8271 MISC REPAIRS OF BR NATURE FOR WORK INCLUDING FLOOR TILING, PLASTERING IN MD ACCN OF A WING OF DAD COMPLEX LULLANAGAR UNDER AGE BR I SOUTH PUNE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for coloured Ceramics tiles 200 x 300 x 7 to 8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces complete all as specified and as directed.

M&L for coloured Ceramics tiles 450x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces complete all as specified and as directed.

M&L for Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match.including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

M&L for Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match.including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

M & L for (light shade) Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

M & L for ( light shade) Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick backing coat in CM 1:4 all as specified and as directed.

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar.

M & L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 on stone masonry surfaces complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20mm to 25 thick, over cement screed base laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for ready mix Rendering 10mm thick in cement mortar 1:6 on brick/concrete surfaces finished even & smooth with a thin layer of sagol complete all as specified and as directed.

M&L for 5 mm thick ready mix rendering in cement mortar (1:3) on ceiling surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore & connections complete all as specified and as directed.

S & F 15 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed.

Refixing 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore & connections complete all as specified and as directed.

S & F 20 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors complete all as specified and as directed.

Refixing 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing waste pipe etc. complete all as specified and as directed.

S & F 15 mm bore pillar taps,fancy type swan neck spout (Left) and aerator, cat No. F2002104 of CERA or of equivalent make specified here-in-after complete.

S & F 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with or without lattered " HOT" or " COLD" with long screwed shanks and fly nuts complete all as specified and as directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts,screwed for iron pipe .

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15 mm stop valves, concealed long shank, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 10 ltr capacity PVC valveless, cyphonic action type, flushing cistern, low level, white, including flush pipe 32 mm bore complete all as specified and as directed.

S & F gratings 100 mm dia of PTMT ( minimum wt 25 gms) complete all as specified and as directed.

S & F in repairs 125 mm dia swivel type brass chromium plated shower rose of approved quality complete all as specified and as directed.

Dismantling water tanks of capacity exc. 250 Ltrs and not exc. 500 ltrs removing to stores complete all as specified and as directed.

Dismantling water tanks of capacity exc. 500 Ltrs and not exc. 1000 ltrs removing to stores complete all as specified and as directed.

S&F rotational moulded polythylene water storage tanks of tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion all as spd and directed of 500 ltrs capacity, ISI marked complete all as specified and as directed.

S&F rotational moulded polythylene water storage tanks (cylindrical vertical with colsed top) hoisted and fixed in postion all as specified and directed of 1000 ltrs capacity, ISI marked complete all as specified and as directed.

S & F Transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) (Model- Joyo Cera Gls 132) complete all as specified and as directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and as directed.

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening.nexc 1.00 sqm each complete all as specified and as directed.

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening.exc 1.00 but nexc 2.00 sqm each complete all as specified and as directed.

S&F aluminium powder coated fancy type curtain rod 25mm bore complete all as specified and as directed.

S&F in repairs CP towel rail 600 mm long 20mm dia Fixed with plastic guities with steel screws etc. complete all as specified and as directed.

S&F in repairs soap dish chromium plated brass fixed width brass screws complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete including dismantling of old pipes complete all as specified and as directed.

S & F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete including dismantling of old pipes complete all as specified and as directed.

S&F PVC (SWR) bends/Tee with acess door for 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends/Tee with acess door for 75mm bore complete all as specified and as directed.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and match with complete all as specified and directed.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq. m but n. exc.4sq m each and removed to store complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match, supplied and fitted to chowkats complete all as specified and as directed.

S & F 30 mm thick Iind class hard wood glazed and skeleton shutters, divided into squares with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive gauze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

M & L preparation of new or previously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces complete all as specified and as directed.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain colour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters complete all as specified and as directed.

S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and as directed.

S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and as directed.

S & F 150mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S & F plain sheet glass 5 mm thick plain or tinted, fixed to aluminium frame in partition complete all as specified and as directed. (Note :- Beading / rubber packing is included in the rates for aluminium sections above)

Taking down shutters of any description exc 1 sqm but not exc. 2 Sqm each & removed to store complete all as specified and as directed.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with beads, each pane not exc 0.5 Sqm in area complete all as specified and as directed.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for frosted glass 3mm thick ordinary quality and glazing with oil putty or fixed with beads, each pane not exc 0.5 Sqm in area .

S & F in repairs hasp and stapple aluminium anodised safety type with MS hinges pin including bolt to hinge plate and fixed with screw 75 mm size complete all as specified and as directed.

S&F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 30"x32"x8"/10" and of approved quality of finish, ISI Mark complete all as specified and as directed.

S&F in repair two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed.

Taking down / cutting steel window shutters by means of gas cutter without disturbing of soffit / jambs / cills etc. of any description n.exc. 1.5 sqm (without taking off guard bars) complete all as specified and as directed.

S&F in repair three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

Dismantling boarding , any description, fixed in any position with screws complete all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board both side decorative face, including providing second class hard wood 6mm thick beading for edges of board alround complete all as specified and as directed.

M&L for 12mm thick prelaminated particle board one side decorated choice laminated and other side balancing white lamination for replacment of panels of aluminium partition or panels of aluminium doors complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primer on walls all as specified and directed

M&L for complete removal of existing treatment and applying 2mm thick wall care putty and applying two coats of oil bound distemper on walls all as specified and directed

M&L for complete removal of existing treatment and applying two coats of white wash on ceiling complete all as specified and directed

M&L for preparing old painted wooden surfaces of any description,over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any descrition exc 10 cm width or girth and applying two coats of synthetic enamel paint all as directed.

S & F hasp and stapple aluminium anodised safety type with MS hinges pin including bolt to hinge plate and fixed with screw 75 mm size,fixed as in repairs

S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters/ any number member of panels) with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile as per IS : 1003 (Part I ) kiln seasoned and chemically pressure treated all as specified and as directed.

M&L for providing cement concrete type C-1, PCC (1:3:6) (using 20mm graded stone aggregate) 75 mm thick as in plinth protection finishing even and fair on top using extra cement with 6mm wide joints throughout the thickness of plinth protection all as specified.

M&L for carrying out non destructive water proofing treatment to sunken slab of toilets/ Bath/ Kitchen/ WHB area etc. including cleaning of surface with wire brush to removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/ cracks in floor and wall joints of floor/ wall all as per manufactures insrtuctions complete all as specified and as directed. (Make:- AQYATYTE, CREAT, SEAL, grouting compound of Ashwin Enterprises, GPSS (Ground Penetrating scalling systems) of Saga Polytech or similar brand as approved by GE)

Raj Construction Company

M/s.BAJRANG CONSTRUCTION

REKHA ELECTRICALS

SARATH ENTERPRISES

M/S Sandeep Enterprises

Parhar Enterprise

M/s Omkar Associates

L.K.R.TIWARI CONSTRUCTION