REPAIR/ MAIN /REPLACEMENT TO FLOORING, TILLING, JOINERY, PLUMBING, CGI SHEET, SANITARY FITTINGS, ROOFING STORAGETANK CLEANING, ROOF TREATMENT AND ALLIED WKS IN CERTAIN BLDGS AT RUPA, GACHHAM, BIRPUR AND DUKHAMPANI AREA OF AGE B/R -II UNDER GE 859 EWS

Amount

Dismantling plain or corrugated steel sheeting of any gauge, thickness as in roof coverings complete all as specified and directed.

Supply and fix 0.63 mm thick galvanised corrugated steel sheeting with two corrugation side lap fixed with L type or J type or cranked hooks, bolts with grade of zinc coating 275gm/sqm complete all as specified and directed. Make:- TATA/Jindal/Bhushan/Sail or equivalent.

Supply and fix plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.80 mm thickness (minimum 275gm/sqm galvanising) complete all as specified and directed. Make:- TATA/Jindal/Bhushan/Sail or equivalent.

fixing only old CGI sheet obtained from SI item No1 above with new L type or J type cranked hooks, bolts complete all as specified & directed.

Material and labour for applying two coats of synthetic enamel paint over newly steel (zinc or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any description over 10 cm width or girth over coat of red oxide primer complete all as specified and directed. Make:- Berger Luxol HI Gloss/Borolac (J&N) /Nerolac/Asian paints Apcolite/Superlac (Shalimar)/Dulux or equivalent.

Complete removal of existing treatment and applying two coats of cement based paint including preparation of old decorated wall surfaces complete all as specified and directed.

Complete removal of existing treatment and applying two coats of distemper oil emulsion including preparation of old decorated wall surfaces complete all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floorings, including finishing the surface even and smooth using extra cement complete all as specified and directed.

Supply and laying glass dividing strips, 3mm thick, 38mm width, Complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection/hard standing including finished surface finished even and smooth without using extra cement complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for 10mm thick rendering in CM 1:4 finish even and fair for laying ceramic tiles complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size (300x200mm) 6 x 7mm thick on vertical surfaces such as in skirting, dados set and jointed in neat cement slurry and pointed in coloured cement to match over complete all as specified and directed. Make :- Somany/Kajaria/Orient/Johnson/Nitco/Sunheart/Sunsine Tiles co pvt ltd or equivelent.

Material and labour for 15 mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified and directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. Make :- Somany/Kajaria/Orient/Johnson/Nitco/Sunheart/Sunsine Tiles co pvt ltd or equivelent.

Demolition of AC pipes 100/75mm dia complete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix PVC (SWR) pipes single socketed 75 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix 110 mm dia. PVC (SWR) bends any radius, with access door complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) junction single , (single T) equal or unequal with access door complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix 75 mm dia. PVC (SWR) bends any radius, with access door complete all as specified and directed. Make - Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix in repair PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. Make - Supreme/Kisan/Tirupati/Finolex/Prince.

Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

Material and labour for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even & smooth without using extra cement compleate all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar (1:4) on brick or concrete wall surfaces with water proofing compound 3% by varient of cement complete all as specified and directed. Note- Water proofing compound will be measured & paid sceintifically.

Material and labour for 10 mm thick rendering in cement mortar (1:4) on concrete surfaces of ceiling , finished even & smooth without using extra cement compleate all as specified and directed.

Material and labour applying for three coats of white wash on newly plastered surfaces of wall including preparation of surface complete all as specified and directed

Material and labour applying for two coat of cement based paint over a coat of alkali resistance primer on surfaces of walls on newly plastered surfaces complete all as specified and directed.

Material and labour applying for three coats of white wash on ceiling surfaces including preparation of surface complete all as specified and directed

Supply only integral water proofing compound. Make :- Waterseal/Pidilite/Cico/Bostic/Fosrock/J K Cement or equivalent ISI Marked

Taking shutters of any description exceeding 1 Sqm but not exc 2 Sqm complete all as specified and directed.

Taking down shutters of any description not exceeding 1 sqm complete all as specified and directed.

Resecuring or easing and adjusting, shutters of any description n exc 1 sq m each whithout taking down complete all as specified and directed.

Resecuring or easing and adjusting, shutters of any description exc 1 sqm but n exc 2 sq m each whithout taking down complete all as specified and directed.

Refixing the shutter in same opening exc 1sqm and not exc 2sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) not exc 1.50 Sqm complete all as specified and directed.

Taking down chowkats or frames (without taking off shutter from the frame) exc 1.50 Sqm including iron mongries but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed.

Supply and fix 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. (Species :TitaChampa/Bonsum/Hollok or equivelent).

Supply and fix Mild steel flat iron 30 x 6mm as in hold fasts,clamps,wall ties ,bands, straps supports or stays for rain water etc.conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for treating small articles such as hold fasts,ends of posts,,area n exc 0.1 sq.m each,complete all as specified. with tar or coal tar black paint incl preparation complete all as specified and directed.

Supply and fix 2nd class hard wood plain framed panelled shutters 30 mm thick (any number of panels) with panels of timber flat on both sides,( feather edged )or of veneered particle board medium density, wood particle board with commercial face veneer including fitted to chowkats complete all as specified and directed.

Supply and fixing 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc complete all as specified and directed.

Supply and fix for 30 mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Running wlding in repairs Thickness of metal to be welded exceeding 6mm but not exceeding 9mm.

Supply and fix 100 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed. Make :- Mowjee or equivalent ISI Marked fitting to be used.

Supply and fix 75 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed. Make :- Mowjee or equivalent ISI Marked fitting to be used.

Supply and fix Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix Aluminium anodised barrel tower bolts 125 mm long of extruded section and fixed complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix 150 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix aluminium alloy, anodised, sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fixing in repair hasp and staple 125 mm safety type, aluminium anodised fixed with screws complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix pre coated mild steel floor door stopper ,tongue n.exc 140mm length including vulcanised rubber piece complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips all as specified and directed.

Supply and fix 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane complete all as specified and directed. Make :- Saint Gobin/Modi float/Triveni float glass/hindustan pilkington or equivalent ISI Marked

Supply and fix 3 mm thick frosted glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane including oil putty and bedding complete fitting complete all as specified and directed. Make :- Saint Gobin/Modi float/Triveni float glass/hindustan pilkington or equivalent ISI Marked

Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks etc complete all as specified and directed.

Supply and fix in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks etc complete all as specified and directed.

Material and labour for preparing wood and wood based materials, steel and iron work of any description and treating ends of posts, backs of chowkats etc with tar or coal tar black paint area tarred exc 0.10 Sqm but n.exc 0.50 Sqm each.

Supply and Fix in repair Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe complete all as specified and directed.

Supply and Fix in repair Gun metal globe or gate valve with Iron wheel head, screwed both ends for 15 mm dia of pipe complete all as specified and directed.

Supply and fix in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make :- Jaquar/Essco/Orient

Supply and fix in repair 15mm bore Chromium plated fancy type pillar taps 15mm dia cast copper alloy with capstan heads, screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed. Make :- Jaquar/Essco/Orient

Supply and fix in repair bib cock brasss of 15 mm borecast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. Make :- Jaquar/Essco/Orient

Supply and fix in repair stop valve brass of 15mm dia borecast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified. Make :- Jaquar/Plumber/Kingston/Prima/Marc/Riviera /Jainko/ Jayanta or equivalent.

Supply and fix in repair vitreous china squatting pan 'Orissa pattern' size 580x440 mm white, with 'P' or 'S' trap front and back inlet with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding and making good to floor complete all as specified and directed. Make :- Parryware/Hindware/ Johnson /Jaquar.

Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white complete all as specified and directed. Make :- Parryware/Hindware/ Johnson /Jaquar.

Supply and Fix in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets etc complete all as specified and directed. Make :- Parryware/Hindware/ Johnson /Jaquar.

Supply and fix in repairs vitreous china wash hand basin white flat back of size 550mmx400 mm including 40 mm dia medium grade down take waste pipe chain and plug and CI brackets complete all as specified and directed. Make :- Parryware/Hindware/ Johnson /Jaquar.

Supply and fix 40mm LDPE (Low density polyethylene) Pipe of pressure rating 6 kgf /sq.cm complete all as specified and directed.

Supply and fix Waste coupling of PTMT (half or full threaded) .(Minimum weight 60 gms complete all as specified and directed.

Supply and fix PVC connection 15mm dia 450 mm long with brass check nuts and washers complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal to store all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store all as specified and directed.

Supply and fixing 15 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed. Make :- Jindal/TATA/Prakash Surya/Swastik/Appolo/BST/Kalinga/Goodluck or equivelent.

Supply and fixing 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed. Make :- Jindal/TATA or equivelent.

Fixing only 15 mm old steel tubing with all new fitting in new or old position(wall, ceiling, floors, etc) complete all as specified and directed.

Fixing only 20 mm old steel tubing with all new fitting in new orold position(wall, ceiling, floors, etc ) complete all as specified and directed.

Dismantling of water tanks exceeding 500 ltrs and not exceeding 1000 ltrs capacity complete all as specified and directed.

Supply and fix PVC water storage tanks of 500 ltrs rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. Make:- Sintex/Polycon

Supply and fix PVC water storage tanks of 1000 ltrs rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. Make:- Sintex/Polycon

S&F in repair 15 mm bore PVC bip tap standard of PTMT any colour screwed, for iron pipe and fixed. (Minimum weight 15 mm=90 gms/20 mm-125 gms) complete all as specified and directed. Make - Prayag or equivalent.

S & F Grating doon 125 mm dia with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed. Make - Prayag or equivalent.

S & F Grating doon 100 mm dia with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed. Make - Prayag & equivalent.

Demolition of precast block walling built in cement mortar compleate all as specified and directed.

Material and labour for pre cast cement concrete 1:3:6 type C1 (20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:4 complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar (1:6) on block masonry concreate surface complete all as specified and directed.

Material and labour for preparation of old surfaces of wooden or wood based material over 10 cm in width or girth of any description and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make:- Berger /Nerolac/Asian paints/Dulux

Material and labour for Preparing old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.

Material and labour for old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Supply and fixing continuous hinges (Piano) hinges,30mm brass,brighgt finish or electro galvanised complete all as specified and directed.

Material and labour for 20mm thick granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specifird and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B1 using 20 mm graded stone agg as in base for laying of floor tiles complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation/sewage line and getting out in hard/dense soil complete all as specified and directed.

Returning,filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick, in hard/dense soil complete all as specified and directed.

Removal of surplus soil of distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed..

Demolition and breaking up drain pipe (SGSW) set in cement mortar of 100mm bore complete all as specified and directed including PCC benching complete all as specified and as directed.

Supply and fix PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Material and labour for providing plain cement concerete (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 110 mm on after they are laid and tested complete all as specified and directed..

Disconnecting existing tanks Exc 250 & n exc 500 litres, setting aside cleaning and removing all scale and dirt, etc. From tanks and from mouths of circulating pipes, etc and reconnecting and refixig in position

Disconnecting existing tanks Exc 500 & n exc 1000 litres, setting aside cleaning and removing all scale and dirt, etc. From tanks and from mouths of circulating pipes, etc and reconnecting and refixig in position

Material and labour for taking down of existing tarfelt and bituminous materials of any description from roof or terrace, roughening surfaces of old concrete surface by picking up,sweeping clean and washing down with water to remove all loose dust etc, providing 15mm thick screed bed or bed or bedding layer of cement mortar (1:4) for laying waterproofing membrane and finishing surface even and smooth without using extra cement and providing waterproofing treatment over smooth finished surfaces after applying one coat of cold bituminous primer at 0.30 ltrs / Sqm ,hot bitumen 85/25 @ 1.2 kgs /Sqm providing & laying APP polymer, modified , non-woven polyster mat,reinforced membrane, 3mm thick (min) weighing 3.50 Kg/Sqm with surface finish of white mineral ,by torch application method , with minimum 75mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying one coat of bituminous based solar reflective aluminium paint @ 100Gms /Sqm over APP modified membrane all as specified and directed.(APP Make : STP /Texsa India Ltd)

M&L for dismantling of existing water closet after disconnecting the flush pipe, demolition of entire floor up to bottom of sunken portion, removing of debries, cleaning the top of RCC slab in sunken portion including pheripheral surfaces and plastered with 10mm thick cement & sand mortor (1:3) using WPC finished even and smooth w/o using extra cement cured properly and allowed to dry and applying two or more coats of epoxy resin/polymer modified cementatious coating like brush bond of Fosroc or equivalent both on floor and wall surfaces applied all as per manufactureres instructions and plastering the treated surfaces(after testing for water tightness) 15mm thick with CM 1:3 with WPC including providing 20mm dia GI spout with 300mm projection beyond outer face of wall complete all as specified and directed. Area of each WC/Toilet 0.90 x 1.80.

M&L for replacing locking arrangement of steel lockers of any size including, locking rod, handle and mortice lock make goodrej or equivalent including necessary welding of shutters as required for complete functionig of locker complete all as specified and directed.

Supply & Fix in repair for Aluminium anodised tubular towel rail complete all as specified and directed.

Supply & Fix 20mm in repair brass chromium plated brackets for complete all as specified and directed.

M/S N D ENTERPRISE

M/ S N T ENTERPRISES

M/S TSERING DHONDUP

M/S GOLANG CONSTRUCTION CO.

M/S L G BUILDERS

M/S KESANG CONSTRUCTION