Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹22.9 L+₹1.2 L (5.66%)Rejected-AOC | L2 | Rejected-AOC Other Than L1 | |
| 3 | L3₹22.9 L+₹1.2 L (5.67%)Rejected-AOC C 56 6 ANAND VIHAR COMMERCIAL COMPLEX MAHOLI ROAD MATHURA UP PIN 281004 | MATHURA | UTTAR PRADESH | 281004 | L3 | Rejected-AOC Other Than L1 | |
| 4 | L4₹23.0 L+₹1.3 L (5.92%)Rejected-AOC | L4 | Rejected-AOC Other Than L1 | |
| 5 | L5₹24.0 L+₹2.4 L (10.9%)Rejected-AOC | L5 | Rejected-AOC Other Than L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
17 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mathews M Shepherd, GE
GE (West) Mathura Mathura Cantt
SPECIAL REPAIR TO LOBBY PORTION OF TARAPORE HALL UNDER GE(WEST) MATHURA
2022_MES_567125_1
8300/1109/E8
Open Tender
Civil Works
Item Rate
90 days
Mathura Cantt
As per tender documents
9 documents required · 9 mandatory
₹500
GE (West) Mathura
₹50,000
Yes
14 Feb 2023
3 Dec 2022
19 Dec 2022
3 Dec 2022
17 Dec 2022
12 Dec 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.
M&L for Coloured Glazed ceramic tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick plaster in cement mortar (1:4) complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. complete all as specified and as directed.
M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and even complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished fair and even complete all as specified and directed.
M&L for rendering 5mm thick in CM (1:4) on fair finished faces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections/ceiling/facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note : Rate for form work if required shall be deemed included in the unit rate quoted by the contrator.
Demolition of Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L for brick work with sub class 'B' old size brick straight or curved on plan to any radius half brick thick wall built in CM (1:4) complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coats of texture paint as approved by GE over a coat of primer over two coats of 1mm thick each wall putty on wall etc complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of old surface of ceiling with POP and make design with POP moulding as required and approved by GE and applying two coat of distemper oil emulsion distemper over one coat of 1mm thick wall putty on ceiling etc complete all as specified and directed.
M&L for POP moulding for cornices of size 100mm width and 4-5mm thick complete all as specified and directed. Note: Design and pattern of POP moulding shall be approved by GE.
M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.
M&L for applying 10mm of single component, ready to use polymer modified repair mortar .Mortar having properties of good compressive strength and shrinkage resistance. It shall be pre-blended with special additives which provides it excellent workability and adhesion to host concrete/masonry surfaces. Repair mortar shall be applied with w/p ratio of 0.19 for 25 kg bag and shall have the properties Compressive Strength @ 30°C is 38 MPa at 28 day, Flexural Strength @ 30°C is 8 MPa, Tensile Strength @ 30°C is 2.5 MPa. complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coat of exterior emulsion APEX of Dark Shade on wall, over a coat of primer complete all as specified and directed.
S&F in replacement green PVC fibre sheet of 2mm thick fixed with coach screw and washer in roof/ wall complete all as specified and directed.
Dismantling mild steel work of any description and in any position complete all as specified and directed.
S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe-410 w (Gde E-250) quality-A complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of cement based paint over one coat of cement primer on walls complete all as specified and directed.
S&F solar control film 25 micron reflective type ( gareware sun control or equivalent ) sticked to glass panel as per instructions of manufacturers complete all as specified and directed.
S&F 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws to timber frame work complete all as specified and directed.
S&F hollow corrugated shape PVC wall lining consisting of 5mm thick decorative colour PVC sheet inclusive of solvent cement and fixing and incl beading at sides on PVC frame as per specifications all as specifed complete all as specified and directed.
Dismantling of wall and ceiling boards of any type and any thickness including cover fillets complete all as specified and directed.
S&F 605X605 mm size of grid GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the internediate channel with connecting clips across the intermediate channel at 457mm centre to centre including providing and fixing 4mm thick everest designer ceiling board at size 600x600mm non combustible material as per AS-1530 Part-3 of IS-14802 with fixing arrangment complete all as specified and directed.
S&F eco block gypsum board (50% acoustic & 50% plain) 12mm thick for acoustic purpose 600x600mm in size fixed with screw with GI snap grid in wall complete all as per manufacturer's instructions complete all as specified and directed.
Taking down chowkats or frames with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each including cutting holes for removal of hold fast complete all as specified and directed.
Taking down chowkats or frames with shutters without taking off shutters from the frames, area exc 1.5 sqm but n. exc 4.0 sqm each including cutting holes for removal of hold fast complete all as specified and directed.
S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium door shutters (fully glazed, comprising of shutters top rail 86.17x44.45x2.3 mm, bottom and lock rail 150x44.45x2.3mm and styles 53.7x 44.45x2.3mm and including jointing cleats, aluminium snap beading 20x15mm, rubber gasket, glazing clips and with aluminium hard ware fitting fixed with steel chromium plated screws such as 2 Nos D type handle, 2 Nos 100 mm long barrel tower bolts, one floor door stopper, one brass mortice 7 lever door lock etc complete complete all as specified and directed.
S&F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium window and ventilator shutters, side hung shutter type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, srew, anodised aluminium fitting such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 No) suitable handle (2 No) complete all as specified and directed.
S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrengment complete all as specified and directed.
S&F 150mm powder coated Anodised aluminium anodised barrel tower bolt of extrude section and fixed complete all as specified and directed.
M&L for 5.5mm thick sheet glass ordinary quality glass fixed in aluminum joinery and partitions etc exc. 0.5 sqm each pane complete all specified and as directed.
M&L for vitrified ceramic tiles (double charged) light shade 10mm thick (square/ rectangular) polished area of each tile exceeding 0.42 Sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.
All as per item No 35.00 (here-in-before) above but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate ) as in floor finishes and leveling course complete all as specified and directed.
M&L for preparation of old existing surface of walls by cleaning the surface of wall with help of hand held / long hand sander and applying two coats of oil bound distemper by using air less sprey technology with max working pressure of 3300 PSI and capable of operating single sprey gun with a maximum material hose length 30 mtr, the spray gun should be of reputed make as specifed by paint supplier and accessories for applying the emulsion should be able to spray in hard to reached areas and achieve the good wounding and penetration of paint on the surface to achieve exellent application using limited manpower over two coats of 1mm thick each wall care putty to acheive smooth finish to wall complete all as specified and directed.
Taking down surface / concealed copper / aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders,pendants,sockets, regulators,tubelight fittings etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and as directed.
M&L for point wiring with PVC insulated, unsheathed 1.5 sqmm FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC concealed conduit medium grade not less than 20 mm dia ISI marked ivory colour with and including all conduit fittings and fixing accessories including not less than 1.60mm thick sunken anodised pressed steel terminal boxes/modular boxes suitable for fixing of modular face plates, 3.0 mm thick hylam sheet cover/modular plate cover for mounting switches, sockets, fan regulators etc incuding 1.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for the following:- (a) one light point controlled by one switch
All as per item No 40.00 (here-in-before) but for one 3 pin socket outlet 5 Amps point controlled by one switch on independent board.
All as per item No 40.00 (here-in-before) but for one 3 pin socket outlet 5 Amps point controlled by one switch on the same board with other switches.
M&L for point wiring with 2.5 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.2mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 2.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed.
M&L for point wiring with 4.0 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 4.00 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed.
S&F Modular Socket 6A/16A - 2/3 pin combined 2 module for 15 Amp plug top multipurpose complete all as specified and directed.
S&F Modular Socket, 6A - 2/3 pin combined 2 module suitable for 10 Amp 230 Volt complete all as specified and directed.
S&F Modular switch 10 Amps, single pole, Modular type, one way, 240 volts(ISI Marked) 1 Module complete all as specified and directed.
S&F Modular switch 16 Amps, single pole, Modular type, one way, 240 volts(ISI Marked) 1 Module complete all as specified and directed.
S&F ceiling rose 65 x 50 mm three terminal, polycorbonate body complete all as specified and directed.
S&F Angle/ battan holder polycorbonate type body suitable for batten fitting complete all as specified and directed.
S&F bulk head LED light of 10 W, IP - 66, environmental friendly, ultra modern, energy saving, surface mounted complete all as specified and as directed.
S&F in replacement Modular Socket 6A/16A - 2/3 pin combined 2 module for 15 Amp plug top multipurpose complete all as specified and directed.
S&F in replacement Modular Socket, 6A - 2/3 pin combined 2 module suitable for 10 Amp 230 Volt complete all as specified and directed.
S&F in replacement Modular switch 10 Amps, single pole, Modular type, one way, 240 volts(ISI Marked) 1 Module complete all as specified and directed.
S&F in replacement Modular switch 16 Amps, single pole, Modular type, one way, 240 volts(ISI Marked) 1 Module complete all as specified and directed.
S&F surface and wall mounted 20 watt LED batten (Warm white with temprature 2700 K/3000K), PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.
S&F LED light 15W (warm white with temp 2700K/3000K) recess mounted pressure die cast aluminium luminaire in powder coated white finish drop down PC diffuser with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver and all other connected accessories complete all as directed.
S&F LED light 15W (warm white with temp 2700K/3000K) surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver and all other connected accessories complete all as directed.
S&F sturdy LED bollard light 10 W with excellent light output through its PMMA window ensuring maximum illumination aspect in surrounding in all accessories complete all as directed.
S&F Security Light LED 50W of new generation energy saving and environmental friendly longlife LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens empedded PC cover having TOP openining seperate driver compartment with IP-66 protection and impact resistance of IK07 with 10 KV Built surge Protection Devices and electronic driver including suitable pipe for light fiftings, bolts, brackets and necessrary paintingof connected accessories complete all as specified and as directed.
S&F 25W IP65 New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and directed.
S&F white cover plate with frame 18 Module complete all as specified and directed.
S&F metal flush box 18 Module fixed wall including chases wall for fixing box and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S&F white cover plate with frame 6 Module complete all as specified and directed.
S&F metal flush box 6 Module fixed wall including chases wall for fixing box and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S&F white cover plate with frame 4 Module complete all as specified and directed.
S&F metal flush box 4 Module fixed wall including chases wall for fixing box and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S&F white cover plate with frame 2 Module complete all as specified and directed.
S&F metal flush box 2 Module fixed wall including chases wall for fixing box and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S&F 4 step type heavy duty ISI Marked electronic fan regulator modular type complete all as specified and directed.
S&F LED luminaire 600x600mm, 36W (warm white with temperature 2700K/3000K), 220 Volts AC surfaces type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed.
M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked 20mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unsv submain wiring complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 20mm dia shall be measured and paid as one unit length.
M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked 20mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth conductor and one run of PVC conduit of 20mm dia shall be measured and paid as one unit length.
S&F MCB SP 240 volts, 6-32 Amps 10KA, 'B' series complete all as specified and directed.
S&F MCB SPN, 32 Amp 10KA suitable for 240 V, 50 Hz, 'B' series complete all as specified and directed.
S&F sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with not less than 200amp bus bar and neutral link, fixed flush in wall including chases wall for fixing DB complete all as specified and directed.
S&F sheet metal enclosure MCB distribution board single pole & neutral 240 volts 2 way single door complete fixed flush in wall including chases wall for fixing DB complete all as specified and directed.
S&F building security light of 30Watt energy saving & environmental friendly long life LED steet light made up of pressure die cast aluminium housing with high power LED as lighting source and lens empedded PC cover having IP65 protection and impact resistance of IK07 and electronic driver and all other fixing accessories complete all as specified and directed.
S&F sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of 20 A all as required at site or directed complete all as specified and directed.
Supply & laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with ''XLPE'' insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2.0 core size including taking down old unsv cable complete all as specified & directed. Note: Earth work and other connected work shall be measured & paid sperately.
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, walls, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed.
Removing excavated soil n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.
M&L for sand cushioning and covering clean and dry sand to underground electric cable with 8 cm before laying and 10 cm over the cable including ramming complete all as specified and directed. Note :- Punned thickness shall be measured and paid for.
M&L for sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.
Supply and laying galvanised iron pipe 50mm dia light grade including all fittings for protection of UG cable complete all as specified and directed.
M&L for Earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick , directly in the ground vertically to depth not less than 2.25 mtr below the ground level with top edge of earth plate surrounded by 15cm thick layer of chorcoal dust and common salt. connected to galvanised iron earthing wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel , GI pipe light grade 40mm bore for protection of earth lead and GI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C1, 80mm thick pre cast RCC (1:2:4) type B-1 cover reinforced with hard drawn steel wire fabric 50mm mesh size and 3.0 mm dia of wire each way, earth plate surrounded by alternate layres of packed chorcoal salt packed which shall be not less than 15 cm in all sides of earth plate all as shown in electricale Plate No-3 MES Sch Part-I, complete all as specified and directed.
mh enterprises
Ms Kamal Kant Agarwal
M/s Kanha Enterprise
JAGDISH PRASAD TOMAR
M/s Hoti Lal Contractor
shyam construction
R N AGRAWAL
M/s DEVI DAYAL CONSTRUCTION CO
Ahmed constructions
M/S A.K. ENGINEERS
M/s GLOBAL CONSTRUCTION
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .