REPAIR AND RECANNING OF STEEL AND WOODEN CHAIRS INCLUDING PAINTING AND POLISHING AT MIL STN AGARTALA

Amount

Removal of following existing unserviceable components of various wooden and steel chairs carefully without disturbing the adjoining parts and S& F new components in lieu of dismantled components/discorded components as mentioned including tightening the joints, placing every part in tact and painting/polishing the disturbed portion shade as applicable or directed by engr- in - charge as per drgs

Chair dining

a) Rear leg as per drg.

b) Front leg as per drg.

c) Side rail as per drg.

d) Front & rear rail as per drg.

e) Back rest as per drg.

f) Stiffener as per drg.

g) Plastic hard rubber shoe as approved by AGE(I) Agt

Chair wooden bottom w/o arms

a) Rear leg as per drg.

b) Front leg as per drg.

c) Side rail as per drg.

d) Front & rear rail as per drg.

e) Back rest as per drg.

f) Stiffener as per drg.

g) Seat as per drg.

Chair writing

a) Rear leg as per drg.

b) Front leg as per drg.

c) Side rail as per drg.

d) Front & rear rail as per drg.

e) Back rest as per drg.

f) Stiffener as per drg.

g) Arm rest as per drg.

h) Plastic hard rubber shoe as approved by AGE(I) Agt

Chair Easy

a) Rear leg as per drg.

b) Front leg as per drg.

c) Side rail as per drg.

d) Front & rear rail as per drg.

e) Plastic hard rubber shoe as approved by AGE(I) Agt

Chair Dining long back with cushion

a) Seat cushion made out of 50mm thick,32 density foam covered with leatherised Rexene best quality fixed over 10 mm thick plywood of as per drg.

b) Rear cushion made out of 50mm thick,32 density foam covered with leatherised Rexene best quality fixed over 10 mm thick plywood of as per drg.

c) Plastic hard rubber shoe as approved by AGE(I) Agt

Stool dressing CB

(a) Legs as per drg

(b) Long rails as per drg

(c) Short rail as per drg

(d) Long stiffener as per drg

(e Plastic hard rubber shoe as approved by AGE(I) Agt

Removing of old worn out plastic cane from various typr of chairs and re-caning with 2mm wide white plastic cane Gola China of approved quality on Godrej pattern all as per drg and directed by Engr-in-charge.

Chair CB steel with and without arms

a) Seat frame with canning as per drg

b) Back rest frame with canning as per drg

c) Hand rest as per drg

d) Iron cleat off size 65 x 19 x 3mm thick as per drg

e) Plastic hard rubber shoe as approved by AGE(I) Agt

Chair varandha

a) Removing of old worn out plastic cane from chair varandha and supply and recaning new 4mm wide white plastic cane of best quality and in mat pattern complete all as per drg.

b) Replacing of existing worn out hard rubber shoe and supply and fixing new hard rubber shoe as approved by as AGE (I) Agt.

M & L for painting of following steel furnitures by preparation of old painted surfaces of steel furnitures and painting with synthetic enamel paint (Make: Asian/berger/Nerolac) of approved shade to steel surfaces complete all as specified by engr in charge and approved by AGE (I) Agt.

a. Chair CB Steel With or Without Drawer

b. Chair Varandah

M & L for removal of existing polish from wooden surfaces of under mentioned articles of wooden furniture, cleaning the same using sand paper, smoothing properly without leaving any untouched woooden surfaces and polishing the same with two or more coats of French polish of appropriate shade, as approved / directed by the Engineer-in-Charge:-

a. Chair Dining.

b. Chair Wooden Bottom w/o arms

c. Chair Writing

d. Chair Easy

e. Chair Dining Long back

f. Stool dressing CB

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.

M/S NIYATI NETWORK (BID ID -3292372)