ADDN/ALTN TO ORS MD ACCN AT DAKSHINESWAR UNDER GE (N) KOLKATA

Amount

Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.

Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 01 here in before by wire brush including scrapping & cleaning with emery paper or by air blasting or sand blasting incl foreign materials, loose concrete/aggregate etc and washing down with water as required complete all as specified and as directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for mild steel TMT deformed bar or twisted bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed.

M & L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed by Engr-in-charge. (Make :-SIKA/FOSROC or any other equivalent as approved by GE)

M&L for providing and applying of Epoxy Zinc rich primer on the steel surface by brush, the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 including cleaning and removing loose concrete from steel surface complete all as specified and directed by Engr-in-charge. (Make :-SIKA/FOSROC or any other equivalent as approved by GE)

M & L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-30 to the effected beam, column etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 30 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as spd and dir by Engr-in-charge. (Make :-SIKA/FOSROC or any other equivalent as approved by GE)

Supply, mixing and application two component structural grade polymer modified reinstatement mortar, where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as spd and directed by the Engr-in-charge upto 25 mm average thickness . (Make :-SIKA/FOSROC or any other equivalent as approved by GE)

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to sides of sides and soffits of beams, lintels, floors etc. for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works n.exc. 200mm thick etc for rough finished concrete surfaces complete all as specified and as directed

Use and waste of formwork to fins, facia, louvers. parapet, chajja etc for rough finished concrete surfaces complete all as specified and as directed

Material and labour for 10 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing liquid admixture for cement mortar.

Material and labour for rendering 05mm thick in cement mortar (1:3) on concrete surfaces in ceiling and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar suspended works in ground floors beams(reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Demolition of reinforced cement concrete of roofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended works (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Material and labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed

Demolition of cement concrete of any description including any treatment there to and in any position provided as in roof padding, roof curb etc complete all as specified and as directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of old debris/retrieved material to outside the premises or as directed by the Engineer-in-Charge.

Material and labour for providing plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after

Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment :- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified.

Supply only integral water proofing liquid admixture for concrete. .

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified & directed.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirting/dados etc over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

All as per item No. 35 above but in ceiling.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified & directed.

M&L for applying wall care putty 1.5mm thick and applying two coats of oil bound distemper over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed.

Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified & directed.

Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coats of oil bound distemper over a coat alkali resistant primer and finished the existing surface with 1.5mm thick wall putty etc complete all as specified and as directed.

Material and labour for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed.

All as per item No. 41 above but in ceiling.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and as directed.

All as per item No. 43 above but 20mm dia.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed.

All as per item No. 45 above but 20mm dia.

All as per item No. 45 above but fixing only. Note: Serviceable GI pipe obtained from item No. 43 above shall be reused after cleaning.

All as per item No. 46 above but fixing only. (Note : Serviceable GI pipe obtained from item No. 44 above shall be reused after cleaning).

Supply and fix in repair 15mm bore Bib tap (Minimum weight 90gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and as directed.

Supply and fix in repair15 mm angle stop valve standard of PTMT any colour,high pressure screwed for Iron pipes and fixed.( Minimum weight should be 90gm).

Supply and fix angular stop cock of 15mm bore fancy type, chromium plated , cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

Supply and fix Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Suply and fix stainless steel sink made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 495 X 420 mm with bowl size 410x330x160mm complete all as specified and as directed

Supply and fix in reapir vitreous China wash down water closet pan semi pedestal pattern(Anglo Indian type) , white including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.. complete all as specified and as directed

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix health faucet (ABS body) with 8mm dia 1 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar or equivalent.

Supply and fix chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar or equivalent.

Supply and fix vitreous China wash basin white flat back, size 550 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), 15mm bore CP pillar tap,chain and plug and porcelain stopper etc. complete all as specified and as directed.

Supply and fix in repair 75mm dia over head shower of PTMT (Minimum weight 40gms) any colour for fixing with 15mm pipe complete all as specified and as directed.

Supply and fix in repair Brass chromium plated Tubular Towel Rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified and as directed.

Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and as directed.

Dismantling cast iron pipes 100mm/75mm, jointed in cement mortar obtained either from trenches/wall as required complete all as specified and as directed.(Note : Excavation if required, shall be measured and paid separately)

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including excavation if rquired complete all as specified and as directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured)/Tee complete all as specified and as directed

Supply and fix 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fix 100mm bore cast iron cowls complete all as specified and as directed.

Supply and fix in repair 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed.

Supply and fix 75mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

Supply and fix UPVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip and including taking down existing rain water pipes complete all as specified and as directed.

Supply and fix UPVC bend/shoe/Tee 110mm dia all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

All as per item No. 75 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each.

Fixing only shutters of any description exceeding 1sqm but not exceeding 2 Sqm each with old serviceable builders hard ware articles / with new builders hard ware articles if any. (Note : (i) New builders hard ware articles shall be paid separately under “Supply only item. (ii) Old serviceable shutter obtained from item No 77 shall be reused).

Labour only for Resecuring or easing and adjusting without taking off shutters of any description exc 1 sqm but n exc 2sqm each complete all as specified and as directed.

Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Material and labour for treating ends of posts, backs of chowkats, etc., with tar or coal tar black paint area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, heavy weight, stainless steel and fixed complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Supply & fix 100 mm size butt hinges, light weight, cold rolled mild steel, complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed..

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix in repairs pre laminated particle board 18/19 mm thick, interior grade one side decorative choice lamination & other side balancing white lamination fixed in cup boards shelves with front side 6mm thick teak wood lipping/edging complete all as specified and as directed.

Supply and fix in repairs pre laminated particle board 18/19 mm thick, interior grade one side decorative choice lamination and other side balancing white lamination fixed in cup boards shutters with 6mm thick teak wood lipping/edging all round complete all as specified and as directed.

Supply and fix 100mm long hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate and fixed with brass screw complete all as specified and as directed.

Taking down old unerviceble steel window/ventilator of any description including gaurd bar ,peg stay and handle complete all as specified and as directed.

Supply and fix sliding powder coated anodised aluminium window shutters for gauged/ gauged, aluminium section weighing 0.55kg/m including necessary joining cleats, roller rubber neoprene packing/gusket,etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)

Supply and fix powder coated anodised aluminium glass louver /ventilators with blades of 10mm heavy duty with lever handle etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)

Supply and fix powder coated aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fix 4mm thick sheet glass ordinary quality, glazing with aluminium beads in square/rectangular exceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and as directed..

Supply and fix 4mm thick frosted glass ordinary quality, in square/rectangular not exceeding 0.5 Sqm in each pane fixed to wooden frame complete all as specified and as directed..

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamal paint on steel surface of any description over 10cm widht or girth incl preparation of old steel surfaces complete all as specified and directed.

Supply and fix in repair 25mm dia powder coated aluminium curtain rod fancy type( length from 0.90m to 1.5m)with fancy type end side brackets and fancy type hanging brackets complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Material and labour for one coat of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and as directed.

S&F rolled mild steel Fe-410 (Grade E-250A) in roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 Mpa (Galvalume base-PPGL trapezoidal profile sheets) fixed with aluminium self tapping screws of size 50/75mm and aluminium washer of suitable size in roof covering complete all as specified and as directed.

Cutting holes into or through in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete superfacial area exc 150sqcm but n exc 400sqcm as required all as specified and directed.

M&L 20mm thick Granite(of any type)work(table rubbed and polished) in steps, jambs,pillars,window -cills, cooking plateforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite ,complete all as specified and directed.

Material and labour for one coats of synthetic enamel paint to old steel surfaces of any description n.exc. 10cm width or girth including preparation of old steel surfaces complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material & labour for providing 40mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate as in floor, laid in bays, finish the surface even and smooth using extra cement complete all as specified and as directed

Supply and fixing Glass dividing strips of 3mm thick and 38mm wide as in floor etc all as specified and as directed

Supply and fix in repair Rotational moulded polyethylene water storage tanks (multi layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

M&L for 20mm dia, Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gms, complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside serviceable materials for reuse including making good of the disturbed surfaces, all as specified and directed.

M & L for concealed point wiring complete with 1.5 sq mm FRLS, PVC insulated multi stranded copper conductor single core cable 1100 volts grade,drawn into non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of PVC insulated 1.5 sq mm copper conductor cable for each continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches socket,outlet etc.,all as specified and directed by Engineer-in-Charge for one light / fan point controlled by one 1 way switch complete all as specified & directed. Note : Cost of cutting of wall, if any, for housing of pressed steel sunken terminal box and also making good the disturbed surfaces are deemed to be included in the unit rate.

All as per item No 123 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches.

All as per item No 123 above but for one 3/5 pin 6 Amps socket outlet on the independent board.

All as per item No 123 above but for one 3/5 pin 6 Amps socket outlet on the independent but below the switch board of light points in the same vertical planeboard.

All as per item No 123 above but for one call bell point controlled by one bell push.

All as per item No. 123 mention here in before but for one light point controlled by two Nos. two way switches.

All as per item No 123 here-in-before,for one 15 Amps socket outlet but using 2.5 sq mm,copper conductor with 1.5 sq mm,PVC insulated single core cable for earth continuity conductor.

Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin, 6 and 16 Amps, flush type complete all as specified and as directed.

Materials & labour for call bell Ding Dong, AC, 230 volt, single pole complete all as specified and as directed

Supply & fixing bell push, flush type, 6 Amps complete all as specified and as directed

Materials & labour for switch piano flush button 6 Amps single pole, 1 way complete all as specified and as directed.

Material and labour for switch socket combination 5 Pin, 6 Amps flush type complete all as specified and as directed

Materials and labour for switch flush type 5 amp, SP two way complete all as specified and as directed

Materials and labour for socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.

Materials and labour for lamp holder suitable for LED lamp insulated body with back plate for angle/batten fittings complete all as specified and as directed.

Materials and labour for ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed.

Materials and labour for electronic fan regulator (step rotary type), AC 240 volt (Code No 14502 of Anchor or equivalent of Plaza).

Supply & fixing MCB DB (Double door) SPN, 8 way sheet steel with bus bar, din rail, neutral link and earth bar including taking down old DB with fitting & fixtures all as specified and directed.

Supply and fix MCB single pole 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed.

Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting all as specified and directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100mm C/C both way and two Nos lifting handle made of 12mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete all as specified in electrical plate No 3 of SSR Part-I including taking down old earthing.

M & L for concealed sub main wiring complete with 2 runs of 4 sq mm,single core,PVC insulated,unsheathed cable,1100 volts grade,multi stranded with copper conductor drawn through and including PVC conduit pipe and accessories on surface wall/floors/concealed etc. with one run of PVC insulated 2.5 sq mm copper conductor for earth continuity conductor including taking down old US wiring all as specified and directed Note :- Two runs of cable, one run of conduit and one run of copper wire shall be measured as one unit length.

M & L for concealed sub main wiring complete with 2 runs of 6 sq mm,single core, PVC insulated, unsheathed cable, 1100 volts grade, multi stranded with copper conductor drawn through and including PVC conduit pipe and accessories on surface wall/floors/concealed etc. with one run of PVC insulated 4 sq mm copper conductor for earth continuity conductor including taking down old US wiring all as specified and directed Note :- Two runs of cable, one run of conduit and one run of copper wire shall be measured as one unit length.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Including taking down old unserceable light fitting complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete ncluding taking down old unserceable light fitting complete all as specified and as directed.

Supply and fix LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, including taking down the old unserviceable fitting complete all as specified and directed.

Material and labour for fixing of 4 way power TPN DB in double door including re-connection with existing earth wire to DB ncluding taking down old unserceable DB

Material and labour for MCCB 3/4 pole 100 amps capacity rupturing capacity 16 KA as incomer for power line verticle DB with fixed thermal and magnetic setting including re-connection of incoming cable with MCCB with thimble, ncluding taking down old unserceable

Excavating in trenches, n exc 1.5 m wide or n exc 10 sq m on plan and n exc 1.5 m in depth for foundation etc and getting out in loose soil for taking out pipe line complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed.

Removing excavated materials not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Supply and lay 40mm bore steel water tubing, galvanised 'medium grade’ GI pipe with all necessary fittings and fixed complete to walls and ceilings or laid in floors/surface/trench complete including taking down old unserviceable pipe all as specified and as directed

Supply and lay 32mm bore steel water tubing, galvanised 'medium grade’ GI pipe with all necessary fittings and fixed complete to walls and ceilings or laid in floors/surface/trench complete including taking down old unserviceable pipe all as specified and as directed

Supply and lay 20mm bore steel water tubing, galvanised 'medium grade’ GI pipe with all necessary fittings and fixed complete to walls and ceilings or laid in floors/surface/trench complete including taking down old unserviceable pipe all as specified and as directed

Supply and fix gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe and fixed after taking down old unserviceable one complete all as specified & directed for 20 mm bore.

Supply and fix gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe and fixed after taking down old unserviceable one complete all as specified & directed for 32 mm bore.

Supply and fix gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe and fixed after taking down old unserviceable one complete all as specified & directed for 40 mm bore.

BHARUKA ENTERPRISES

MS SHRI B.C. DAS

Shree Mahabir Builders