Construction of Compound Wall, Strom Water Drain and Infrastructure Facilities in Shopping Complexg Complex in ward no07

Amount

Earthwork excavating and depositing on bank with initial lead and lift of 10m and initial lift of 2m in sand, silt or other loose soil, wet sand or silt not under water, black cotton soil, sandy loam and ordinary soil including removal of excavated earth as per SS 20 A.

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Course Aggregate) Using 40mm ISS HBG metal including all cost conveyance of materials and labour charges including vibrating charges etc. complete as per standard specification.

Steel centering for Sofits of reinforced Cement Concrete Slabs or Plain Surfaces including strutting upto 3 mtrs. height using MS Sheets of Size 90 cm x 60 cm and HBG 10 gauge stiffened with welded silver oak joists of size 10 cm x 6.5 cm spaced at about 90 cm c/c and supported by casuarinas props of size 10cm to 13 cm dia spaced at 75 cm c/c complying with standard specification - for 10 m2

Steel centering for Sofits of reinforced Cement Concrete Slabs or Plain Surfaces including strutting upto 3 mtrs. height using MS Sheets of Size 90 cm x 60 cm and HBG 10 gauge stiffened with welded silver oak joists of size 10 cm x 6.5 cm spaced at about 90 cm c/c and supported by casuarinas props of size 10cm to 13 cm dia spaced at 75 cm c/c complying with standard specification - for 10 m2

Plain Cement Concrete 1:2:4 mix (One Cement, Two Fine Aggregate and Four Course Aggregate) Using 20mm ISS HBG metal including all cost conveyance of materials and labour charges including vibrating charges etc. complete as per standard specification.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification.

Brick Work in CM 1:5 mix using country bricks 8 ¾ " x 4 ¼ " x 2 ¾" including cost and conveyance of materials and labour charges etc., complete as per standard specification.

Plastering with cement mortar 1:5 (One cement and five sand), 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications

Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing other new surface and curing etc., complete.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting two coats over the new iron work with Ready Mixed Enamel Paint of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - IV No. 111,112,401,900

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supply and laying precast designer Paver Block confirming to IS 15658-2006 specification manufacturing and laying standard of M50 grade 83 mm thick (Table Clauses sand 9.14) suitable for bus terminals, Industrial Complexes Road on expensive soils tec.,) including the cost of paver block of size 225mm x 112.50mm x 100mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over sand bed of 150mm thick (Excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and paver block cutter and labour charges for vibrator and paver block cutter operators and labour for levelling the sand to the paver block etc., complete IS 15658-2006

Manufacturing, Supply and fixing of Stainless Streel Hand Rails

SMR TRADERS (BID ID -1344466)