AS AS TO WASHING AREA, MT POOL, BAR AND OUTDOOR AREA, PROVISION OF BICYCLE CUM SCOOTER STAND, PVC WATER TANK, WOODEN CABINETS, WOODEN RACKS AT VARIOUS LOCATIONS IN KALPAKKAM NAVAL STATION UNDER AGE(I) NAVY CHENNAI

Amount

Demolition of stone slabs laid bedded and pointed in any mortar and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed by Engr-in-Charge

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed by Engr-in-Charge

M&L PCC 1:4:8 Type D2 ( 40 mm graded aggregsate) as in foundation and mass concrete complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and directed by Engr-in-Charge

M&L removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed by Engr-in-Charge.

Excavation over areas not exc 1.5 m deep and getting out in soft / loose soil complete all as specified and as directed complete all as specified and directed by Engr-in-Charge

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge

M&L 100 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded aggregate ) footpath complete all as specified and directed by Engr-in-Charge

M&L sand filling 50mm thick under paver blocks for cushion complete all as specified and directed by Engr-in-Charge

M&L Machine pressed precast conctete interlocking (designer pattern) paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement pigment, complete all as specified and directed by Engr-in-Charge

M&L providing precast cement concrete 1:2:4 Type B1 ( 20 mm graded aggregate) set in cement mortar 1:6 in window or door cills, lintels, steps coping, kneelers, pier caps, columns, post etc. and setting in mortar complete with joints to match complete all as specified and directed by Engr-in-Charge

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge

M&L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement .

M&L PCC 1 : 2 : 4 Type B0 ( 12.5 mm graded aggregate) as in cill, steps, bed plates, copings, kerbs, etc. water troughs and the like includind weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge

M&L for glazed ceramic coloured tiles 300 x 450mm x7mm thick as in dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed plaster on fair faces of brick work/concrete in CM 1:3 to receive tiles as in dado complete all as specified and directed by Engr-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

S&F Vitrified ceramic tiles 10 mm thick light shade square/ rectangular) polished area of each tile not exceeding 0. 36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed by Engr-in-Charge

S&F Vitrified ceramic tiles 10 mm thick light shade (Square/ rectangular) polished area of each tile not exceeding 0. 36 sqm in skirtings set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10mm thick screed bed or bedding layer of cement mortar 1:3 complete all as specified and directed by Engr-in-Charge

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed by Engr-in-Charge

Demolition cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below & above ground level) complete all as specified and directed by Engr-in-Charge

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in Hard/Dense soil complete all as specified and directed by Engr-in-Charge

M&L for Plain Cement Concrete 1:2:4 type B2 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge

M&L for 40mm thick brick tiles laid on cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on cement mortar complete all as specified and directed by Engr-in-Charge

M&L excavation in post holes each n.exc 0.50 Cum and getting out in soft/loose soil including returning, filling in and ramming earth etc and removing surplus soil to a distance n exc 50 M and making good surface.

M&L Mild steel tubes medium weight rafer,etc fitted with angle cleats and other connecting plates using ERW or induction butt welded tubes conforming to IS : 1161-1979 grade St-240 including erection and fixing in position.

M&L two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description exceeding 10cm width or girth when unconnected with other painting complete all as specified and directed by Engr-in-Charge

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

S&F 2000 litres Rotational moulded polyethylene three layered (White Colour) water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge

M &L applying two coat of Cement base paint over a coat of primer alkali resistance on newly plastered or unplastered wall surface including preparation of surface, complete all as specified and directed by Engr-in-Charge

M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as in floor finshing concrete even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

S&F GI tubing medium grade 25mm bore with all fitting and fixing complete all wall, or laid in floor complete all as specified and directed by Engr-in-Charge

S&F GI tubing medium grade 40mm bore with all fitting and fixing complete all wall or laid in floor complete all as specified and directed by Engr-in-Charge

S&F of Gun metal 40 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed complete all as specified and directed by Engr-in-Charge

S&F of Gun metal 25 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed complete all as specified and directed by Engr-in-Charge

S&F of Gun metal 40 mm dia Non return Valve complete all as specified and directed by Engr-in-Charge

S&F Ball valves of diameter 25mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms/25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engr-in-Charge

S&F bib taps fancy type,chromium plated with crutch or butterfly handle screwed down and screwed for iron pipes of 15mm bore complete all as specified and directed by Engr-in-Charge

Cutting existing steel tubing of 40mm dia for alterations or additions(Each Cut measured) complete all as specified and directed by Engr-in-Charge

Screwing existing steel tubing of 40mm dia for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed by Engr-in-Charge

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 4 in half brick thick walls complete all as specified and directed by Engr-in-Charge

M&L 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth with out uing extra cement complete all as specified and directed by Engr-in-Charge

M&L preparing surface of newly plastered walls and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed by Engr-in-Charge

M&L for 35 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed by Engr-in-Charge

S&F Second class hard wood plain fillets square, rectangular or triangular in section, clean sawn, secured with screws, cross sectional area exc 13 and n.exc 25 Sqcm complete all as specified and directed by Engr-in-Charge

M&L Cup boards stuttters made with 19 mm thick prelaminated particle board with decorative lamination on one side and other side balancing white lamination medium density, exterior grade, including 6 mm teak wood lipping complete all as specified and directed by Engr-in-Charge

M&L preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge

S&F 25 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commericial type on both sides including 6mm teak lipping all around complete all as specified and directed by Engr-in-Charge

S&F for ball catches of 8mm dia steel brass body and striking plates approved pattern fixing to the cupboard shutters, including lettering complete all as specified and directed by Engr-in-Charge

S&F 100mm long aluminium handle cast type anodised complete all as specified and directed by Engr-in-Charge

Supply and fixing 75mm butt hinges, medium weight, cold rolled, mild steel, type C-21, complete all as specified and directed by Engr-in-Charge

S&F Brass Lock, drawer with 4 lever grade -I of size 50 mm complete all as specified and directed by Engr-in-Charge

S&F aluminium anodised barrel tower bolts of size 150 mm extruded section and fixed complete all as specified and directed by Engr-in-Charge

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precastconcrete articles complete all as specified and directed by Engr-in-Charge

M&L 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out uing extra cement complete all as specified and directed by Engr-in-Charge

M&L for preparing newly plastered surfaces and applying two coats of distemper oil emulsion over coat of primer on surfaces of walls including 3mm th wall care putty on walls complete all as specified and directed by Engr-in-Charge

M&L complete removal of existing treatment on walls and applying two coat of distemper oil emulsion over one coat of 3mm thick putty and primer complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as in screed bed over sub base complete all as specified and directed by Engr-in-Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over Screed bed or bedding layer of mortar 15mm of thick CM 1:4 for laying floor finishes complete all as specified and directed by Engr-in-Charge

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge

M&L for Machine cut kota stone slab 20-25mm thick fixed to wall in including polishing complete all as specified and as directed by Engineer In Charge

Taking up or down steel tubing 20mm dia bore and connection complete all as specified and directed by Engr-in-Charge

S&F GI tubing medium grade 20mm bore with all fitting and fixing complete all wall, or laid in floor complete all as specified and directed by Engr-in-Charge

S&F in repair bib taps concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore complete all as specified and directed by Engr-in-Charge

S&F of 40mm dia PVC pipes of Sink waste pipes fixed to walls including necessary bends/sockets and connecting to multiple floor trap complete all as specified and directed by Engr-in-Charge

S&F 75mm PVC (SWR) multiple floor trap with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors complete all as specified and directed by Engr-in-Charge

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors complete all as specified and directed by Engr-in-Charge

M&L for prefabricated Stainless Steel sink of size 1300 x 1300 x 200mm made out of 2mm thick stainless steel plate of SS304 and inclusive of outlet stainless steel pipes of size 75mm dia and making perforated holes at the mouth of outlet pipe complete all as specified and directed by Engr-in-Charge

S&F stainless steel pipe fixed to wall to receive Stainless steel sheet complete all as specified SS304 (Make : Jindal) complete all as specified and directed by Engr-in-Charge

S&F stainless steel sheet of 2mm thick fixed to SS tubescomplete all as specified SS304 (Make : Jindal) complete all as specified and directed by Engr-in-Charge

M&L for 18mm thick Ply wood grade BWP type BB fixed with screws to timber frame-work complete all as specified and directed by Engr-in-Charge

M&L for 1.50mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge

M&L for Wooden Knobs of size 50mm dia fixed to plywood complete all as specified and directed by Engr-in-Charge

M&L for 12mm thick tougned glass fixed to wooden frame complete all as specified and directed by Engr-in-Charge

M&L for 2nd class hardwood Bull nosed, splayed, chamfered or rounded on one edge or face beadings Not exc 75mm girth complete all as specified and directed by Engr-in-Charge

S&F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and directed by Engr-in-Charge

M&L for preparing newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed by Engr-in-Charge

S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge

M&L 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified and directed by Engr-in-Charge

S&F 125 mm butt hinges, medium weight, cold rolled mild steel fixed complete all as specified and directed by Engr-in-Charge

S&F 150mm size aluminium handle, cast type, anodised complete all as specified and directed by Engr-in-Charge

S&F 200 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge

S&F 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section complete all as specified and directed by Engr-in-Charge

S&F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and directed by Engr-in-Charge

M&L Providing PCC Type B1 1:2:4 (20mm graded aggregate) in as in hold fast fixing complete all as specified and directed by Engr-in-Charge

S&F powder coated anodised aluminum frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F powder coated anodized aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55Kg/m including necessary jointing cleats, glazing clips rubber packing, anodised aluminium snap beading screws anodized aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete all as specified and directed by Engr-in-Charge

Supply and fix aluminum anodized grill DG 916 of 10 mm dia rod square, rectangular, circular or similar type of shape, aperture not exceeding 7 cm in length or width fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No 8778), aluminium frame with grill shall be powder coated not less than 50 micron all as specified and as directed. Make: Grill No 20 of DECOGRIL or equivalent as approved by AGE(I) Navy Chennai .

S&F sheet glass ordinary quality 5.5mm thick, in squares n exc. 0.5 sqm each pane complete all as specified complete all as specified and directed by Engr-in-Charge

S&F Aluminium alloy wire cloth, 0.45 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and directed by Engr-in-Charge

M&L Precast RCC 1 : 2 : 4 Type B1 ( 20 MM graded aggregate) as in cover slab (for manholes etc), chajjas, mangers, shelves etc. set in cm 1 : 6 complete with joints to math complete all as specified and directed by Engr-in-Charge

M&L for Reinforced Cement Concrete Type A1 (1:1.5:3) (Using 20mm graded granite stone aggregate) in lintel beams, roof beams lintle beams and the like complete all as specified and directed complete all as specified and directed by Engr-in-Charge

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engr-in-Charge

S&F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia but in stirrups complete all as specified and directed by Engr-in-Charge

M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge

Taking down copper/aluminium point wiring (light,fan, socket or power) including fixture and fittings complete etc removing the materials for taking credit and making good the disturbed surface of wall/floor etc complete all as specified and directed by Engr-in-Charge

Taking down old sub main wiring with 2runs/4runs of 4/6/10/16 sqmm aluminium cables all as directed complete all as specified and directed by Engr-in-Charge

Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core FRLS drawn into and including non-metallic rigid PVC conduit of 20 mm dia,concealed FRLS wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof excluding Modular Metal flsh box and white cover plate with frame the switches, sockets, fan regulator etc as required suitable for Modular type fitting /fixture etc witch shall be measured and paid separately all as specified and directed for One light point controlled by one switch complete all as specified and directed by Engr-in-Charge

All as per Sl item No. 101 above abut for one 3 pin socket outlet 5 amps socket on independent board

All as per Sl item No. 101 above abut for One 3 pin socket outlet 5 amps socket on same board

All as per Sl item No. 101 above abut for One 3 pin socket outlet 15 amps socket on independent board with 4 sqmm PVC wire

S&F switch modular 5 amps one way flush type complete all as specified and directed by Engr-in-Charge

S&F only switch socket modular 5 amps flush type complete all as specified and directed by Engr-in-Charge

Supply & Fixing of modular type switch socket outlet 3 pin 15 Amps socket complete all as specified and directed by Engr-in-Charge

S&F ceiling rose 3 ways PVC / Polycarbonate, isolated body complete all as specified and as directed complete all as specified and directed by Engr-in-Charge

S&F of white cover plate with frame 3 module complete all as specified and directed by Engr-in-Charge

S&F of white cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge

S&F of Modular Metal flush box 3 Module complete all as specified and directed by Engr-in-Charge

S&F of Modular Metal flush box 4 Module complete all as specified and directed by Engr-in-Charge

S&F of MCB SP 230 volts 6- 32 Amps with 10KA breaking capacity complete all as specified and directed by Engr-in-Charge

S&F LED light fitting 4feet,1x20w,a trendy wall mounted battern,with extrunded aluminium housing,with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge. Make : C&S Electrical Cat Part No ;LTTB4F20WLED/W OR Equivalant to Crompton / Phillips

S&F Wall Fan 300mm 0r 12" 11Wid high velocity single phase 230 Volt complete all as specified and directed by Engr-in-Charge Make: Crompton /Bajaj or Equivalent as approved by AGE(I) Navy Chennai

S Dilli