Studio Apartment (G+4) and Principal-cum-Lecturar Residence (G+4) at Govt. Polytechnic, Purnea for the year 2025-26 (Re Tender)

BILL OF QUANTITY

Construction of Studio Apartment (G+4) and Principal-cum-Lecturar Residence (G+4) at Govt. Polytechnic, Purnea for the year 2025-26 (Re - Tender)

Estimated Cost : ₹ 128,925,666.00 Issued to Mr/Mrs/Smt:

Earnest Money: ₹ 2,289,300.00 Address:

Cost of B.O.Q ₹ 10,000.00 Reg. No.:

Date of Tender: M.R. No.& Date:

Time of Completion: Signature of Issuing officer:

S.No. SOR Discription Qty Unit Rate Amount

1 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed.

2.6.1 AH Kinds of soil 90.01 Cum 314.90 28,344.00

2 2.8 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 0.00

2.8.1 All kinds of soil 2311.84 Cum 360.70 833,881.00

3 2.13 Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5M including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating Each deposited layer by ramming, watering, etc.And disposing of surplus excavated soil as directed within a lead of 50 m Hard/dense soil. 0.00

2.13.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia 52.00 Metre 863.70 44,912.00

2.13.1.3 Pipes, cables etc exceeding 300 mm dia 27.00 Metre 1,279.30 34,541.00

2.13.1.2 + 2.14 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia + Extra for excavating trenches for pipes, cables, etc.in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m.(Rate is over corresponding basic item for depth upto 1.5 metre.) 52.00 Metre 972.10 50,549.00

2.13.1.3 + 2.14 Pipes, cables etc exceeding 300 mm dia + Extra for excavating trenches for pipes, cables, etc.in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m.(Rate is over corresponding basic item for depth upto 1.5 metre.) 27.00 Metre 1,387.70 37,468.00

4 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 1827.51 Cum 123.90 226,428.00

5 2.27 Extra for every additional lift of 1.5m or part thereof in: 0.00 0.00

2.27.1 All kinds of soil 473.02 Cum 49.40 23,367.00

6 2.28 Supplying and filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 567.19 Cum 287.30 162,954.00

7 2.33 Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. 2222.13 100 Sqm 357.20 7,937.00

8 2.37 Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termites' treatrnent(including the cost of chemical emulsion) 0.00 0.00

2.37.1 Along external wall where the apron is not provided using chemical imulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: 0.00 0.00

2.37.1.1 With chlorpyriphos/Lindone E.C. 20% with 1% concentration 68.28 Metre 39.90 2,724.00

2.37.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.55 litres per linear metre including drilling and plugging holes etc 0.00 0.00

2.37.2.1 With chlorpyriphos E.C. 20% with 1% concentration 68.28 Metre 49.10 3,353.00

2.37.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor. 0.00 0.00

2.37.3.1 With Chlorpyriphos EC 20% with 1% concentration 341.95 Sqm 241.20 82,478.00

Concrete Work 0.00

9 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 0.00 0.00

4.1.3 1:2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 303.06 Cum 3,998.10 1,211,664.00

4.1.5 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 0.00 Cum 3,434.00 0.00

4.1.8 1.4.8 (1 Cement :4 coarse sand :8 graded stone agregate 40 mm nominal size) 0.00 Cum 2,975.20 0.00

4.1.10 1:5:10(1 Cement :5 coarse sand:10 graded stone aggregate 40 mm nominal size) 20.00 Cum 2,731.50 54,630.00

10 4.12 Extra for providing and mixing water prooding material in cement concrete work in the proportion recommended by the manufacturers 291.67 Kg 57.16 16,672.00

11 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 51.21 Sqm 436.60 22,358.00

Reinforced Cement Concrete Works 0.00

12 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 0.00

5.1.1 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size) 4.92 Cum 5,961.90 29,333.00

5.1.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 4.07 Cum 4,688.30 19,081.00

5.1.3 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) 4.88 Cum 4,232.40 20,654.00

13 5.9 Centring and shuttering including strutting, propping etc. and removal of form for: 0.00

(i) 5.9.1 Foundations, footings, bases of columns, etc., for mass concrete. 420.98 Sqm 211.60 89,079.00

(ii) 5.9.2 Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. 430.76 Sqm 375.10 161,578.00

(iii) 5.9.3 Suspended floors, roofs, landings, balconies and access platform 2766.60 Sqm 437.50 1,210,388.00

(iv) 5.9.4 Shelves (Cost in situ) 75.10 Sqm 437.50 32,856.00

(v) 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 3551.99 Sqm 404.70 1,437,490.00

(vi) 5.9.6 Columns, Pillars, Piers, Abutments, Post and struts 3284.24 Sqm 494.40 1,623,728.00

(vii) 5.9.7 Stairs, (excluding landings) except spiral staircases. 370.38 Sqm 439.90 162,930.00

(viii) 5.9.16.1 Edges of slabs and breaks in floors and walls : 0.00

Under 20 cm wide 1042.54 Metre 130.20 135,739.00

(ix) 5.9.19 Wheather shade, Chajja, corbels etc., including edges. 160.80 Sqm 550.90 88,585.00

14 5.11 Extra for additional height in centring, shuttering wherever required with adequate bracing, propping etc. including cost of de-shutering and de centring at all levels over a height of 3.5 m ,for every additional height of 1 metre or part thereof (Plan area to be measured) 0.00

5.11.1 Suspended floors, roots, laning, beams and balconies (Plan area to be measured) 68.14 Sqm 174.00 11,856.00

15 5.22 Reinforcement for RCC work including straightening. Cutting, bending, placing in position and binding all complete. 0.00 0.00

Thermo-Mechanically Treated bars 0.00 0.00

16 5.33 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength andadmixtures in recommended proportions as per IS: 9103 to accelerate,reinforcement,durability as per direction of Engineer-incharge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. 0.00 0.00

(i) 5.33.1 All work upto plinth level 0.00

5.33.1.1 Concrete of M-25 grade with minimum cement content of 330 kg/cum 768.40 Cum 5,063.40 3,890,717.00

(ii) 5.33.2 All work from plinth level upto floor V level. 0.00

5.33.2.1 Concrete of M-25 grade with minimum cement content of 330 kg/cum 1140.45 Cum 5,863.20 6,686,686.00

Brick Work 0.00

17 6.1C Brick work with bricks with fly ash bricks as per IS 12894(2002) & 3495 in foundation and plinth in : 0.00

(i) 6.1.14C cement mortar 1:6 (1 cement : 6 coarse sand) 654.08 Cum 4,923.00 3,220,036.00

(ii) 6.1.12C cement mortar 1:4 (1 cement : 4 coarse sand) 512.14 Cum 5,116.30 2,620,262.00

(iii) 6.3C Extra for Brick work in superstructure above plinth level upto floor V level 969.09 Cum 842.20 816,168.00

(iv) 6.4C Extra for brick work in superstructure above floor V level for each four floors or part thereof 39.93 Cum 638.20 25,483.00

18 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 160.78 Metre 1087.90 174,913.00

Granite work 0.00

19 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high loss finish etc. complete at all levels. 0.00

Granite of any colour and shade 0.00 0.00

8.3 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 0.00 0.00

(ii) 8.3.2 Granite work 399.89 Metre 260.10 104,011.00

20 8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/ sqm including pointing in white cement complete 0.00

8.9.1.2 Granite of any colour and shade 27.79 Sqm 2,112.20 58,698.00

Aluminium Work 0.00

21 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 157.24 Sqm 1,775.30 279,148.00

22 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured) 157.24 Sqm 401.40 63,116.00

23 9.48 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. 0.00 0.00

9.48.1 Fixed to steel windows by welding 2191.06 Kg 144.50 316,608.00

9.48.2 fixed to steel windows by welding 5700.74 Kg 161.10 918,389.00

24 9.50 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. 120.89 Sqm 1,291.30 156,105.00

25 9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete 48.00 Each 639.40 30,691.00

26 9.96 Providing and fixing aluminium sliding door bolt anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with nuts and screws etc. 0.00

27 9.97 Providing and fixing aluminium sliding tower bolt anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with nuts and screws etc. 0.00 0.00

28 9.98 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete 82.00 Each 78.40 6,429.00

29 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 0.00 0.00

30 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 0.00 0.00

9.101.2 Twin rubber stopper 238.00 Each 60.80 14,470.00

31 9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). 13.80 Metre 1,462.70 20,185.00

32 9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/ m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-incharge (panneling to be paid for separately). 5.04 Sqm 6,445.00 32,483.00

33 9.138 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc.,with G.I. beading of appropriate size, made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc., complete all as per direction of Engineer-in-charge 0.00 0.00

9.138.1 With clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire resistance 5.04 Sqm 31,796.30 160,253.00

34 9.147D Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 0.00 0.00

9.147D.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm) 109.55 Sqm 9,471.00 1,037,548.00

35 9.166.1 Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). 18 mm thick 4184.81 Cum 1085.80 4,543,867.00

36 9.167.1 Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. 762.58 Cum 778.40 593,592.00

36 9.171 Providing and fixing stainless steel soft closing spring hinges at O degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws ncluding making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. 1176.00 Each 220.40 259,190.00

37 9.172 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in- charge 672.00 Each 749.70 503,798.00

37 9.173 Providing and fixing readymade 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings all complete 560.00 Kg 371.80 208,208.00

38 9.170.1 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge.200mm 560.00 Each 150.20 84,112.00

Steel Work 0.00 0.00

39 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 12.00 Sqm 6,303.40 75,641.00

40 10.5 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer. 0.00 0.00

10.5.1 Using M.S. angle 40x40x6 mm for diagonal braces 8.22 Sqm 3,653.00 30,028.00

41 10.15 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by . mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 0.00 0.00

10.15.2 Profile C 0.00

10.15.2.1 Fixing with adjustable lugs with split end tail to each jamb 423.14 Sqm 432.60 183,050.00

42 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 129.00 Each 165.40 21,337.00

43 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 5491.90 Kg 546.80 3,002,971.00

44 10.32.2 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required. 1356.06 Kg 114.60 155,404.00

Flooring Works 0.00 0.00

45 11.20 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) 0.00

11.20.4 Ordinary cement without any pigments 15.07 Sqm 802.70 12,097.00

46 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand) 0.00

47 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 108.35 Sqm 1,334.90 144,636.00

48 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab 207.75 Metre 82.90 17,222.00

49 11.32 Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length 90.38 Sqm 18.10 1,636.00

50 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Motar 1:3 (1cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 1520.66 Sqm 795.00 1,208,925.00

51 11.38 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete 242.05 Sqm 862.00 208,647.00

52 11.40 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours except white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. 153.16 Sqm 1,414.00 216,568.00

53 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. 0.00 0.00

54 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 0.00 0.00

55 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. 1762.81 Sqm 283.30 499,404.00

56 11.76 Providing average 150mm thick dry rammed khoa beaten to 112mm (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar (1: 10) all complete as per building specification and direction of E/l, 27.74 Sqm 388.30 10,771.00

57 11.79 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge 0.00 0.00

11.79.2 (b) 80 mm thick c.c. paver block of M-35 grade with white colour design and pattern 416.00 Sqm 906.10 376,938.00

58 12.39 Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1cement:3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. 45.00 Each 189.40 8,523.00

59 12.55X Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 238.85 Sqm 1101.60 263,117.00

60 12.56X Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/ cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge 238.85 Sqm 1349.90 322,424.00

Plaster & Finishing Works 0.00 0.00

61 13.11 Cement plaster in course sand, 12 mm cement plaster of mix 0.00 0.00

62 13.12 15 mm cement plaster on rough side of single or half brick wall of mix. 0.00 0.00

63 13.24 6 mm cement plaster to ceiling of mix. 0.00 0.00

64 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 305.10 Sqm 203.60 62,118.00

65 13.26 Neat cement punning 50.80 Sqm 40.50 2,057.00

66 13.37 Extra for plastering exterior walls of height more than 10m form ground level for every additional height of 3 m or part there of 1319.27 Sqm 44.40 58,576.00

67 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade 0.00 0.00

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 3273.63 Sqm 137.00 448,487.00

68 13.77 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade 0.00 0.00

(i) 13.77.2 New work (two or more coats ) over and including priming coat with cement primer 5132.67 Sqm 102.30 525,072.00

(ii) 13.77A Distempering with 1st quality washable distemper (ready made ) of approved manufacturer and of required shade and colour complete. As per manufacture's specifications 0.00 0.00

13.77A.1 Two or more coats on new work 6672.79 Sqm 56.60 377,680.00

69 13.78 Applying one coat of distemper primer of approved brand and manufacture on wall surface: 0.00 0.00

13.78.1 Cement primer 1747.80 Sqm 38.60 67,465.00

13.78.2 Distemper Primer 6672.79 Sqm 38.70 258,237.00

70 13.79 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. 0.00 0.00

13.79.1 New work (three or more coats) 1747.80 Sqm 81.20 141,921.00

71 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 15079.10 Sqm 105.40 1,589,337.00

72 13.81 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on 0.00 0.00

13.81.1 wood work (hard and softwood) 353.78 Sqm 39.70 14,045.00

13.81.3 steel galvanized iron/steel works 494.87 Sqm 34.60 17,123.00

73 13.82 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: 0.00 0.00

13.82.1 New steel work (two or more coats) 579.91 Sqm 83.50 48,422.00

74 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work 700.77 Sqm 84.50 59,215.00

75 13.116 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 1023.74 Metre 47.10 48,218.00

76 18.33.1 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 100A 16.00 Each 7210.60 115,370.00

77 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) 0.00

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 0.00

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 4294.52 Kg 418.40 1,796,827.00

79 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 1238.23 Metre 85.20 105,497.00

80 21.4 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 0.00 0.00

21.4.1 Pre-laminated particle board with decorative lamination on both sides 17.00 Each 2,283.80 38,825.00

81 21.13 Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 17.00 Each 365.20 6,208.00

82 21.16 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer in-charge 0.00 0.00

21.16.2 Powder coated minimum thickness 50 micron aluminium 34.00 Each 86.60 2,944.00

Water Proofing Treatment Works 0.00

83 22.2 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : 0.00 0.00

22.2.1 1 Using rough kota stone 507.09 Sqm 1752.40 888,625.00

84 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) 3rd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) 4th course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). 279.26 Sqm 480.60 134,212.00

85 22.8 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge 0.00 0.00

22.8.1 With average thickness of 120 mm and minimum thickness at khurras point to be 65 238.85 Sqm 850.70 203,190.00

86 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not les+C187s than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. 0.00 0.00

87 22.21 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100%polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation 238.85 Sqm 85.20 20,350.00

Miscellaneous Works 0.00

88 Carriage of Materials 0.00 0.00

(i) Bricks (lead - 1 km kutcha + 7 km pucca) 643739.51 Per 1000 1,161.47 747,684.00

(ii) Coarse Sand 1767.97 Cum 2,990.78 5,287,609.00

(iii) Stone Chips 2099.75 Cum 2,320.21 4,871,861.00

(iv) Local sand ( Lead - 1 km kutcha + 2 km pucca) 1175.36 Cum 316.15 371,590.00

89 Difference in Cost of Materials 0.00 0.00

Water Supply & Sanitation 0.00 0.00

90 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0.00

91 12.8 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4coarse sand and making good the wall etc complete 0.00

92 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for therma expansion.(SW) 0.00 0.00

12.79.2.1 Single pushfit coupler 0.00

12.79.3 Single tee with door 0.00

12.79.3 Single tee without door 0.00 0.00

12.79.6 Shoe plain 0.00

93 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. 203.01 Cum 4,649.00 943,793.00

94 17.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : 0.00 0.00

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 34.00 Each 4,470.90 152,011.00

95 17.81 roviding and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including ntegrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 17.00 Each 14,663.50 249,280.00

96 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require 0.00 0.00

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 16.00 Each 2,764.40 44,230.00

17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 17.00 Each 2,369.90 40,288.00

97 17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 33.00 Each 1,500.00 49,500.00

98 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required 0.00 0.00

17.10.1 Kitchen sink with drain board 0.00

17.10.1.1 kitchen sink with drain board of size 510x1040mm bowl depth 250 mm. 33.00 Each 5,231.50 172,640.00

99 17.22 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 33.00 Each 131.60 4,343.00

100 17.28 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. 0.00 0.00

17.28.2 Flexible pipe 0.00 0.00

101 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete: 17.00 Each 1,068.50 18,165.00

102 17.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing 0.00 0.00

17.32.4 Rectangular shape 1500x450 mm 16.00 Each 1,515.20 24,243.00

103 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P Brass brackets and guard rails complete fixed with 40mm long screws, rawl plugs etc.complete. 41.00 Each 713.30 29,245.00

104 17.34 Providing and fixing toilet paper holder : 0.00 0.00

105 17.35 Providing and fixing vent pipes : 0.00 0.00

17.35.1.1 100 mm dia Sand cast iron S&S pipe as per IS : 1729 205.00 Metre 1,036.50 212,483.00

106 17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),including cost of cutting holes and making good the walls etc. : 0.00 0.00

107 17.39 Providing and fixing plain bend of required degree 0.00 0.00

17.39.1.2 Sand cast iron S&S as per IS - 3989 16.00 Each 439.70 7,035.00

108 17.43 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts & nuts complete. 0.00 0.00

17.43.1.2 Sand cast iron S&S as per IS - 3989 16.00 Each 731.40 11,702.00

109 17.44 Providing and fixing single equal plain junction of required degree : 0.00 0.00

17.44.1.1 Sand cast iron S&S as per IS - 3989 16.00 Each 580.20 9,283.00

110 17.49 Providing and fixing double equal plain inverted branch of required degree. 0.00 0.00

17.49.1.2 Sand cast iron S&S as per IS 3989 16.00 Each 760.80 12,173.00

111 17.56 Providing and fixing terminal guard 0.00 0.00

17.56.1.2 Sand cast iron S&S as per IS - 3989 10.00 Each 439.70 4,397.00

112 17.57 Providing and fixing collar 0.00 0.00

17.57.1.2 Sand cast iron S&S as per IS - 3989 8.00 Each 439.70 3,518.00

113 17.58 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter 0.00 0.00

114 17.59 Providing and fixing M.S stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diametre. 0.00 0.00

115 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 0.00 0.00

17.60.1 100mm inlet and 100mm outlet 0.00 0.00

17.60.1.1 Sand cast iron S&S as per IS: 3989 36.00 Each 1,129.20 40,651.00

116 17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 0.00 0.00

17.65.1 100 mm diameter pipe 335.00 Each 46.10 15,444.00

117 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink. 0.00

17.70.1 Bottle t rap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 16.00 Each 325.10 5,202.00

17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms 16.00 Each 325.10 5,202.00

118 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangem ent of approved quality and colour. 0.00

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 33.00 Each 424.00 13,992.00

119 17.72 roviding and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms. 17.00 Each 204.70 3,480.00

120 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 51.00 Each 146.30 7,461.00

121 18.22 Providing and fixing C.P. brass shower rose with 15 o r 20 m m in let : 0.00 0.00

Internal Water Supply 0.00 0.00

122 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as pproved by Engineer in charge. 66.00 Each 6,119.20 403,867.00

123 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. 0.00

Concealed work including cutting chases and making good the walls etc. 0.00 0.00

18.8.1 15mm nominal outer dia pipes 1425.00 Metre 278.20 396,435.00

18.8.2 20mm nominal outer dia pipes 1115.00 Metre 350.80 391,142.00

18.8.3 25mm nominal outer dia pipes 675.00 Metre 463.10 312,593.00

18.8.4 32mm nominal outer dia pipes 325.00 Metre 549.80 178,685.00

40mm nominal outer dia pipes 95.00 Metre 480.00 45,600.00

124 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0.00 0.00

Internal work - Exposed on wall 0.00 0.00

18.7.3 25mm nominal outer dia pipes 400.00 Metre 317.30 126,920.00

18.7.4 32mm nominal outer dia pipes 350.00 Metre 395.20 138,320.00

18.7.5 40mm nominal outer dia pipes 200.00 Metre 538.40 107,680.00

125 18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 0.00 0.00

18.11.1 15 mm dia nominal bore 65.00 Metre 318.90 20,729.00

18.11.2 20 mm dia nominal bore 75.00 Metre 374.00 28,050.00

126 18.13 Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. 0.00 0.00

18.13.1 25 to 40mm nominal bore 16.00 Metre 446.70 7,147.00

18.13.2 50 to 80mm nominal bore 16.00 Metre 1,090.40 17,446.00

127 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc . (external work) 0.00 0.00

18.12.1 15 mm dia nominal bore 450.00 Metre 197.60 88,920.00

18.12.2 20mm dia nominal bore 485.00 Metre 245.40 119,019.00

18.12.3 25mm dia nominal bore 275.00 Metre 342.00 94,050.00

18.12.4 32mm dia nominal bore 205.00 Metre 381.70 78,249.00

18.12.5 40 mm dia nominal bore 185.00 Metre 476.80 88,208.00

18.12.6 50mm dia nominal bore 115.00 Metre 572.60 65,849.00

18.12.7 65mm dia nominal bore 20.00 Metre 667.70 13,354.00

18.12.8 80mm dia nominal bore 25.00 Metre 818.20 20,455.00

128 18.16 Providing and fixing brass stop cock of approved quality : 0.00 0.00

18.16.1 15 mm nominal bore 60.00 Each 303.80 18,228.00

18.16.2 20 mm nominal bore 40.00 Each 328.00 13,120.00

129 18.17 Providing & fixing gun metal gate valve with C.I. wheel of approved quality, (screwed end) : 0.00 0.00

18.17.1 25 mm nominal bore 88.00 Each 532.30 46,842.00

18.17.2 32 mm nominal bore 61.00 Each 589.90 35,984.00

18.17.3 40 mm nominal bore 18.00 Each 707.30 12,731.00

18.17.4 50 mm nominal bore 4.00 Each 878.20 3,513.00

18.17.5 65 mm nominal bore 4.00 Each 1,490.70 5,963.00

18.17.6 80mm nominal bore 4.00 Each 2,227.60 8,910.00

130 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end). 0.00 0.00

18.19.2 32 mm nominal bore 0.00 0.00

131 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions: 0.00

18.21.2.1 15 mm nominal bore 96.00 Each 85.20 8,179.00

132 18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 0.00

133 18.28 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 0.00

18.28.3 150 mm diameter pipe 16.00 Each 337.40 5,398.00

134 18.40 Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality : 0.00

18.40.7 65mm dia Pipe 20.00 Metre 19.40 388.00

18.40.8 80mm dia Pipe 25.00 Metre 22.50 563.00

135 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 70000.00 Litre 9.70 679,000.00

136 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS :8931 166.00 Each 434.20 72,077.00

137 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 0.00

18.50.1 15 mm nominal bore 33.00 Each 715.10 23,598.00

138 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 0.00

18.52.1 15 mm nominal bore 48.00 Each 594.80 28,550.00

139 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS :8931 0.00

18.53.1 15 mm nominal bore 166.00 Each 500.40 83,066.00

140 18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 260.00 Each 61.70 16,042.00

141 18.65 roviding and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms. 55.00 Each 96.80 5,324.00

142 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same: 55.00 Each 198.50 10,918.00

143 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 65.00 Each 217.10 14,112.00

144 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge. 150mm 90.00 Metre 660.10 59,409.00

145 18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work incement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 0.00

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 100A 10.00 Each 1,177.90 11,779.00

146 18.33 constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 0.00 0.00

147 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 0.00 0.00

19.1.1 100 mm diameter 12.00 Metre 280.60 3,367.00

148 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes inlcuding bed concrete as per standard design. 0.00 0.00

19.2.1 100 mm diameter S.W pipe 28.00 Metre 404.30 11,320.00

19.2.2 150 mm diameter S.W pipe 115.00 Metre 494.40 56,856.00

19.2.3 200 mm diameter S.W pipe 10.00 Metre 576.30 5,763.00

19.2.4 250 mm diameter S.W pipe 112.00 Metre 666.50 74,648.00

149 19.3 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W Pipes including bed concrete as per standard design: 0.00 0.00

19.3.5 300mm diameter S.W pipe 52.00 Metre 491.70 25,568.00

150 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 0.00 0.00

19.4.3 180x150 mm size P type 0.00

19.4.3.2 With Sewer bricks conforming to IS : 4885 12.00 Each 2,006.90 24,083.00

151 19.6 Providing, laying Non pressure NP2 class (light duty) RCC Pipes with collars jointed with stiff mixture of cement mortar in the propoertion of 1:2 (1 cement : 2 fine sand) including testing and jointing etc complete. 0.00 0.00

19.6.2 150mm dia RCC pipe 112.00 Metre 410.70 45,998.00

19.6.3 250mm dia RCC Pipe 92.00 Metre 677.40 62,321.00

19.6.4 300mm dia RCC Pipe 45.00 Metre 780.00 35,100.00

19.6.5 450mm dia RCC Pipe 30.00 Metre 1,318.80 39,564.00

152 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. 0.00 0.00

19.7.1 Inside size 90x80 cm and 60 cm deep including CI Cover with frame (light duty ) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg) 0.00

19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 8.00 Each 7,914.70 63,318.00

19.7.1.2 With Sewer bricks conforming to IS : 4885 8.00 Each 7,948.10 63,585.00

153 19.8 Extra depth for manholes 0.00 0.00

19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 4.00 Metre 5,660.00 22,640.00

19.8.1.2 With Sewer bricks conforming to IS : 4885 12.00 Metre 5,757.40 69,089.00

154 19.9 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.00 0.00

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 0.00

19.9.1.1 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 6.00 Each 7,090.00 42,540.00

19.9.1.2 With Sewer bricks conforming to IS : 4885 3.00 Each 7,077.40 21,232.00

155 19.1 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m 0.00 0.00

19.10.1 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 5.00 Metre 4,917.95 24,590.00

19.10.2 With Sewer bricks conforming to IS : 4885 2.00 Metre 4,917.95 9,836.00

156 19.11 Constructing brick masonry circular type manhole 1.2 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.00 0.00

19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 0.00

19.11.1.1 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 5.00 Each 13,865.00 69,325.00

19.11.1.2 With Sewer bricks conforming to IS : 4885 2.00 Each 13,927.10 27,854.00

157 19.12 Extra depth for circular type manhole 1.22 m internal dia (at bottom)beyond 1.68 m to 2.29 m : 0.00 0.00

19.12.1 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 6.00 Metre 6,283.70 37,702.00

19.12.2 With Sewer bricks conforming to IS : 4885 2.00 Metre 6,390.10 12,780.00

158 19.13 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.00 0.00

19.13.1 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 0.00

19.13.1.2 With Sewer bricks conforming to IS : 4885 2.00 Each 31,043.70 62,087.00

159 19.14 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : 0.00 0.00

19.14.2 With Sewer bricks conforming to IS : 4885 2.00 Metre 15,288.30 30,577.00

160 19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protrude legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. 231.00 Each 310.90 71,818.00

161 19.19 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 0.00 0.00

19.19.4.1 Circular shape 560 mm internal dia 4.00 Sqm 1,393.20 5,573.00

162 19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : 0.00 0.00

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 12.00 Each 3,743.30 44,920.00

163 24.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 0.00

164 24.2.1.1 oring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), ,all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 0.00 0.00

165 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings&accessories etc. all complete, for all depths,as per direction of Engineer -incharge. 0.00 0.00

24.3.2 150 mm nominal size dia 516.00 Metre 660.10 340,612.00

166 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.e. 0.00 0.00

24.4.2 150 mm nominal size dia 206.00 Metre 673.50 138,741.00

167 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. 0.40 Cum 1,188.90 476.00

168 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge 0.40 Cum 1,195.60 478.00

169 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge 0.80 Cum 1,195.60 956.00

170 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 10.94 Cum 1,343.20 14,695.00

171 24.9 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. 2.00 Each 1,213.20 2,426.00

172 24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 0.00 0.00

173 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.150 mm clamp 8.00 Each 1,531.40 12,251.00

174 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).150 mm dia 8.00 Each 281.80 2,254.00

175 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 60.00 Hrs. 916.80 55,008.00

176 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching,refilling & testing of joints complete as per direction of Engineer in Charge. 0.00 0.00

18.7.4 32 mm nominal outer dia Pipes 360.00 Metre 395.20 142,272.00

177 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 0.00 0.00

18.10.5 40 mm dia nominal bore 0.00 Metre 457.80 0.00

178 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 0.00 0.00

18.46.5 40 mm dia nominal bore 0.00 Each 419.70 0.00

Applying Correction Factor @ 0.982 on Scheduled Items for All Works (A) 0.00 ₹ 104,643,130.00

Add Additional GST 5.36% on (A) 0.00 ₹ 5,608,872.00

179 N.S Supplying and fittings 2.00 HP Submersible water pump with starter cables etc. all necessary fitting etc. all complete jobs. 6.00 Each 23,659.00 141,954.00

Fire Fighting 0.00

180 7 Providing, laying , testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasket etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 0.00 0.00

181 9 Supply and fixing single headed internal hydrant valve with instanteneous Gunmetal/Stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless steel cap and chain as required. 0.00

10.1 Single headed Gunmetal 26.00 Set 7,245.00 188,370.00

182 11 Supply,fixing,testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS:13095 of following size as required. 0.00 0.00

183 14 Providing, installation, testing and commissioning of non-return valve of following sizes conforming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 0.00 0.00

184 15 Providing , installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6mm thick stainless steel, Grade 304, sheet with 3mm dia holes with stainless steel flange. 0.00

185 16 Supplying and fixing 63mm dia, 15m long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 ( Type-A) as required: 0.00 0.00

186 17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20mm nominal dia water hose thermoplastic ( Textile reinforced) type-2 as per IS:12585 20mm nomonal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. " Connections from riser with 25mm dia stop gunmetal valve & M.S Pipe and socket. 0.00 0.00

187 18 Supplying and fixing 63mm dia gun metal short branch pipe with 20mm nominal diameter size nozzle confirming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. 0.00 0.00

188 19 Supplying and fixing for Fire Brigade Connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as required for suitable dia MS pipe connection conforming to IS 904 as required. 0.00

189 20 Supplying and fixing air vessel made of 250mm dia. 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 6.00 Set 17,707.00 106,242.00

190 21 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68℃ with required accessories: 0.00

21.1 Pendent Sprinkler 240.00 Each 408.00 97,920.00

191 22 Providing and fixing of Pressure switch in M.S pipe line including connection etc. as required. 6.00 Each 1,442.00 8,652.00

192 NS M.S. hose cabinet with door fabricated from 16 g M.S. sheet with full glass door and locking arrangement, suitable to accommodate 1 Hydrant landing valve, 1 fire hose reel, 2 nos.15m long 63mmdia hose,1-branch pipe, The door shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required (Approx. size 1.2m x 2.1m). For internal hydrants. 16.00 Each 6,156.00 98,496.00

Fire Detection & Alarm System 0.00 0.00

193 17.1.9 Supplying, installation, testing and commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 0.00 0.00

194 17.1.3 Supplying, installatio, testing and commisioning of manual call boxes of MS construction in surface/recess with stainless steel chain hammer assembly complete with glass and push button etc. as required. 44.00 Each 474.00 20,856.00

195 17.1.7 Supplying, installatio, testing and commisioning of fire alarm sounder with facility to make announcement, mounted in ABS box with hinged cover plate and suitable for operation with amplifier i/c line matching transformer etc. complete as required. 44.00 Each 491.00 21,604.00

Cabling & Wiring 0.00 0.00

196 17.5.1 Supplying and laying of 2x1.5 sq.mm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable Ethylene propylene Rubber (EPR) insulation and LSZH inner bedding steel wire armouring and LSZH outer sheath complete as required. 540.00 Metre 359.00 193,860.00

197 7.1 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00 0.00

198 NS ISI marked (IS:2878) Portable fire Extinguisher, Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1m long & complete in all respects including initial fill with C02 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket. 0.00 0.00

M.R Capacity 4.5 Kg 45.00 Each 21,952.00 987,840.00

199 NS 'ABC' stored pressure type Dry Chemical Powder (Mono-Ammonium Phosphate ) 6 kg fire extinguisher with fixing hangers, hose, brackets, screws to required size etc., complete as per IS:14609. 0.00 0.00

M.R Capacity 6 Kg 45.00 Each 6,040.00 271,800.00

Electrification Work

1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00

Button Holder 125.00 0.00

Tube light 103.00 0.00

Down lighter 29.00 0.00

Fan point 52.00 0.00

Ex. Fan point 32.00 0.00

LED st. light point 7.00 0.00

Call Bell point 16.00

2 1.28 Supplying and fixing following modular base and cover plate on existing modular metal boxes etc as required. 0.00

3 1.31 Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps. modular socket outlet and 5/6 amps. modular switch, connections etc. As required. 80.00 each 414.00 33,120.00

4 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. As reqd. 60.00 each 531.00 31,860.00

5 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 900.00 per mtr 309.00 278,100.00

6 1.53 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amps modular SP MCB 'C' curve, including connections, painting etc. as required. (for AC terminal) 16.00 Each 683.00 10,928.00

7 1.55 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 2 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as reqd. 32.00 Each 632.00 20,224.00

8 1.7 Wiring for circuit/submain wiring along with earth wire with the following size of FRLS PVC insulated copper conducter SC cable in surface / recessed medium class PVC conduit as required. 0.00

1.7.1 2 X 1.5 sq mm + 1 X 1.5 sq mm(for ckt + 5amp socket) 910.00 per mtr 201.00 182,910.00

1.7.2 2 X 2.5 sq mm + 1 X 2.5 sq mm (For computer ) 480.00 per mtr 246.00 118,080.00

9 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed PVC conduit as required 0.00

1.15.1 1x1.5 sq.mm (for inverter) 400.00 p.mtr 38.00 15,200.00

10 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar, din bar inerconnections, powder painted including earthing etc. as reqd.(But without MCB/RCCB/Isolator) 0.00

2.8.6 8 ways, Double door 32.00 Each 2,591.00 82,912.00

11 2.12 S/F following rating, 240/415 volts, 'C' curve circuit breaket suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as reqd. 0.00

2.12.1 6 A to 32 A, Single pole 192.00 each 237.00 45,504.00

12 2.13 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

FITTING & FIXTURES 0.00

13 1.33 Supplying and fixing 2 pin, 5/6 amps ceiling rose on the existing junction box / wooden block including connection etc as required. 193.00 each 64.00 12,352.00

14 1.34 Supplying and fixing batten/angle holder including connection etc as required. 125.00 each 80.00 10,000.00

15 6.1 Supplying & fixing of following types lamp in the existing electrical fitting/fixtures etc. As reqd. 0.00

16 1.38 S/F electronic musical call bell suitable for single phase 230 volts complete bell as required. 16.00 each 351.00 5,616.00

17 5.1 Supplying and fixing 4' X 18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 103.00 Each 521.00 53,663.00

18 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

19 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00

20 8.5 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 7.00 per set 1,038.00 7,266.00

21 1.25 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/switch box including connections but excluding modular plate etc. As required. 52.00 each 358.00 18,616.00

22 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 52.00 Each 2,482.00 129,064.00

23 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

MAIN PANEL 0.00

24 2.4 P/F following capacity rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connections etc. as required. 0.00

25 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

26 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

27 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc. 16.00 Sq.ft 1,809.00 28,944.00

28 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1.00 p.mtr 6,536.00 6,536.00

29 A/R Supplying of copper strip of all sizes for busbar strip/interconnection including drilling holes etc as reqd. 12.00 Kg 871.00 10,452.00

30 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

31 7.1 Laying of one number additional pvc insulated and pvc sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioingi, protective covering and refilling the trench etc. as reqd.

7.1.3 Above 95 sq.mm and upto 185 sq.mm 95.00 p/mtr 336.00 31,920.00

32 3.6 Earthing with copper earth plate 600 mm x 600mm x3mm G.I thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 mtr long etc. with charcoal /coke and salt as required. 1.00 per set 13,721.00 13,721.00

33 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 20.00 meter 144.00 2,880.00

Lighting Arrester 0.00

34 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 4.00 Each 416.00 1,664.00

35 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 8.00 Each 81.00 648.00

36 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 120.00 Metre 102.00 12,240.00

37 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 80.00 Metre 145.00 11,600.00

38 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 4.00 Each 102.00 408.00

39 3.2 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal and salt as required. 2.00 Set 6,323.00 12,646.00

40 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble as reqd. 40.00 p.mtr 37.00 1,480.00

41 3.15 Providing and fixing 25 mmX 5 mm G.I. strip on surface or in recess for connection etc. as required. 30.00 Metre 195.00 5,850.00

42 NS Supply, installation, testing, commissioning, and final testing of automatic lift complete in the shaft well and pit already constructed as per CPWD specification including automatic rescue device (ARD), All standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) on turnkey basis, Conforming to NBC/statutory norms and fulfilling following requirements.(Make- Otis, Kone, Schindler, Mitshubishi, Thyssen Krupp) 0.00

(i) Type: Passenger lift. 0.00

(ii) Load: As specified 0.00

(iii) Speed: 1.00 metre/sec. 0.00

(iv) Control: ACV3F, 32bit microprocessor integrated serial communication control system with RMS (remote monitoring system)/BMS (building monitoring system) supporting software. 0.00

(v) Motor/machine: Permanent magnetic synchronous gearless motor. 0.00

(vi) Operation: Simplex collective selective with/without lift attendant. 0.00

(vii) Total rise: About 3 mtrs. (approx) between two stops. 0.00

(viii) Landings: All floors on same side. 0.00

(ix) Floors served: As Specified 0.00

(x) Signals: Digital car position indicator, car travel direction indicator inside car & at all landings, voice annunciator with suitable music shall be provided in the lift car. 0.00

(xi) Shaft size: As per manufacturer's design and as per CPWD specification (Part III LIFTS), Shaft to be constructed separately. 0.00

(xii) Guide rail: As per manufacturer's specification. 0.00

(xiii) Lift & car size: As per manufacturer's design and as per CPWD specification (Part III LIFTS). 0.00

(xiv) Car entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS).

(xv) Landing entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). 0.00

(xvi) Car door: S.S. (stainless steel) hairline finish centre/telescopic opening door with vision panel. 0.00

(xvii) Landing door: S.S. (stainless steel) hairline finish centre/telescopic opening door with vision panel. 0.00

(xviii) Door operation: Automatic electric power operated door, full height infrared curtain with multiple criss/cross light beams. 0.00

(xix) Car interior: S.S. (stainless steel) panel with hair line finish on all sides. 0.00

(xx) Car floor: Anti skid PVC flooring on heavy duty M S (mild steel) platform.

(xxi) Car ceiling & lighting: S. S. (stainless steel) finish with aesthetic appearance with LED ceiling lights 0.00

(xxii) Carventilation: Pressure fan/blower fan (car fan with automatic sleep timer shall be provided).

(xxiii) Emergency lighting in car: Battery operated emergency lighting in the lift car. 0.00

(xxiv) Intercom system: Battery operated intercom system in lift car, machine room and ground floor/control room. 0.00

(xxv) Emergencyalarm: Battery operated alarm bell system in lift car & control room / ground floor. 0.00

(xxvi) Position of machine room: MRL 0.00

(xxvii) Electric power supply: AC 415 V, 3 phases 50 Hz & AC 230 V 1phase 50Hz terminated in machine room. 0.00

(xxviii) Fire man switch : Fire man switch at machine room/terminal landing 0.00

(xxix) All car panel buttons and all floor switches must be with Braille language as per lift act. 0.00

(xxx) Audio visual indication in the lift car showing overloading shall be provided such that doors keep open till excess load is removed. 0.00

(xxxi) Spring buffer/hydraulic buffer shall be provided 0.00

(xxxii) Mechanical over speed governor, door key holes in the floor doors shall be provided. 0.00

(xxxiii) Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for the machines etc. 0.00

(xxxiv) In the hoist way fascia plate shall be provided. 0.00

(xxxv) Permanent wiring in lift machine room and lift well with proper no. of light points, with fixtures, exhaust fan, plug points and 3 phase 440V power supply shall be made in lift shaft by the department, machine room or at desired level. 0.00

(xxxvi) Car top safety barricade shall be provided. 0.00

(xxxvii) ARD (automatic rescue device): Solid state inbuilt automatic rescue device (ARD) automatically rescues passengers trapped in the lift car in between floors in the event of power failure. Automatic operation and immediate action in the event of mains failure, capable of moving the lift to the nearest landing, opens the automatic door of the lift car and floor. Sealed maintenance free battery backup with automatic charging unit and auto changeover device on mains failure.(With 3 year free maintanance in DLP period) 0.00

Annual Operation of lift 0.00

first year (One Shift) 1.00 No. 194100.00 194,100.00

Second year (One Shift) 1.00 No. 209,628.00 209,628.00

Third year (One Shift) 1.00 No. 226,398.00 226,398.00

Required Electrical Installation 0.00

43 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00

44 5.1 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. 5.00 p.mtr 1,275.00 6,375.00

45 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

7.7.8 35 sq. mm, 3.5 core main point to lift m/s 40.00 p/mtr. 415.00 16,600.00

46 7.4 Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 0.00

7.4.1 Upto 35 sq. mm (Clamped with 1 mm thick saddle) 35.00 mtr 43.00 1,505.00

47 2.1 P/F/F sheet metal main switch disconnector fuse unit in existing metal board with rewirable type fuses, including drilling holes in metal board, making connection as reqd. 0.00

48 2.5 P/F/F bus bar chamber with 4 strips of suitable size made of copper heavy duty complete with all accessoires including connection earthing the body etc.as reqd. 0.00

49 3.21 Providing chemical/ mineral maintenance free aerthing system comprising of copper earth electrode 3 metre length and 17.2 mm outer dia along with 25 Kg earth electrode conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth inspection pit etc. as required. 2.00 p/set 16,675.00 33,350.00

50 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 40.00 mtr 144.00 5,760.00

51 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

52 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 6.00 Each 414.00 2,484.00

53 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.8.5 6 way, Single door 2.00 Each 2197.00 4,394.00

54 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.12.1 6 A to 32 A, Single pole 5.00 Each 237.00 1,185.00

CCTV SURVEILLANCE SYSTEM 0.00

55 N/S SITC of Dome Camera :- Image Sensor 1/3" 3 megapixel progressive scan CMOS,Effective Pixels 2304 (H) × 1296 (V),Electronic Shutter Speed Min.Illumination 0.045 lux, F2.1 (Color);0 lux (IR LEDs on),IR Distance Up to 100 ft (30 m), depending on scene reflectance, Day/Night Auto (ICR)/Color/BW,Backlight Compensation BLC/HLC/DWDR,White Balance Auto/Manual, Gain Control Auto/Manual,Noise Reduction 3D,Privacy Masking Up to 4 areas,Focal Length vari focal 2.8mm-12mm,Max. Aperture F2.1,Horizontal Angle of View 92°,Lens Type Fixed,Video Compression H.264 (Main/High/Baseline Profile)/MJPEG,Resolution "3 MP (2304×1296), 1080p (1920×1080), 720p (1280×720), D1 (704×576/704×480), CIF (352×288/352×240)",Frame Rate Main Stream 3 MP (1–20 fps), 1080p (1–25/30 fps),Frame Rate Sub Stream D1, CIF (1–25/30 fps),Bit Rate H.264: 4–8192 kbps,Corridor Mode,Ethernet RJ-45 (10/100Base-T),Protocol IPv4/IPv6, HTTP, HTTPS, TCP/IP, UDP, UPnP, ICMP, IGMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPoE, DDNS, FTP, IP Filter, QoS,Compatibility ONVIF Profile S,CGI,Max. User Access 20 users,Mobile App HonView Touch for iPhone, iPad, Android Phone and Tablet. Make - Hikvision/Honeywell/Bosch 14.00 Each 11500.00 161,000.00

56 N/S SITC of Video Recorder : - Simultaneous multi-channel live view, real-time recording, playback, network operation, remote access, USB backup;User Interface Support 16-bit true color graphical menu interface and mouse operation;Preview Screen 1 / 4 / 8 / 16 / 24 Windows, Video Standards PAL (625 line, 50f/s), NTSC (525 line, 60f/s);Video Compression H.264 High profile; Display Monitor: D1; VGA & HDMI: HD (support 1920 x 1080, 1280 x 720, 1440 x 900, 1280 x 1024, 1024 x 768, 800 x 600);Video Play Quality 3 Megapixel / 1080P / 720P;Video Access 8 channels 5M / 16 channels 3M / 24 channels 1080P / 32 channels 960P;Video Motion Detection,Audio Compression G.711A; Manual / Alarm / Video Detection / Timing, real- time, Record & Playback Search Mode Time / Calendar / Event / Channel, Storage & Backup network,Storage & Backup Backup Mode Network backup, USB HDD, USB writer, SATA writer,Interface Video Input RJ45,Interface Video Output 1 channel VGA, 1 channel HDMI, Interface USB Port 2 USB 2.0 port for mouse, backup, burning and upgrading, Interface HDD Interface 4 SATA, Make - Hikvision/Honeywell/Bosch 1.00 Each 42300.00 42,300.00

57 N/S Supply installation Testing coomissioning of 108 cm (43") full HD flate smart TV. Make- LG/Samsung/Sony 1.00 Each 51600.00 51,600.00

58 N/S SITC of Network Switch :- 24 x 10/100/1000BASE-T, PoE, fixed, 2 x SFP 100/1000 Mbps, 52 Gbps Sitching Performance capacity, 39 Mbps Forwarding Performance rate, 525 K Byte Packet buffer, 8k MAC address table, 9k byte Jumbo frame, 170 Watt PoE power. Make - Dlink/Hikvision/Cisco 2.00 Each 43600.00 87,200.00

59 1.58.1 Supplying and drawing of UTP 4 pair CAT-6 LAN cable in the existing surface/recessed steel /PVC concuitas required. Make - Dlink/Legrand/Molex 560.00 MTR 52.00 29,120.00

60 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00

61 N/S Supply fitting fixing Rack 19" 9U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make. 1.00 EACH 9,500.00 9,500.00

62 N/S SITC of HDMI Cable 10 mtrs Make - Honetwell/Kramer 1.00 EACH 2,450.00 2,450.00

63 N/S SITC of Surveillance Hard Disk 4 TB. Make - Seagate/WD/Toshiba 2.00 Each 18,000.00 36,000.00

PART :- 'G' SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM 0.00

64 DSR Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specification as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, Conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2, Solar Photovoltaic Module conversion efficiency shall not be less than 16.5% PV modules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. (c) Data Monitoring System complete with accessories. (d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (e) Lightning and surge voltage protection. (f) Connections and interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kv grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. 13.00 KWp 64,332.00 836,316.00

PART 'B':- Principle-cum-Faculty Quarter (G+4) 0.00

65 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00

Button Holder 215.00

Tube light 191.00 0.00

Down lighter 11.00 0.00

Fan point 94.00 0.00

Ex. Fan point 51.00 0.00

LED st. light point 8.00 0.00

Call Bell point 17.00 0.00

66 1.28 Supplying and fixing following modular base and cover plate on existing modular metal boxes etc as required. 0.00

67 1.31 Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps. modular socket outlet and 5/6 amps. modular switch, connections etc. As required. 111.00 each 414.00 45,954.00

68 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. As reqd. 107.00 each 531.00 56,817.00

69 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1605.00 per mtr 309.00 495,945.00

70 1.53 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amps modular SP MCB 'C' curve, including connections, painting etc. as required. (for AC terminal) 35.00 Each 683.00 23,905.00

71 1.55 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 2 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as reqd. 69.00 Each 632.00 43,608.00

72 1.7 Wiring for circuit/submain wiring along with earth wire with the following size of FRLS PVC insulated copper conducter SC cable in surface / recessed medium class PVC conduit as required. 0.00

1.7.1 2 X 1.5 sq mm + 1 X 1.5 sq mm(for ckt + 5amp socket) 1468.00 per mtr 201.00 295,068.00

1.7.2 2 X 2.5 sq mm + 1 X 2.5 sq mm (For computer ) 1035.00 per mtr 246.00 254,610.00

73 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed PVC conduit as required 0.00

1.15.1 1x1.5 sq.mm (for inverter) 400.00 p.mtr 38.00 15,200.00

74 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar, din bar inerconnections, powder painted including earthing etc. as reqd.(But without MCB/RCCB/Isolator) 0.00

2.8.6 8 ways, Double door 34.00 Each 2,591.00 88,094.00

75 2.12 S/F following rating, 240/415 volts, 'C' curve circuit breaket suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as reqd.

2.12.1 6 A to 32 A, Single pole 216.00 each 237.00 51,192.00

76 2.13 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

FITTING & FIXTURES 0.00

77 1.33 Supplying and fixing 2 pin, 5/6 amps ceiling rose on the existing junction box / wooden block including connection etc as required. 353.00 each 64.00 22,592.00

78 1.34 Supplying and fixing batten/angle holder including connection etc as required. 215.00 each 80.00 17,200.00

79 6.1 Supplying & fixing of following types lamp in the existing electrical fitting/fixtures etc. As reqd.

80 1.38 S/F electronic musical call bell suitable for single phase 230 volts complete bell as required. 17.00 each 351.00 5,967.00

81 5.1 Supplying and fixing 4' X 18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 191.00 Each 521.00 99,511.00

82 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00

83 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00

84 8.5 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 8.00 per set 1,038.00 8,304.00

85 1.25 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/switch box including connections but excluding modular plate etc. As required. 94.00 each 358.00 33,652.00

86 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 94.00 Each 2,482.00 233,308.00

87 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00

MAIN PANEL 0.00

88 2.4 P/F following capacity rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connections etc. as required. 0.00

89 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

90 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

91 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc. 16.00 Sq.ft 1,809.00 28,944.00

92 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1.00 p.mtr 6,536.00 6,536.00

93 A/R Supplying of copper strip of all sizes for busbar strip/interconnection including drilling holes etc as reqd. 12.00 Kg 871.00 10,452.00

94 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

95 7.1 Laying of one number additional pvc insulated and pvc sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioingi, protective covering and refilling the trench etc. as reqd.

7.1.3 Above 95 sq.mm and upto 185 sq.mm 95.00 p/mtr 336.00 31,920.00

96 3.6 Earthing with copper earth plate 600 mm x 600mm x3mm G.I thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 mtr long etc. with charcoal /coke and salt as required. 1.00 per set 13,721.00 13,721.00

97 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 20.00 meter 144.00 2,880.00

Lighting Arrester 0.00

98 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 4.00 Each 416.00 1,664.00

99 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 8.00 Each 81.00 648.00

100 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 120.00 Metre 102.00 12,240.00

101 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 80.00 Metre 145.00 11,600.00

102 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 4.00 Each 102.00 408.00

103 3.2 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal and salt as required. 2.00 Set 6,323.00 12,646.00

104 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble as reqd. 40.00 p.mtr 37.00 1,480.00

105 3.15 Providing and fixing 25 mmX 5 mm G.I. strip on surface or in recess for connection etc. as required. 30.00 Metre 195.00 5,850.00

106 NS Supply, installation, testing, commissioning, and final testing of automatic lift complete in the shaft well and pit already constructed as per CPWD specification including automatic rescue device (ARD), All standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) on turnkey basis, Conforming to NBC/statutory norms and fulfilling following requirements.(Make- Otis, Kone, Schindler, Mitshubishi, Thyssen Krupp) 0.00

(i) Type: Passenger lift. 0.00

(ii) Load: As specified 0.00

(iii) Speed: 1.00 metre/sec. 0.00

(iv) Control: ACV3F, 32bit microprocessor integrated serial communication control system with RMS (remote monitoring system)/BMS (building monitoring system) supporting software. 0.00

(v) Motor/machine: Permanent magnetic synchronous gearless motor. 0.00

(vi) Operation: Simplex collective selective with/without lift attendant. 0.00

(vii) Total rise: About 3 mtrs. (approx) between two stops. 0.00

(viii) Landings: All floors on same side. 0.00

(ix) Floors served: As Specified 0.00

(x) Signals: Digital car position indicator, car travel direction indicator inside car & at all landings, voice annunciator with suitable music shall be provided in the lift car. 0.00

(xi) Shaft size: As per manufacturer's design and as per CPWD specification (Part III LIFTS), Shaft to be constructed separately. 0.00

(xii) Guide rail: As per manufacturer's specification. 0.00

(xiii) Lift & car size: As per manufacturer's design and as per CPWD specification (Part III LIFTS). 0.00

(xiv) Car entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). 0.00

(xv) Landing entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). 0.00

(xvi) Car door: S.S. (stainless steel) hairline finish centre/telescopic opening door with vision panel. 0.00

(xvii) Landing door: S.S. (stainless steel) hairline finish centre/telescopic opening door with vision panel. 0.00

(xviii) Door operation: Automatic electric power operated door, full height infrared curtain with multiple criss/cross light beams. 0.00

(xix) Car interior: S.S. (stainless steel) panel with hair line finish on all sides.

(xx) Car floor: Anti skid PVC flooring on heavy duty M S (mild steel) platform. 0.00

(xxi) Car ceiling & lighting: S. S. (stainless steel) finish with aesthetic appearance with LED ceiling lights 0.00

(xxii) Carventilation: Pressure fan/blower fan (car fan with automatic sleep timer shall be provided).

(xxiii) Emergency lighting in car: Battery operated emergency lighting in the lift car. 0.00

(xxiv) Intercom system: Battery operated intercom system in lift car, machine room and ground floor/control room. 0.00

(xxv) Emergencyalarm: Battery operated alarm bell system in lift car & control room / ground floor. 0.00

(xxvi) Position of machine room: MRL 0.00

(xxvii) Electric power supply: AC 415 V, 3 phases 50 Hz & AC 230 V 1phase 50Hz terminated in machine room. 0.00

(xxviii) Fire man switch : Fire man switch at machine room/terminal landing 0.00

(xxix) All car panel buttons and all floor switches must be with Braille language as per lift act. 0.00

(xxx) Audio visual indication in the lift car showing overloading shall be provided such that doors keep open till excess load is removed.

(xxxi) Spring buffer/hydraulic buffer shall be provided 0.00

(xxxii) Mechanical over speed governor, door key holes in the floor doors shall be provided. 0.00

(xxxiii) Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for the machines etc. 0.00

(xxxiv) In the hoist way fascia plate shall be provided. 0.00

(xxxv) Permanent wiring in lift machine room and lift well with proper no. of light points, with fixtures, exhaust fan, plug points and 3 phase 440V power supply shall be made in lift shaft by the department, machine room or at desired level. 0.00

(xxxvi) Car top safety barricade shall be provided. 0.00

(xxxvii) ARD (automatic rescue device): Solid state inbuilt automatic rescue device (ARD) automatically rescues passengers trapped in the lift car in between floors in the event of power failure. Automatic operation and immediate action in the event of mains failure, capable of moving the lift to the nearest landing, opens the automatic door of the lift car and floor. Sealed maintenance free battery backup with automatic charging unit and auto changeover device on mains failure.(With 3 year free maintanance in DLP period) 0.00

Annual Operation of lift 0.00

first year (One Shift) 1.00 No. 194,100.00 194,100.00

Second year (One Shift) 1.00 No. 209,628.00 209,628.00

Third year (One Shift) 1.00 No. 226,398.00 226,398.00

Required Electrical Installation 0.00

107 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00

108 5.1 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. 5.00 p.mtr 1,275.00 6,375.00

109 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

7.7.8 35 sq. mm, 3.5 core main point to lift m/s 40.00 p/mtr. 415.00 16,600.00

110 7.4 Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 0.00

7.4.1 Upto 35 sq. mm (Clamped with 1 mm thick saddle) 35.00 mtr 43.00 1,505.00

111 2.1 P/F/F sheet metal main switch disconnector fuse unit in existing metal board with rewirable type fuses, including drilling holes in metal board, making connection as reqd. 0.00

112 2.5 P/F/F bus bar chamber with 4 strips of suitable size made of copper heavy duty complete with all accessoires including connection earthing the body etc.as reqd. 0.00

113 3.21 Providing chemical/ mineral maintenance free aerthing system comprising of copper earth electrode 3 metre length and 17.2 mm outer dia along with 25 Kg earth electrode conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth inspection pit etc. as required. 2.00 p/set 16,675.00 33,350.00

114 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 40.00 mtr 144.00 5,760.00

115 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

116 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 6.00 Each 414.00 2,484.00

117 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.8.5 6 way, Single door 2.00 Each 2,197.00 4,394.00

118 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.12.1 6 A to 32 A, Single pole 5.00 Each 237.00 1,185.00

CCTV SURVEILLANCE SYSTEM 0.00

119 N/S SITC of Dome Camera :- Image Sensor 1/3" 3 megapixel progressive scan CMOS,Effective Pixels 2304 (H) × 1296 (V),Electronic Shutter Speed Min.Illumination 0.045 lux, F2.1 (Color);0 lux (IR LEDs on),IR Distance Up to 100 ft (30 m), depending on scene reflectance, Day/Night Auto (ICR)/Color/BW,Backlight Compensation BLC/HLC/DWDR,White Balance Auto/Manual, Gain Control Auto/Manual,Noise Reduction 3D,Privacy Masking Up to 4 areas,Focal Length vari focal 2.8mm-12mm,Max. Aperture F2.1,Horizontal Angle of View 92°,Lens Type Fixed,Video Compression H.264 (Main/High/Baseline Profile)/MJPEG,Resolution "3 MP (2304×1296), 1080p (1920×1080), 720p (1280×720), D1 (704×576/704×480), CIF (352×288/352×240)",Frame Rate Main Stream 3 MP (1–20 fps), 1080p (1–25/30 fps),Frame Rate Sub Stream D1, CIF (1–25/30 fps),Bit Rate H.264: 4–8192 kbps,Corridor Mode,Ethernet RJ-45 (10/100Base-T),Protocol IPv4/IPv6, HTTP, HTTPS, TCP/IP, UDP, UPnP, ICMP, IGMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPoE, DDNS, FTP, IP Filter, QoS,Compatibility ONVIF Profile S,CGI,Max. User Access 20 users,Mobile App HonView Touch for iPhone, iPad, Android Phone and Tablet. Make - Hikvision/Honeywell/Bosch 14.00 Each 11,500.00 161,000.00

120 N/S SITC of Video Recorder : - Simultaneous multi-channel live view, real-time recording, playback, network operation, remote access, USB backup;User Interface Support 16-bit true color graphical menu interface and mouse operation;Preview Screen 1 / 4 / 8 / 16 / 24 Windows, Video Standards PAL (625 line, 50f/s), NTSC (525 line, 60f/s);Video Compression H.264 High profile; Display Monitor: D1; VGA & HDMI: HD (support 1920 x 1080, 1280 x 720, 1440 x 900, 1280 x 1024, 1024 x 768, 800 x 600);Video Play Quality 3 Megapixel / 1080P / 720P;Video Access 8 channels 5M / 16 channels 3M / 24 channels 1080P / 32 channels 960P;Video Motion Detection,Audio Compression G.711A; Manual / Alarm / Video Detection / Timing, real- time, Record & Playback Search Mode Time / Calendar / Event / Channel, Storage & Backup network,Storage & Backup Backup Mode Network backup, USB HDD, USB writer, SATA writer,Interface Video Input RJ45,Interface Video Output 1 channel VGA, 1 channel HDMI, Interface USB Port 2 USB 2.0 port for mouse, backup, burning and upgrading, Interface HDD Interface 4 SATA, Make - Hikvision/Honeywell/Bosch 1.00 Each 42,300.00 42,300.00

121 N/S Supply installation Testing coomissioning of 108 cm (43") full HD flate smart TV. Make- LG/Samsung/Sony 1.00 Each 51600.00 51,600.00

122 N/S SITC of Network Switch :- 24 x 10/100/1000BASE-T, PoE, fixed, 2 x SFP 100/1000 Mbps, 52 Gbps Sitching Performance capacity, 39 Mbps Forwarding Performance rate, 525 K Byte Packet buffer, 8k MAC address table, 9k byte Jumbo frame, 170 Watt PoE power. Make - Dlink/Hikvision/Cisco 2.00 Each 43,600.00 87,200.00

123 1.58.1 Supplying and drawing of UTP 4 pair CAT-6 LAN cable in the existing surface/recessed steel /PVC concuitas required. Make - Dlink/Legrand/Molex 560.00 MTR 52.00 29,120.00

124 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00

125 N/S Supply fitting fixing Rack 19" 9U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make. 1.00 EACH 9,500.00 9,500.00

126 N/S SITC of HDMI Cable 10 mtrs Make - Honetwell/Kramer 1.00 EACH 2,450.00 2,450.00

127 N/S SITC of Surveillance Hard Disk 4 TB. Make - Seagate/WD/Toshiba 2.00 Each 18,000.00 36,000.00

PART :- 'G' SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM 0.00

128 DSR Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specification as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, Conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2, Solar Photovoltaic Module conversion efficiency shall not be less than 16.5% PV modules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. (c) Data Monitoring System complete with accessories. (d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (e) Lightning and surge voltage protection. (f) Connections and interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kv grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. 19.00 KWp 64,332.00 1,222,308.00

Net Total:- ₹ 128,925,666.00 #REF!

Executive Engineer

Building Division, Purnea