SITC of Vertical wet well type 3.14 cumec pump (3 Nos ) at 6.38 M design head with other pumpspares, SITC of 3.3 KV 270 KW (2 Nos) HT Motor and SITC of double girder box type 15 Toncapacity EOT crane at Malkisar Pumping station

S I T C of Vertical wet well type pump complete with Bowl assembly, column pipe, deliveryTee, motor stool, shafts, bearings, bearing housing, pressure gauges, Bearing temperaturegauge, sole plate conforming to IS 1710One complete spare set of sleeve and neoprene bush and min efficiency not less than 87 percent at Rateddischarge and Static Head complete with all accessories as per specification and approved make,carrying of third party inspection, transportation up to site, loading, unloading, erection, Commissioning, Testing, Three month trial run and one year defect liability. For Additionaltechnical parameters of product / work refer Annexure A attached with this BSRFor static head 4 meter to 6 meter Design discharge 3.14 cumecs (Static head 5.72 M)

Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like oil retainer sleeve, retaining washer, adjusting nut(chuck nut) ,dial type temp.indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design ofpump including work of Decoupling of motor, removing of motor from stool, removing of couplingand bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motor on stool, testing and trial of pump, work shall be carried out as per pre approved design drawings. 1.2 to 2.15 cumec pump of static head 4 to 8 meter (1.7 cumec static Head5.72 M)

Providing and fixing of Gland packing Box for VT pump complete with all accessories likeGrease cup with NRV, packing pieces, gland bush (Gun metal) ,Gland Box cap (gun metal) ,water slinger assembly (C.I.), gasket etc, Decoupling of motor, removing of motor from stool,removing of coupling and bearing hub assembly, dismantling existing gland box from pump, fitting of new Gland packing Box , recoupling and fitting of motor on stool, testing and trial of pump. 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter ( 3.14 cumec , Static Head 5.72 M )

Providing and fixing of Gland packing Box for VT pump complete with all accessories likeGrease cup with NRV, packing pieces, gland bush (Gun metal) ,Gland Box cap (gun metal) ,water slinger assembly (C.I.), gasket etc, Decoupling of motor, removing of motor from stool,removing of coupling and bearing hub assembly, dismantling existing gland box from pump, fittingof new Gland packing Box , recoupling and fitting of motor on stool, testing and trial of pump.1.2 to 2.15 cumec pump of static head 4 to 8 meter (1.7 Cumec , Static head 5.72M)

Supply of impeller shaft fitted with shaft sleeves for following rating pump (material SS-410) 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter (3.14 cumec , Static Head 5.72 M )

Supply of intermediate shaft fitted with shaft sleeves for following rating pump (material SS-410) 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter (3.14 cumec , Static Head 5.72 M)

Supply of Top shaft fitted with shaft sleeves for following rating pump (material SS-410) 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter (3.14 cumec , Static Head 5.72 M )

Supply of Column pipe for VT pump complete matching with existing system and as per preapproved design drawings (Material M.S.) 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter (3.14 cumec , Static Head 5.72 M )

Supply of Pump pulley (coupling) with coupling nut and bolts, keys (to couple VT Pump withmotor)

Providing and Fixing of IK08, IP 66 protected 150 Watt High Power LED Flood Light withsingle piece Pressure die cast aluminium housing, toughened glass diffuser with suitable lenseson LED to achieve various beam angles.BIS certified and Trade mark certified.OEM Must have itsown in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/Report with liable warranty of product/accessories from OEM shall be submitted. Make –Bajaj/philips

Elec. Shock proof rubber matting 2000x1000x12 mm

Providing and fixing of Foundation girder set of VT Pump assembly including of Design,drawing, fabrication, transportation- supply , fixing as per existing Mechanical and civil structure,erection, testing, painting with applying two coat of zinc chromate red oxide primer and three coatof synthetic black enamel paint and complete commissioning all scope of works as perspecification with removing of old set .

Bearing 29318 E1

SITC of 3.3 KV Vertical squirrel cage three phase induction HT motor confirming to relevant IS standard complete with all accessories including carrying out of detailed design drawing, third party inspection,erection,loading, unloading, transportation, testing, commissioning, three month trial run and one year defect liability. 270 KW

SITC of double girder box indoor type EOT crane having 7 metres span and 12-15 metres lift, pendent operated from floor, complete with all accessories and manual chain pulley block system 10 ton capacityas per specification and approved make confirming to IS:3177,3998,807,transporation, loading, unloading, erection, commissioning, Testing at site and one year defect liability SWL 15 tonne capacity

Providing and Fixing of Shrouded Bus Bar (GI) type DSL system for EOT crane

Providing and Fixing of Rail for Long travel of EOT crane for both side bay length ( total running lenth is 55+55=110 mtr )

SITC of Complete Discharge bowl assembly conforming to IS 1710 and min. efficiency notless than 87 percent having Rated discharge capacity and total static head complete with allaccessories as per specification and approved make , including work of dismantling of existingpump , providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubberbearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump, One complete spare set of sleeve and neoprene bushand carrying of third party inspection, transportation up to site, loading, unloading, erection,commissioning Testing ,Three month trial run and one year defect liability. For Additional technical parameters of product / work refer Annexure A attached with this BSR For static head 4 meter to 6 meter Design discharge 3.14 cumecs ( Static Head 5.72 M )

SITC of 200AH capacity 2.0 volt , SMF type of approved make as per existing system.

Providing and fixing of Thrust bearing housing for vertical wet well type pump with allaccessories like oil retainer sleeve, retaining washer, adjusting nut(chuck nut) ,dial type temp.indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design ofpump including work of Decoupling of motor, removing of motor from stool, removing of couplingand bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motor on stool, testing and trial of pump, work shall be carried out as per pre approved design drawings. (Excluding Bearings) 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter