ADDL/ALTN TO RAMP IN FRONT OF CHQ INSIDE VIJAY DURG UNDER GE (VD) KOLKATA

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed by Engr-in-Charge.

M & L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and cm thick, watered and rammed to a true surface of broken stones complete all as specified and directed.

M & L 40 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L brick work with Fly ash bricks' old size brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished rendering surfaces even and smooth (without using extra cement) complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1 mm thick wall care putty on new surfaces complete all as specified and directed

M & L for 20 mm thick screed bed or bedding layer of mortar as in backing coat of stone on fair face of brick wall or concrete surface in cement mortar 1:4 complete all as specified and directed.

M&L Makrana White Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete all as specified and directed.

M & L 18 to 20 mm thick machine cut one side Rough/ polished natural hard stone (Granite) any type/14 to 15 mm thick Full body vitrified stone finished tiles of selected size in Ramps, step, jambs, pillars,window cills, and simalr places etc like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite/ stone finished tiling/ Fixing of granite including complete edge moulding as directed by Engineer in Charge in different shades of tiles/granites as approved pattern complete all as specified and directed by Engr-In-Charge.