Elimination of manned LC No.MK-4, MK-5 & MK-11 by constructing RUB in MURIKSX section in Ranchi division.

Item- 1 Please see Item Breakup for details.

S No. Item Description of Item Unit Qty Rate Amount

RANCHI DIVISION-ENGG/SOUTH EASTERN RLY

1 031120 Casting and installation of single/twin cum 5075.00 5102.28 25894071.00

RCC box of all sizes with or without

common web section including design of

pushing scheme, thrust bed, casting of all

RCC components, with specified grade of

controlled concrete, pushing it in correct

position and alignment below Railway

track/Road following all measures of track

safety by 'Box pushing technique" as per

approved drawings/scheme, with or

without surcharge in all types of soils with

disposal of surplus earth away from vent

up to 1 Km, fixing arrangement for all

services & utilities including parapet walls

on both sides, wearing course, foot paths,

plaques, drainage arrangements etc. and

all other incidental works to complete the

ROB/RUB/Canal crossing in all respect as

per specifications to the satisfaction of

Engineer-in-Charge. N o t e : 1. The rate

includes all items of work/supplies for

complete job in all respects except "cost

of Reinforced cement concrete, cement,

reinforcement & shuttering" of (i) main

RCC Box; (ii) Thrust Bed; (iii) Footpath (iv)

Parapet wall and (v) wearing Course only,

which shall be paid extra under relevant

items of USSOR. 2. In case Drag Sheet

and/or Rail Cluster are to be used as per

approved scheme and design, the same

shall be paid extra under relevant item. 3.

The payment for this item shall be made

for the clear inner cross section area of

the parent RCC Box/Boxes and barrel

length i.e. clear inner volume of parent

Schedule Schedule D-Execution of all works as per NS Items (Special Items)

Item- 1 Please see Item Breakup for details.

S No. Item Description of Item Unit Qty Rate Amount

exploratory boreholes @ four Nos. at each

location in soil up to 10m below GL or

where "Refusal" is reached, whichever is

earlier b) Collecting disturbed and

undisturbed soil samples; c) conducting

standard penetration test at 3m depth

intervals at change of strata; d) Testing

the soil samples in laboratory and e)

Preparing three sets report including

recommendation for suitable safe bearing

capacity and submitting it in triplicate.

2 303 Providing hand packed dry flat brick Sqm 750.00 225.31 168982.50

flooring , class designation 7.5 (FPS

Bricks), excluding pointing with joints

filled with sand over a bed of dry sand of

average thickness 25 mm including

ramming sub grade , Flat brick

RANCHI DIVISION-ENGG/SOUTH EASTERN RLY

3 304 Providing, Fabricating & laying of colour Sqm 7000.00 2406.40 16844800.00

coated Galvalume (Proflex system

roofing) material for self supported

roofing system (Technology similar to

Proflex system provided by M&B

engineering Pvt.Ltd., Ahmedabad),

Material shall be of following

specification, BMT 0.90mm to 1.00mm,

APT 0.95mm Tolerance +/- 0.02mm thick,

width 605 mm or as decided by Railway

(Tolerance +/- 2mm), including supplying,

loading, transporting, unloading and

stacking at site, fabricating and laying

with all contractors tools, plants,

machineries materials and fixtures

labours including all lead and lift and

laps/ wastage if any etc. complete. The

colour of sheet will be decided by

Railway. The rate is also inclusive of

designing of roofing system, proof

checking and providing execution

drawing. Fabrication and installation of

self supported roofing technology similar

to Profles System provided by M&B

engineering Pvt.Ltd., Ahmedabad or

decided by engineer a) length as per site

requirement. b) Arch length as per site

equirement. Note :- The roofing system

should be self supported roofing system

i.e. without trusses, purlins or any

ancillary supports shall be designed by

the contractor through the consultant and

got duly proof checked from VJTI/IIT .

4 305 Supplying, fabricating and erecting valley Metre 1000.00 1642.89 1642890.00

gutter having 1.00 meter width, made out

of 0.91mm thick aluminum sheets, the

joints shall be made by aluminum welding

to make water tight including supplying

manufacturing and fixing brackets made

out of MS flats 50mm x 6mm at the

spacing of 75 cm center to center. The

rate will be including supply of all

materials, labours, tools,

plants,equipments, scaffolding and

staging etc. Complete work shall be

carried out as directed by engineer in

Item Breakup - A-Execution of all Works of CPWD DSR 2023-Ver-1 with all correction slips up to date.