Formation of B.T Surface Road at Anna 1st street Ward no. 86

Amount

Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers, clearing and leveling the site with initial lead of 10M and lift of 2M etc. Comp. SI.No.62- rate for 10m3 MDU Build Data 2022-23 Pg - 20

Providing and laying spreading and compacting 0.396 m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface etc complete

Provding and Laying Prime coat of 7 Kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev V specifications

Providing and laying tack coat of 2.5 kgs/10 sqm over the prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charger for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm 0.25cum of 13-20 2.36mm and 0.23cum of 2.36mm & below and with 53.20 kgs of VG30/ VG 40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the in required temperture in central hot mix plant 20-30 ton capacity conveying the mix by tipper trucks to work site spreading the mix to uniform thickness 50mm with paver to the specified grades and cross section and compacted by vibratory / Pneumatic roller to the required density etc inclluding labour attaending to Paver to site etc. including hire charges for 20-30 CMP with bitument bitumen Boiler tipper truck, Paver finisher / 9m Paver finsiher vibratory / Pneumatic roller and all other tools and plant required including fuel and all other incidential charges etc complete as per Specification.

Providing laying Bituminous Concrete to 40mm thick using 0.13cum of 19.00-9.50mm 0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG 30/VG40bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, 10sqm including cost adn coveyance of all materials to CMP site heating the bitumen and aggregate to required temperature and mixing them in required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity conveying the mix by tipper trucks to paver site spreading the mix to uniform thickness 40mm with mechanic paver to the specified grades and cross section and consolidated by 8-10 ton vibratory / Pneumatic roller to the required density etc inclluding labour attaending to Paver to site etc. including hire charges for 20-30 CMP with bitument bitumen Boiler tipper truck, Paver finisher / 9m Paver finsiher vibratory / Pneumatic rooler and all other tools and plant required including fuel all other incidential charges etc complete as per Specification using CMP as Per clause 507 of MORTH Rev5

Road marking With hot applied thermoplastic compound With reflect rising class beadstd on bituminous surface provinding and laying of hot applied thermoplastic compound 205mm Thick including reflect rising glass beads @ 250 gms. Per sqm. Area, thickness of 2.5 mm. is exclusive of surface appled glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc. complete. (as per MORT & H specification No. 803).

Supply of Manhole Cover SFRC 60 x 60cm (Frame with Cover)

Raising the existing circular man hole in heavy type including the removing the existing the man hole cover with frame and dismantling the existing the cement concrete wall and tar road surface around the manholes using 1:2:4 20mm jelly for raising the existing the manhole wall and using CC 1:2:4 with 20mm chips for finishing the top surface of manhole etc., complete.

Manufacturing, supply & fixing of Retro-Reflective Road name sign board single arrow size 1.0x0.5m size made out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 67:2010& Type XI standards of ASTM D 4956-09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 65NB pipe vertical post firmly fixed to the ground by means of property designed foundation with M15 grade cement concrete 30cmx30cmx45c mets complete. The information message shall be made out of cut out letters in Blue color transparent overlay film as per IRC 67-201 Guidelines, 7 years pre qualification warranty for Retro Reflective sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro-Reflective type XI. The Retro - Reflective sheeting should have manufacturers WATERMARK on the sheeting surface for identification and the reflective sheeting should be orientation free. This should be compulsorily be demonstrable

Add GST 18%

K MURUGANANTHAM (BID ID -1225690)