Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹9.3 Laccepted-aoc | ₹9.3 L | accepted-aoc |
Tender Value
₹12.6 L
EMD Value
₹37,500
Closing Date
31 Aug 2026, 10:30 pmClosed
Rural Development and Panchayat Raj Department
RAVINDRANATH M R
Repair works to GHPS Mutuguppe in Mutuguppe G P Soraba Taluk. CAT- OTHERS
RDPR/2026-27/BD/WORK_INDENT28723
RDPR/2026-27/BD/WORK_INDENT28723
Open
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Sagara
₹500
₹37,500
31 Aug 2026
24 Aug 2026
31 Aug 2026
Repair works to GHPS Mutuguppe in Soraba Taluk. CAT- OTHERS
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils, as per drawing and tec...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing T-iron frames for doors, windows and venti
lators of mild steel Tee-sections, joints mitred and welded, including
fixing of necessary butt hinges and scre...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to st...
Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate sections and other sections of approved make ...
Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket
etc. complete as per the architectural drawings an...
Providing 20 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smoothrendering, providing and removing scaffolding, including cost of mat...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Providing and fixing Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., including cutting, hoisting,ixing in position and applying a priming coat of approved ...
Painting with black anti-corrosive bitumastic paint of approved brandand manufacture to give an even shade :Two coats on new work includingpreparing the surface after thorougly cleaning oil, grease, d...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1 BID DOCUMENT Below 20 lakh.docx
Tender Document • 0.07 MB
GENERAL CONDITION ENGLISH.docx
Tender Document • 0.02 MB
GENERAL CONDITION KANNADA.docx
Tender Document • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .