Godavari Pushkaralu-2027

Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates including cost of all materials, machinery, labour, formwork, centering, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc.,complete for plain concrete works with initial lead upto 1 km and all lifts. ( Cement content : 280 kg / cum with use of super plasticiser, CA : 0.80 cum, Blending Ratio of CA -- 65:35, FA : 0.44 cum (50% of ordinary sand and 50% of manufactured sand)

Supply and erecting fencing of section having size 2450 mm in height from ground level and 1200mm width by using angle iron size 50x50x6mm erected in CC foundation 15x15x40cms deep. The section of the frame shall be fitted with flat iron supports of size 25x6mm on top, bottom and middle and chain link jali of 8 SWG G.I to the angle iron at every distance of 30 cms by iron studs complete duly painted with one coat of red oxide and two coats of aluminium paint.

Supplying and fixing railing using 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings, vertical posts placed at 1.2 m center to center and each post of height 0.915 m above ground level and 0.38 m below ground level and 2nos horizontal pipes as per approved drawing including the cost of pipe & its fittings &labour charges complete.

Supplying and fixing railing using 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings, vertical posts placed at 1.5 m center to center and each post of height 1.50 m above ground level and 0.38 m below ground level as per approved drawing including the cost of pipe & its fittings &labour charges complete.

Laying of Sand Bags in the stipulated places including cost of empty cement bag, sand, thread, stitching charges and labour charges etc., with 13.615% overhead charges andcontractors profit.

Excavation and removal of silt and silt mixed with sand from canal bed in dry condition including disposing off the same in spoil bank or on the canal embankment in layers as directed etc., complete with initial lead upto 50 m and all lifts.

Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

Supply and erecting ISI make submersible pumpset suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H type clamps of suitable size and strength including cost of all materials, Transportation and labour charges . Makes: Varuna / Flowell / Waterman / Techno / Mahavir / unitek / Fitwell / Ellen / Karvel / LPS / Duke / Varsha / Ajantha / Narayani / Sai Varsha / Sterling / Duke / Samudra / Ajantha

Supply of 25 Sqmm 3.5 Core XLPE insulated,1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal /Polycab / Havells / KEI / RR kable

Supply of 63A/100 A, 4 pole MCCB Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 16 kA with thermal magnetic release Panel Mounted. Makes : LK - D sine / Schneider-NS NSX / Legrand -DP X3/ Siemens-3V / Hager-h3 / C & S-Winbreak / BCH / Havells / Eaton

Supply of 10 Sqmm 4 Core PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:2010 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL / Sudhakar / Bonton / Rajnigandha

Supply & Fixing of Star Delta Starter 415V, Three phase, 50Hz. With Sheet Steel enclouser comprising of contactor with bi-metalic relay with neceSheet Steelary push buttons, etc., complete suitable from12.5HP to 15HPMakes: Siemens / Crompton / LK / BCH.

Supply, installation, testing and commissioning of 100 mm C.I. non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / Leader/ Zolotto / Intervalve / Honeywell

Manufacture, Supply,& delivery of OD 110mm 10Kg/Sqcm High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc.,complete(Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 Metres.) (Public Health Items (Part –IV) SoR 2025-26)

Manufacture, Supply,& delivery of OD 63mm 10Kg/Sqcm High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc.,complete(Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 Metres.) (Public Health Items (Part –IV) SoR 2025-26)

Supply, Transportation and fixing of 65mm Dia 90 ° bend with length of 20cm (Center to face) galvanised GI bends heavy duty with threaded at both ends for installing the pump set including cost and conveyance of all materials, taxes etc., complete.

Manufacture, Supply, & Delivery of HDPE fittings of OD 63mm MS End Caps conforming to IS 4984 - 1995 including transportation to anywhere in T.G. Excluding taxes.

Manufacture, Supply, & Delivery of HDPE fittings of OD 110mm MS End Capsconforming to IS 4984 - 1995 including transportation to anywhere in T.G. Excluding taxes.

Supplying & fixing OD 65mm GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges complete for finished item of work.

Supplying & fixing OD 15mm GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges complete for finished item of work.

Supply, Manufacture Making to Specified design and labour charges for fabricating structural steel works including cost of welding rods, powercharges,etc complete.

Supply and fixing of J- Bolts 30 cm long

Operator charges for pump operations during the Pushkaralu

Removing of 10 HP pump sets, battery taps and all corresponding accessories and including loading, unloading,transport to godown and all complete item of work after Pushakaralu.

Supply and fixing of 63mm PPR Ball Valve conforming to DIN Standards 8077/8092

Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 260 kg / cum with use of super plasticiser(0.4% by wt. of cement),CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum)

Manufacturing and supply of Ladies Dress changing compartments on Pushkar Ghasts of size 2.0 X 1.2 M and 3.00 M Hight with 80 MM square pips and GI Sheets on sides and Top with GI sheet Door of size 2.5m x 3m and fixing into floor with 0.3X0.3X0.45 M15 concrete pedastals and all other necessary fittings, weldings and installing as per directions of the engineer in charge