including conforming to IS.1161 - 2014, Fe-410- W(Gde- E-250) quality- B, bent to a curve complete all as specified and directed

S&F Rolled mild steel Fe-410-W(Gde-E-250) quality B for Joist, channel, angle, or tee sections, fixed in post as in specified and as directed

S&F MS Plates plain, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe-410- W(Gde-250) quality-B complete all as specified and directed

S&F for Pre-painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to a curve fixed with self tapping screws as specified complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D-2, (using 40mm graded stone aggregate) in sub base of floor/paving etc complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block (coloured) any shape and size conforming to IS:15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for PCC 1:3:6, type C2, (using 40 mm graded stone aggregate) as in post holes, filling and mass concrete complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new iron surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surface complete all as specified and directed.

Intime Commotrade Pvt Ltd (BID ID -3093163)

RAY STANDARD ENGG CO. (BID ID -3093675)