SPL REPAIR TO BLDG N0 P-41, P-63/1-4 AND SPL REPAIR TO BER OLD UNSV CENTRIFUGALE PUMP AND MINOR WORK UNDER AGE BR-I OF GE N MAMUN

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed.

All as per item no 4, but frame/chowkhat size 100x60mm

All as per item no 4, but but frame/chowkhat size 75x50 mm

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed

S&F 35mm thick 2nd class hard wood glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete all as specified and directed

M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over shop coat of primer complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead f plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet s for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling ofwood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading unsed inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white and with weight of sheet not less than 9 kg/sqm as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed.

S & F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified & directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complate all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F 150 mm helical door spring for door closer including roller and roller plate, complete all as specified and directed

S&F 100 mm long hasp and staple , mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws complete complete all as specified and directed.

S&F in repair 20mm dia fancy type dropery rod of wooden shade with PVC bracket and PVC finials over door and window fixed with steel screw and pvc cleat complete all as specified and directed.

Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles and removal of rubbish out off the premises, etc complete all as specified & directed.

Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish out off the premises, etc complete all as specified & directed.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and smooth without using extra cement with WPC over finishing layer complete all as specified and directed. (Note WPC shall be measured and paid seperately)

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed.

M&L preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint including curing complete all as specified & directed.

M&L preparation of new wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of acrylic, antifungal emulsion exterior weather proof paint over primer complete all as specified and directed.

M&L Preparation of new plastered surface of walls, applying wall care putty to desired even and amooth and levelled surfaces (any thickness) and aaplying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and directed.

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and directed.

M&L Preparation of old surface after complete removal of existing treatment applying wall care putty to desired even and amooth and levelled surfaces (any thickness) and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coat of cement base paint including over a coat of alkali-resistant priming paint complete all as specified and directed.

M&L two coats of white wash on surface of wall including preparation of old plastered surface after complete removal of existing treatment complete all as specified and directed.

M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) and removal of rubbish out off the premises, etc complete all as specified & directed.

Demolition/breaking/cutting of existing cement concrete(reinforced) as in kitchen chimney/chulla hood and the similar,and making good the disturbed surface of wall with CM (1:3)without using extra cement finished even & smooth complete all as specified and directed.

M&L cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed.

M&L 25 mm thick PCC1:2:4 ,type B-1(20 mm graded aggregate) in flooring complete all as specified and directed.

M & L screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specifed and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement. all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough, incl taking down cement plaster on walls etc complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm or 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm complete all as specified and directed.

M&L green Marble work 15 mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair case trade & riser etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra complete all as specifed and directed.

Round chamfering, to the edges of marble slabs complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia complete all as specified and directed.

S&F 15mm bore dia tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 15mm dia bore medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth complete all as specifed and directed.

S&F 20mm bore dia tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

S& fixed in repairs Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed.

S&F in repair Bib taps for 15 mm bore dia pipe, cast copper alloy screwed down crutch butterfly handle with brass furrelo fixed in repairs complete all as specified and directed.

S & F in repairs Vitreous china wash basin, white flat back,size 550x400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread, complete all as specifed and directed

S&F 15mm bore dia pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed.

S&F in repair 20mm dia towel rail CP 600 mm long complete all as specified and directed.

S& F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.

M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in foundation filling and mass concrete (sunken floors etc.) all as specified.

M&L for Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm (WPC shall measured and paid separately) complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing RCC/ PVC tank of any capacity complete all as specified & directed.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore.

Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc, including cleaning or refixing or removal to store complete all as specified and directed.

S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm dia bore complete all as specified and directed.

S&F in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified and directed.

S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.

S&F in repair 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

S&F in repair Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked, fixed in repairs all as specified and directed.

S&F in repair in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified and directed.

S&F in repair 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.

S&F in repair 50mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and directed.

S&F in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair Cast Iron Branch peices, Double (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked,complete all as specified & directed.

S&F in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete complete all as specified and directed.

S&F in repair cast iron cowl for 50 mm dia complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F stainless steel kitchen plate rack of size 750 x 900 mm of approved make fixed with mild steel screw complete all as specified & directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down brick tiles,terracing tiles, single layer from roof laid, bedded and pointed in any mortar all as specified & directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete and removal of rubbish out off the premises, etc complete all as specified & directed.

M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed.

M & L for cement concrete (1:2:4) type " B1 " ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and directed.

M&L for APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

M&L for 40mm thick brick tiles laid on cement mortar & joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement over and including 15mm thick screed bed or bedding layer of mortar in CM 1:6 etc complete all as directed.

All as item 97 above but except brick tile using serviceable brick tile retrieved from item above complete all as specified

Supply only liquid water proofing compound complete all as directed.

M & L for repair, breaking of loose reinforced concrete filling with PCC 1:1.5 :3 type B0 using 12.5mm graded crushed stone aggregate (after getting the replacement of correded reinforcement redone or welded to existing reinforcement at places ( if required) includding necessary scaffolding and formwork as in chajjas,sunshades,roof projections, fascias and the like , rubbish off the premises complete all as specifed and directed. Note :- Reinforcement shall be measured and paid seperately.

M&L for Providing and injecting chemical emulsion for post constructional anti-termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litre per linear meter including drilling and plugging of holes etc in apron/plinth protection complete all as specified in IS-Code 6313 Part (3) : 2001 complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for post constructional anti-termite treatment of soil under existing floors using chemical emulsion @ one litre per hole 300 mm apart along the junction of floor and wall, along joints in floors including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floor complete all as specified in IS code-6313 Part (3) : 2001 complete all as specified and directed.

Excavation and trenches n. exc 1.5 m wide and n.exc 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outof manhole, as in any type of soil complete all as specified and directed.

Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point and disposal complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in fdn filling and mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels & drains,benching of manholes complete allas specified and directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc complete all as specified and directed.

M&L concrete bed to drain pipes incl benching under and haunching in cement concrete 1:3:6 type C2 for 200 mm dia pipe complete all as specified and directed.

M&L 200 reinforced cement concrete pipes class NP2 with one collar per length of pipe complete allas specified.

M&L cutting into existing manholes (150/200mm bore pipe) for connecting new drains,making good to pipe and rendering,cutting out existing benching for and forming branch cahnnel(1/2 round or 3/4 section) incement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

M&L for 75 mm thk PCC 1:4:8 type D-2 ( 40mm graded crushed stone aggraget) as in subbase to flooring complete all as specified and as directed.

M&L for 25 mm thick Sand cushioning under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 60 mm thick grade of concrete M-35 with cement and coloured pigment of non fadable with epoxy coating complete all as specified and as directed.

M&L Precast cement concrete in type B1(1:2:4) using 20 mm grade aggregate as in landings, cover slab , manhole cover etc, water troughs, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed. (Note:- Reinforcement shall be measured and paid separately)

M&L for cement concrete 100 mm thick type B-2 (1:2:4) using 40 mm graded crushed stone aggregate complete all specified and directed.

S&F Solid frame wooden high density filament(HDF) double rebated size 125x62 mm processed with polyyolefin's and different woof fiver, fixed to opening including necessary fixing lugs, hinges, lock striek plate etc complete all as specified and directed. Make:- HR Enterprises, Polycon, Rajashree Plastiwood

S&F 35mm thick H.D.F prelaminated (Wenga/Teak colour) moulded shutter 35 mm thick puf (polyurathane foam) insulation with minium density 40kg/cum filled in between two HDF sheets of thickness 3.2 mm both & border covered with 10 mm thick PVC sheet as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed.

S & F Aluminium powder coated ( thickness of powder coating not less than 50 micron)frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F aluminium powder coated ( thickness of powder coating not less than 50 micron) door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door(5" Inch Iron/Silver Babylatch Bathroom mortise key less Door Handle), hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F figuered glass of approved design having 5 mm thick ordinary quality and glazing with suitable beading exc 0.5 sqm in each pane complete all as specified and directed.

S&F for door hydraulic closer hydraulically regulated, designation no 3, universal type, suitable for door shtter of 851 to 1000 mm in width and fixed complete all as specifed and directed.

S&F pre-laminated 18 mm thick lead free factory made 100% Solid WPC (Wood Polymer composite) sheet having high natural fiber contains 25 to 30 % wood colour sheet with density not less than 600 kg /Cbm bent 90°and the weight of sheet of 1 sqm should be 11 kg(+/- 5%) manu facture by ISO-9001-2015 certified company, the sheet should be 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard,Cabinet etc complete all as specified and directed.

All as per Srl item No 124 but both side prelaminated.

S& F for 125 mm long fancy type handles(as per sample) as in cupboard/ cabinets complete all as specified and directed.

S&F Continuous (piano) hinges,(Width of flaps in 30mm (when open), mild steel, bright finish or lectrogalvanised (as per sample) complete all as specified and directed.

S&F 150 mm size fancy type, stainless steel brignt finish handle (as per sample) complete all as specified and directed.

M&L for joint free non skid Ceramic floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, approved colour and design as in floor set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick CM(1:4) screed bed, including dismantling of existing floor tiles and cement mortar all as specified and directed

M&L glazed ceramic coloured tiles of Ist quality of size 1200mm x600 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, and shade as approved by Engr-in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with greycement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete incl dismantling existing wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified & directed.

Providing and fixing of 15-18 mm thick granite of machine cut single piece, mirror polished, premoulded and prepolished, as in side and top of vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc and taking down of existing any type of tiles/granite of any description complete all as specified and directed

S&F fancy type Stop valve/ Angle valve cast copper alloy (make:- Jaquar Code No CON-CHR-053KN or equivannt as per approved makes) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed.

S&F in repair fancy type Bib taps for 15 mm bore pipe, chromium plated cast copper alloy (make:- Jaquar code no CON-CHR-047 KN or equivalent as per approved makes) screwed down crutch butterfly handle with brass furrelo fixed in repairs complete all as specified and directed.

S&F in repair health faucet hand shower 8mm dia 1m long flexible hook and wall hook Make - Jaquar code no-ALD-CHR-587 and equivalent as per approved make complete all as specified and directed.

S&F in repair toilet paper holder with flap of stainless steel complete all as specified and directed.Make:-JaquarCode no CAN 1153S or equivalent as per approved make complete all as specified and directed.

S&f in repair table top wall Hung Integrated Basin With Fixing Accessories, Size: 495x440x365 mm of approved quality including suitable bottletrap, brackets and cutting for and pinning in ends of brackets or errecting stand, including waste coupling complete all as specified and directed.

S & F One piece Vitreous china wash down water closet pan pedestal pattern (with flusing cistern) of Rimless Bowl for couples WC with UF soft close slim Seat cover, Hinges,conversion bend,Fixing accessories aand accessories set, Size 385x645x815 mm, white or coloured including making connections to trap, and to flush pipe (As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.Make: Jaquar code No ONS-WHT-10753NS250UFSM+WHT-10203 or equivalent of approved make

S&F in repair Single lever basin mixer with out popup waste & 450 mm long braided hoses for 15mm pipe, cast copper alloy chromium plated of Make -ORP-10011BPM of Jaquar or equivalent of approved make complete all as specified and directed.

S&F in repair towel rack with lower hanger CP 600 mm long complete all as specified and directed.Make:- Code No CAN-CHR-1181S of Jaquar aor equivalent of approved make complete all as specified and directed.

S&F in repair sheet glass shelf assembly (18x6 inches) consisting of chrominium plated bracket guard and railing for all length complete all as specified.

S&F in repair bathroom LED fitted looking mirror(size1.8x 0.600 m ) of premium quality "Saint Gobain " glass, of approved colour of LED (which doesn't poke into the eyes, but infuses a suitable glow from behind the mirror) complete all as specified and directed.(AS per Sample)

S&F Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing RCC/ PVC tank of any capacity complete all as specified & directed.

S&F 5.5 mm th desined toughed glass ( as per design approved) as in ventilator fixed with and including rubber gascut and beading incl hacking/removing of existing glass complete complete all as specified & directed.

M&L RCC type B1 1:2:4 (using 20mm graded aggregate) for shelves/slab supported on wall/beams, including necessary formwork and demolition of existing slab/shelves incl taking down of existing slab of any description complete all as specified and directed.

Taking out carefully modular switch/socket & cover plate including sunken box after disconnectiong electrical connection & keeping the same is safe custody for reuse complete all as specified and directed.

S&F in replacemnt GI modular sunken box of 6 module & refixing the modular cover plate and switch/sockets takendown under the above item including making electrical connections with cu wire 1.5 Sqmm FRLS PVC insulated drawn PVC conduit complete all as specified and as directed.

Supply, installation and testing & commissioning electric driven centrifugal pump set, multistage model No RKB65/19E, 3 stage pump, having cast iron casing, bronze impellers and CS shaft with gland paking arrangement coupled on common base plate, having discharge 15000 GPH, head of pump 100 mtr, RPM 2960 coupled with induction motor of capacity 60 HP/45 KW, common base plate fixed on PCC foundation in cement concrete (1:2:4) type B-1 including necessary frame work etc. and taking out old unsv motor, pump complete connection and deposited to MES AGE E/M-II Store yard by using suitable labour, T&P, transports etc complete all as specified by Engineer-in-charge. Note :- Cost of jointing material such as rubber gaskets, nuts, bolts & washers of required size are deemed to include in this rate.

M & L for Earthing complete with GI earth plate, electrode,600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) filled with common salt and charcoal and connected to GI earth strip 25x4 mm thick dia by means of GI nuts, bolts, & washers as shown in electrical plate No. 5 of SSR Part-I and Connected to earthing test point all as specified and including necessary PCC earth pit chamber of 1:3:6 and chamber cover of 50mm thick PCC 1:2:4 with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 40 mm dia upto 7.5 mtr from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed by Engr-in-charge including demolish existing earth pit taking out old materials.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, lamp holders, brackets, pendants, regulators, etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. Note:- The damaged surfaces to be made good with plastering (1:6). & applying colour wash in required coats to matching with existing surfaces as directed by Engineer-in-charge. Cost of the same deem to be included in quoted rates and nothing extra on this account admissible.

M&L Point wiring with 1.5 Sq. mm (nominal area) FRLSH PVC insulated and sheathed multistranded copper conductor cable 1100 Volts grade drawn through and incl PVC rigid concealed conduit (ISI Marked) suitable size with all accessories having thickness not less than 1.8mm incl sheet steel/ CI terminal box of adequate size having thickness not less than 1.6mm including 3mm thick hylem/masonite sheet including 1.5 Sqmm FRLSH PVC insulated sheathed copper conductor multistranded cable of green colour as earth conductor connected to common earth dolly complete all as specified and directed for one light point controlled by one switch 5 Amp, SP, one way, 240 Volts. Note: 1. Connections of cable with MCBs/Switch Sockets shall be done through proper size copper/brass thimbles. 2. Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit in not feasible. 3. Proper colour code will be used for wiring as per the electrical rule and as directed.

All as per Srl item No 150 here-in-before but for for one light point controlled by two switch 5 Amp, SP, two way, 240 Volts.

All as per Srl item No 150 here-in-before but for one 5 pin 5 Amp socket outlet point on same board controlled by one switch SP, one way 5 Amp, 240Volts.

All as per Srl item No 150 here-in-before but for one 5 pin 5 Amp socket outlet point on inependent board controlled by one switch SP, one way 5 Amp, 240Volts.

All as per Srl item No 150 here-in-before but using 2.5Sqmm (nominal area) multistranded copper conductor cable including 2.5 Sqmm size FRLS PVC insulated and sheathed copper conductor cable as earth conductor (green colour) connected to common earth dolly for one 6pin socket outlet 15 Amps multi purpose on independent point complete all as specified and directed.

S & F in replacement switch piano flush button single pole one way 5 Amp AC 240 volts, all as specified and as directed.

S & F in replacement Socket outlet 2 in 1, 3 pin, 5 Amps, flush type, AC 240 volts all as specified and as directed.

S & F in replacement Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type, AC 240 volts all as specified and as directed.

S & F in replacement switch piano flush type, single pole 15 amps, one way, AC 240 volts all as specified and as directed.

S & F in replacement bell push fulsh type 5Amps AC 240Volts all as specified and directed.

S & F in replacement bell Ding Dong AC 230 volts, single pole all as specified and directed.

S & F in replacement switch piano flush button single pole two way 5 Amp AC 240 volts, all as specified and as directed.

S & F in replacement for ceiling rose, PVC/Polycarbonate, insulated body, surface Bakelite 65mm dia three terminals all as specified and as directed.

S & F in replacement stepped type (0-5 step) electronic fan regulator not less than 100 W flush type.

S&F in replacement Lamp holder,fancy jumbo type, PVC/Polycarbonate type with back plate suitable for batten fittings including 15W LED Lamp complete all as specified.

M&L for sub Main Wiring with 2 run of single core, 6Sqmm FRLS PVC insulated and sheathed, multi stranded copper conductor cable using colour code for phase red and neutral black with and including 6 Sqmm FRLS PVC insulated and sheathed copper conductor cable in green colour as earth conductor connected to common earth dolly, drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm (ISI marked) with and including all accessories complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface including taking down of existing unserviceable surface/cocealed sub main wiring any type complete all as specified and directed. Note: Two run of submain wire (phase and neutral), and one run of earth including PVC conduit and accessories will be measured as one run.

S&F 20W surface / wall mounted box type batten LED luminaire, extruded aluminium housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI = 80 (Minimum), PF > 0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, CCT (K) > 6500, THD < 10% complete with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified.

S&F LED box type batten 10 Watt LED 2' length as mirror light prewired with all mounting accessories and connected electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor 3core cable of size 0.50Sqmm.

Taking down old ceiling fans and cleaning, greasing, servicing and carrying out minor repairs such as replacement of canopy set, clamps , fan blade screws, check nuts, down rod incl painting with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and refixing at same location and connecting up with 3 core flexible copper conductor of 0.50 sq mm complete all as specified and directed.

S & F in replacement SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar of rating not less than 100Amps, insulated neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete all as specified and directed

S&F in replacement MCB SP 240V, 50Hz of rating 6 to 32 Amp with breaking capacity of 10 kA having bi-connect terminals on the bottom terminals for looping and 35Sqmm termination capacity on both terminals with insulated sliding shutters and two position DIN rail clamp for easy mounting complete all as specified and directed.

All as per Ser item No 171 here in before but for MCB SPN 240V, 50Hz, 10 KA, of rating 32Amp.

M&L for distridution board iron clad vertical DB double door with IP-43 protection and mechanical strength as IK-09 suitable for MCCB as incomer an MCB as outgoing 415V 3Phase 50Hz 4 Way complete with appropriate size of copper bus bar and neutral link incl polyurethrene gasket complete with one MCCB 4Pole 415V 40Amps rating,16kA with fixed thermal and fixed magnetic release complete all as specified and directed. Note: (MCBs will be measured and paid saperately)

M & L for earthing complete with G .l earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 m below the normal ground level connected galvanized earth lead wire 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50mtr, including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia light grade GI pipe for watering, 15 mm dia medium grade Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 connected to DBs all as specified and indicated including testing on completion.

S&F LED street light with pressure die cast aluminium housing with polycarbonate/toughned glass cover, system efficacy > 100 lumen/W , minimum 3000 system lumens, system wattage<30W (including driver), color temperature 5700±300K, CRI>80, IP65 protection, IK07 rating. The potted electronic driver with THD<10%, PF>0.95. LED fitting is complete all as per OEM specified and directed. Manufacturer name should be embossed on light fitting. All type of testing for photometry, electrical and electronic parameters is to be done in NABL approved lab. The light fitting system must comply the IS standards incl mounting on GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable incl flexible pipe of suitable size complete all as specified and directed.

Taking down carefully serviceable single phase energy meters from meter box after carefully disconnecting the electrical connections and keeping aside, dismantling old burnt/unsv meter box, supply and fixing sheet moulded compound (SMC) fire retardant type meter box of size not less than 600x500x250mm to enclose 04 Nos single phase electric meters with hinged type front operated door having transparent acrylic sheet and proper locking arrangement, flush mounting in wall and refixing the serviceable electric meters and making electrical connections including cleaning of disturbed area and making good the disturbed surface and matching with existing specification complete all as directed.

Suplly and laying in trenches XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sq mm 3.5core. laid under ground, fixed along wall, through GI pipe under floor/Road including dismantling existing service cable of any size from electric pole to building, complete all as specified and directed.

All as per Srl item No 178 here in before but for size 16sqmm 4Core.

Excavation in any type of soil in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth (for cable, pole stay etc) and getting out complete all as directed.

Returning filling with earth obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as directed.

Removing surplus soil to a distance not exceeding 50mtr and depositing at a level not exceeding 1.5m above the starting point complete all as directed.

M & L for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable complete all as specified and directed.

M & L for well burned bricks , laind flat ( old size) sub class B designation 75 for cable protection copmplete all as specifed and directed.

M & L for tube , light grade galvanised of 40 mm bore with all fittings laid in trenches/through wall / under road/floor or pole by means of FI clamps, nuts bolts and washers complete all as specified and directed.

Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 33,488.40 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

M/S CANTILEVER ENGINEERS

M/S VIJ CONSTRUCTION CO

M/S DUGGAL CONSTRUCTION CO

AV ENTERPRISES