GE (N) P/T - 34 OF 2024-2025 ADDN/ ALTN TO BLDG NO 146 ARTY BRANCH OF HQ SC PROVN OF AREA DRAINAGE AT 11MM IN AOR PROVN OF VIEW CUTTER AT 1A COYAJI MARG AND SPE REP TO WOODEN WINDOWS OF MAIN BUILDING OF PCDA (A) UNDER AGE B/R (C) OF GE (NORTH) PUNE

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Dismantling aluminium partition any description and in any position complete all as specified and as directed.

M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for preparation of New plastered wall surface and applying two coats of acrylic distemper oil emulsion over a coat of alakli resistant primer over a thin layer of wall care cementeous putty complete all as specified and as directed.

Excavating in post holes in hard/dence each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M & L for cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

M & L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S & F steel colums, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or angle, channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-290 (Gde E165)

S & F Rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe-250 ( Gde E165 ) complete all as specified and directed

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

-Ditto- all as per item no 13 above here in before but plain sheets on riges,valley gutters and similar works etc complete all as specified and as directed.

Filleting in any position and to any shape in cement mortar 1:4 exc.25 but n exc. 50 sq.cm including all mitres, stops, etc complete all as specified and directed.

Raking out joints of random rubble or polygonal rubble uncoursed or brought up to courses stone walling built in cement mortar complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar (1:4) on stone surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge.

Material and labour for false ceiling with made up of size 1800mm x 1200mm x 12.5mm thick, tapered edge gypsum board (Gypboard) Plain (conforming to IS 2095-Part 1:2011, Certified board) screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc Joint Paper tape fixed on metal grid of hot dipped galvanized steel sections and suspended as per manufacturer's specifications and instructions including preparation, primer, putty and two coat oil emulsion complete all as specified and as directed.

Material & labour for decorative PVC false Ceiling of SVP 08 Golden Oak & SVP 18 H Profile fixed with machine screws on GI channel 18 gauge thick grid work, main joist placed at 750 mm centers, secondery joist placed at 450mm centers, GI angle suspenders from roof / truss support complete all as specied and as directed.

M&L for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sqcm and not exceeding 25 Sqcm and fixed in decorative pattern including preparation of surfaces and applying two coats of acrylic distemper over a coat of primer matching with the colour of ceiling complete including dismantling of existing all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and as directed.

M&L 25 mm thick plain cement concrete (1:2:4), type B-O (using 12.5mm graded stone aggregate) as in sub base as leveling coat including demolition of existing cement concrete complete all as specified and directed.

M&L for double charged vitrified ceremic tiles 8 to 10 mm thick (square/rectangular) polished, area of each tile exc. 0.42 sqm not exceeding 1 sqm, in flooring etc , laid over and including screed bed of 15 mm thick in cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade complete all as specified and directed.

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for coloured glazed exerior cladding ceramic tiles of size 300 x 600x 7 mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles & including 10mm thick backing coat in CM 1:3 complete all as specified & directed.

S&F for 5mm thick coloured Aluminium Composite Panel (Sheet) fixed on Aluminium frame work fixed with screws, cover joints filled with silicon and tape as in semi circular/rectangular sunshade of windows, doors,gate or in wall cladding/ column, fixed over frame to shape semi circular/ rectangular complete including taking down existing panel if required all as specified and as directed. Note: Frame work shall be measured and paid separately as supply and fix.

S&F for aluminium anodised framing of square hollow pipe complete all as specified and as directed.

M&L Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet PVC sheet inclusive of solvent cement and fixing at site on PVC frame as specified and directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing and as specified and directed.

M&L 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 300mm x 300mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 300 x 600x 7 mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles & including 10mm thick backing coat in CM 1:3 complete all as specified & directed.

Material and labour for second class hard wood plain fillets, square, rectangular or triangular in section, bull-nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails or brads, sectional area exc 06 and not exc. 13 Sq.cm complete all as specified and as directed.

Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah wall panelling to the size and pattern complete all as shown on drawing and as directed.

Material and labour 4mm thick one side decorative group match veneer plywood and application of resin pigment and hardener to desired colour and pattern and applying two or more coats of melamine polish with spray guns, compressor etc till the desired glossy surface is obtained complete all as specified and as directed.

M&L for 1st class hard wood preparation of new wood or wood base surfaces and applying malamine polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

Taking down shutters of any description, area exc.1.5 sqm and not exc. 4 sqm each complete all as specified and as directed.

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including glass opening having size 100mm x 100mm complete all as specified and as directed

S&F 150 mm brass handles, cast type,polished bright fixed with screws complete all as specifed and directed by Engr-in-Charge

S&F in repairs floor door stopper of brass body and tongue with hard drawn steel spring of over all length of cover plate 150mm complete all as specified and as directed.

S&F aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete all as specified.

S&F in repair stainless steel mortice lock,vertical type, size 100mm with 4 levers fixed to door complete all as specified

S&F for 200mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as direcetd

S&F 100 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed complete all as specifed and directed by Engr-in-Charge

Taking down chowkats or frames with shutters (without taking off shutters from frame) area n exc.1.5 sqm each complete all as specified and as directed.

All as per item No 48 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed

Material and labour for preparation of new untreated wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking Down Old RCC Lovered Jalli/ Jaffery without harming the exisiting wall of Stone/ Block or Bricks masonry complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge.

Supply and fix aluminium anodised powder coated three track sliding window with two glazed shutters, one shutter with and including 4mm thick ordinary quality float glass and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc. complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Material and labour for 8 to 10mm thick PVC prelaminated Gypsum board false ceiling board on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.0 mm x 20 mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 25 mm x 25 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age, Gyproc as approved by GE.

M&L for excavation in trenches n.exc 1.5 m wide and n.exc. 1.5mtr depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/ Dense soil all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Hard/dense soil complete all as specified and directed

Removing excavated material (Soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces mixed with liquid water proofing as per manufacturer's instructionwith, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only liquid waterproofing will be measured and paid separately).

M & L for Plain Cement concrete Type B 1 1:2:4 (20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M & L for Setting coat 3mm thick, trowelled to even and smooth finish in cement plaster 1:2 complete all as specified and as directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed

Add or deduct for each 25 mm girth or part thereof over or under 30cm for forming fair finish drain or channel in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B2 (using 40mm graded broken stone aggregates) as in surface channel and drain including forming fair finished drain or channel any girth, using extra cement, including forms, moulds, mitred/stopped ends etc. including demolition of existing concrete complete all as specified and as directed.

M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

S&F GI dash fastener 8 to 10mm dia and 100 to 125mm long with GI Washer of suitable dia and thickness and nut including drilling hole in masonry/ concrete wall by means of electrical driven drill machine complete all as specified and as directed.

S&F 1st class hardwood 30 mm thick Glazed and skeleton windows shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Ditto as per item No 68 but semi-circular, worked from the solid in two or more sectors, dowelled and keyed with double-headed hardwood keys complete all as specified and directed.

S&F 4mm thick frost sheet glass ordinary quality in any type of frames and glazing with beading in square n. exc. 0.5 Sqm in each pane complete all as specifed and as directed

S&F 4mm thick frost sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square exc. 0.5 Sqm in each pane complete all as specifed and as directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses,pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC casing caping including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge)modular white cover plate & frame after chasing in stone masonary walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following. One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

Description all as per item No 73 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed

Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.

Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.

S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed

Supply and fixing 20/22 Watt LED Batten aluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020

S & F for recess mounted 2' x 2' square LED panel 36 watts, 596 x 596 x 9mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- Halonix HLFPR22-11-36-CW-37mm, Philips RC383B LED 4000 PSU ODWH PIR, Jaquar LULTU1S036XC.

"S & F in relacement for LED down light recess mounted luminare, round/square type 15 watts as per site requirement with efficiency of 1500 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz all as specified. Make- JAQUAR Cat part No. LNEP01S015XN/LLCN01R01SXN, Halonix HLDLR31-15CW/ HLDLR-S27-15-CW,Philips DN296B LED 15S-6500 PSU WH."

Supply and fixing picture light / Muziris picture light for wall 12 watts complete all as specified and directed

Supply and fix hanging light 12 watts complete all as specified and directed

S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed

S & F for VTPN DB Phase segregated double door vertical type 8 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection provided with insulated vertical phase busbars, blanking plates and circuit identification labels, double door with locking system including necessary provision for inserting the DBs for mounting in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall or mounting on surface complete all as specified and as directed (Make:-L&T , Schneider, C&S )

Supplied and fixed Four pole MCCB, Thermal Release Range 63-125 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed.. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

S & F S & F sub main wiring with approved colour coding as per IS with four single core PVC insulated FR-LSH cable with stranded copper conductor of size 10 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Four runs of main copper wire, two run of earth wire cable & PVC conduit shall be measured together as one length).

S & F sub main wiring with approved colour coding as per IS with four single core PVC insulated FR-LSH cable with stranded copper conductor of size 16 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavy duty of suitable size including concealed in wall in stone masonary etc two runs of PVC insulated with 16 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked,

S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Automberg, Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

S & F for plastic body exhaust fan, AC single phase, 240 V of size 150 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Automberg, Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

S & F for metal body exhaust fan, AC single phase, 240 V of size 300 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Automberg, Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

Supply and fixing Decorative ceiling fans working on single phase input voltage 140-285 , Sweep- 1200 mm, Power 32 W, 345 RPM , with 232 Air delivery CMM (m3 /min), complete with compact BLDC Motor, blades, down rods, electronic regulator and accessories, including making connections with provision of flexible wire 23 /0.0076 twin core copper conductor from ceiling rose/connector to fan complete all as specified & as directed. Make : Havells Stealth Air Ceiling Fan (Pearl white)

Supply and fixing ceiling fans working on single phase input voltage 140-285 , Sweep- 1200 mm, Power 32 W, 345 RPM , with 232 Air delivery CMM (m3 /min), complete with compact BLDC Motor, blades, down rods, electronic regulator and accessories, including making connections with provision of flexible wire 23 /0.0076 twin core copper conductor from ceiling rose/connector to fan complete all as specified & as directed.

Supply and fix wall mounted fan 400 mm sweep oscilating type suitable for operation on 230 volt 50 HZ AC supply complete with necessary fixing arrangements

Supply and fix for Modular AC Socket plastic body single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB SP 20/ 32Amps including removal of old unserviceable one complete all as specified and as directed.Make - Scheinder/Legrand/L&T/ ABB

Supply and fixing Modular white cover plate with frame 1 module complete all as specified and directed

-Ditto- all as item No 99 above but 2 module

-Ditto- all as item No 99 above but 3 module

-Ditto- all as item No 99 above but 4 module

-Ditto- all as item No 99 above but 6 module

-Ditto- all as item No 99 above but 8 module

Supply,installation,testing and commissioning of ceiling mount auto light occupancy, dual technology sensor,adjustable of delay timer, infra red and ultrasonic detection,Dia 8meters IP 20, 3 wire with neutral optimum distance between 2 sensors should be 6 Mtr, stand by consumption 0.8W, fixed directly to a false ceiling with mounting claws (included) or installed in a battibox depth 50 mm all as specified and directed. Note:- All necessary FRLSH copper wires to connect complete lights of office bldg/OR living/Messes etc are deemed to be included in the rates quoted above for motion sensors. Make : Legrand Cat no 048806, SWG 12582DB12 of Siemens, MTN630919 Schneider.

Supply and fixing in repairs modular Switch fabio classic white series/ Switch fabio classic white with indicator, ISI marked 6 AX Amps One Way switch complete all as specified and directed.(Make:- Cat Part No AHFSXXW061 of Havells or equivalent in Indoasian/Legrand/Anchor/Crabtree/Infinity).

Supply and fixing in repairs modular Switch fabio classic white series/ Switch fabio classic white with indicator, ISI marked single pole, one way, 16 AX Amps One Way switch complete all as specified and directed.(Make:- Cat Part No AHFSXXW161 of Havells or equivalent in Indoasian/Legrand/Anchor/Crabtree/Infinity).

Supply and fixing in repairs modular socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin fabio series 6 Amps 3 pin universal socket with child safety shutter, Shrouded terminals compatible with all standard mobile chargers, ISI marked for the same board complete all as specified and directed. (Make:- Cat Part No AHFKPXW063 of Havells or equivalent in Indoasian/Legrand/Anchor/Crabtree/Infinity).

Supply and fixing in repairs modular socket (Fabio classic white) outlet multipurpose having provision for 3 pin, 16 Amp and 3 pin, 5 Amp shuttered socket (heavy duty) 3 pin unversal socket with child safety shutter, Shrouded terminals ISI marked for the same board complete all as specified and directed (Make:- Cat Part No AHFKCXW253 of Havells or equivalent Havells/Indoasian/Legrand/Anchor/crabtree/Infinity).

Supply and fixing in repairs modular 5 stepped type electronic fan regulator- 2M 100W for 230 volt 50 Hz AC supply laser marking as reqd at site complete all as per specified and directed. (Make:- Cat Part No AHFRFXW004 of Havells or equivalent Havells/Indoasian/Legrand/Anchor/crabtree/Infinity).

Supply and fix Red and Green office fancy indicator light (Plastic body) with lamp including all connections and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

K.S.JITE AND SONS (BID ID -3214305)

ANIL CONSTRUCTION CO. (BID ID -3213151)

RELIABLE ENTERPRISES (BID ID -3214022)

GRACE CONSTRUCTIONS (BID ID -3207892)

AJINKYA VIKRAM GAIKWAD (BID ID -3213791)