Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹79.2 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹80.0 L+₹78,600 (0.99%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹89.4 L+₹10.2 L (12.9%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹96.6 L+₹17.4 L (22.0%)Rejected-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹99.6 L+₹20.3 L (25.6%)Rejected-Finance NOT AVAILABLE | L5 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
4 May 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) Navy Nagar, Colaba, Mumbai
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
REPAIR AND RETROFITTING OF STRUCTURAL MEMBER OF CERTAIN BUILDINGS AT OLD AND NEW NAVY NAGAR OF AGE BR I UNDER GE NW NAVY NAGAR COLABA MUMBAI
2023_MES_587714_1
8264/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar, Colaba
Class B and Category a(i)
8 documents required · 8 mandatory
₹1,000
GE NW NAVY NAGAR COLABA MUMBAI
₹2.2 L
Yes
15 Jun 2023
31 Mar 2023
5 May 2023
31 Mar 2023
4 May 2023
21 Apr 2023
31 Mar 2023 - 27 Apr 2023
Amount
M&L for Shear thinning agents in RC/ walls/ ceiling/ columns/ beams/floor/bricks cracks after opening up in “V” groove manner covering the area of 300mm from central line of crack with the depth of 8 mm complete with three components compound graded filler, E-Resins and Shear thinning agents with adjustable consistency by varying the filler component epoxy resin based complete all as specified and directed by Engineer in Charge.
M&L for profundity of 15 mm and 18 mm dia, expel dust, etc by vacuum cleaner and blowers, providing and fixing of heavy grade hsn 7307 pvc perforated nipple 15 mm dia, 50 mm long, @ 1.0 Mtr. C/C in both direction and injection cement slurry blended with using integral water proofing liquid admixture for cement based concrete and mortar Chemical Confirms to IS 2645-2003. having specific gravity 1.1-1.2 gms/cc, chloride content Nil as per IS 2645-2003 & using plasticized expanding cementitious admixture and hydrolysis resistant primer cement modifier, provides excellent bond to concrete, Improves tensile and flexural properties of mortar,Versatile and water based lignosulphonates concrete bonding agent chemical, reduces the water demand for required workability and minimises segregation and bleeding, minimize permeability and increase the waterproofing properties of concrete and mortars . having specific gravity of 1.02 using expending power grout admixture with plasticizer and Chemical cementations based plasticized grout admixture cement bag through nipple and closing ends nipple epoxy putty/silica jelly after injecting the chemicals mixed with cement slurry complete all as specified and directed by engineer in charge.
M&L for providing 10 mm thick one component chloride free thixotropic fibre reinforced polymer modified repair mortar with alkali resistant synthetic fibres for exceptional resistance cracking complies ASTMC 109 with flexural strength ASTM C 348 @ 7 days meeting 7N/mm2, tensile strength @ 7days (ASTM C 307)> 3 N/mm2, compressive strength of 35Mpa at 7 day and 45Mpa at 28 days, Adhesion bond strength > 2 N/mm2 ,Creep Strain Reduction - 10% at the outer or inner RCC surface mixed with styrene butydiene polymerized cement mortar modifier not less than 6% by weight or 1.8 ltrs per 30 kg bag of thixotropic fibre reinforced polymer modified repair mortar .cement and sand can be used for finishing purpose. It should be specially adhered to BS 6319 having specific gravity of 1.025 to 1.04, minimum 43% solid contents complete all as specified and as directed.
M&L for drilling holes at the location of cracks upto a depth of 75 -100 mm and a dia of almost 14-20 mm and cleaning those holes prior to application. nipples should be fixed in these holes which are to spaced at 1m c/c. A high strength polymer based on BPA and having viscosity less than 200 cps at 25°C and a 7 days compressive strength of minimum 70 MPa.complete all specified and directed by Engineer-in-charge.
M&L for Perforation in RC using twist & rotating mechanical cutting tool for Fastening to concrete for chemical anchoring having a Rapid strength gain, Vibration resistant, Corrosion resistant of reinforcement on existing RC Component with Hilti HIT-HY70 BS 5080 or equivalent as approved by GE, typically attains a compressive strength in excess of 20N/sqmm @ 3 hours and an ultimate compressive strength of 70N/sqmm in 7 days as per BS 6319 Part 2 : 1983, maximum hole depth 75mm, steel bar 12mm dia and drill bit size14mm with polyster resin based anchoring material for H/V/Large annular applications or post installed bars or in accordance with bar thickness complete all as specified and directed by Engr-in-charge.
M&L for providing adequate moisture, temperature and time to allow the surface to achieve the desired properties for its intended use by using polyamine cured epoxy coating , wax based compound in which liquid substance that is added as a surface coating on repaired concrete surface. It forms a continuous membrane that controls hydration for strong and durable concrete .It should have specific gravity of 1.02 These compounds shall be used to reduce the loss of water or heat in order to create ideal conditions that are favourable to the increase in the strength of concrete complies with the internationally recognised ASTM C309-90 standards typically within the range of 200 to 285 ml/sqm, SG - 1.02 including all tools and tackles. complete all as specified and directed by Engr-in- charge.
M&L for applying 2 coats of two component solvent free , moisture insenstive epoxy resin coating it should achieve Compressive Strength of >70 MPa after 14days, having pot life Pot life, minutes at 27⁰C, 100 g >40 mass.The product shall have a minimum pot life of 120 Min at 35°C and an open time of atleast 4-6 Hours @ 30°C.It shall develop a minimum compressive strength of 40 MPa and a bond Strength of 11 MPa.Before applying coating surface should be cleaned from dirt, fungus and all foreign material complete all as specified and directed by Engr-in-charge.
M&L for applying 20mm shear thinning fibre reinforced polymer modified , impermeable to aggressive elements, dual shrinkage compensated, cementitious repair mortar with alkali resistant synthetic fibres for exceptional resistance cracking complies ASTM C 109 with flexural strength ASTM C 348 @ 7 days meeting 7N/sqmm, tensile strength @ 7days (ASTM C 307)> 3 N/sqmm, compressive strength of 35MPa at 7 day and 45MPa at 28 days, at the outer or inner RCC mixed with hydrolysis resistant primer cement modifier,not less than 6% of weight or 1.8 ltrs per 30 kg bag of shear thinning fibre reinforced polymer modified mortar. which provides excellent bond to concrete, Improves tensile and flexural properties of mortar, Versatile having specific gravity of 1.02 cement sand can be used for finishing purpose it can be applied on external or internal surface of any brick or stone wall or concrete surface, etc. complete all as specified and directed by Engr-in-charge.
M&L for applying 3 coats of elastoplastic Coating modified with special additives and ready to use. Mixed with water, it cures forming a coating, with limited thickness which resists the penetration of water to achieve compressive strength of 36 N/mm in 3 days, adhesion bond strength of 8.2 N/mm. It should have elongation at break of more than 125% (ASTM D 412), tensile strength of more than 4 MPa (ASTM D 412), passing DIN 1048. complies to ASTM D4541 ASTM C836, DIN 1.048p 5 ASTC D412 having , Cleaning, mixing using slow speed electric drill and application of 3 coats complete all as specified and directed by Engineer-in-Charge.
M&L for applying 2 coats of passivating protective matrix anti-corrosive cementitious protective coatings on steel forming a continuous film not less than 1000 micron of Single component for steel reinforcements/steel ,Mixed density : 2.01-2.05 Pot life : 30 minutes@30 C Touch dry time : 10-15 minutes @ 30 C Adhesion bond strength : 1 N/mm and preparing the surface to receive the cementitious repair mortars in appropriate proportion (as per manufacturer's instructions) complete all as specified and directed by Engr-in-charge.
M&L on dilapidated girders or reinforcement encased in concrete for providing and applying alkaline based Anti-oxidizing compound for steel structure confirming to ASTM D 1748-10(2015) after cleaning loose scale or oxidized chips from bars .The material to be applied on the rusted metal using brush. Allow it to react for 16 to 24 hrs, pH Value : Alkaline (9.5 - 10) and afterwards wire brushing the surface. Clean with dry cloth before application of protective coating etc. complete all as specified and directed by Engr-in-charge.
M&L for applying 20 mm screed with portland cement based structural polymer mortar compound to produce a thixotropic mortar .It should me physically and chemically compatible with the host concrete..The product should be mixed with Styrene Butadiene Rubber Based Bonding Agent Cement Modifier ,not less than 6% of weight or 1.8 ltrs per 30 kg bag. It shall achieve a compressive strength of 11 MPa in 1 day & 30 MPa in 28 days and a minimum flexural strength of 6 MPa @ 7 days. It shall have a tensile strength of minimum 2 MPa mixed density shall be 2.18 kg/ltr, flexural strength shall be 6 MPa for 7 days and tensile strength for 7 days shall be more than 2MPa.Its adhesion bond strength shall be greater than 2 MPa with creep strain reduction of 8%. The modulus of elasticity of this product shall be 23-26 KN/mm². cement and sand can be used for finishing purpose.It shall have a minimum bond strength of 2 MPa Delaminated, weak, damaged and deteriorated concrete and where necessary sound concrete shall be removed by suitable mechanical or very high pressure waterblasting techniques (up to 110 MPa) Thickness of the individual layer upto 20MM complete all as specified and directed by Engr-in-charge.
M&L for providing and fixing welded MS wire mesh weighing not less than 1Kg/Sqm of size 50mmX50mm of 2.6mm dia on the prepared surface & surface should be cleaned and be removed from dirt, fungus and all foreign material complete all as specified and directed by Engineer in Charge.
M&L for applying 3 coats of single component cementious water proofing membrane for holding the quality of negative hydrostatic pressure on new/old prepared surface, elasticity moduus at 28 days shall be 14000-16000 N/sqmm, adhesion to substrate at 1 day - 0.6N/sqmm and at 28 days - 1.3 N/sqmm , compressive strength at 1 day - 12N/mm2 and at 28 days -36N/mm2, flexural strength at 1 day - 3.6 N/Sqmm and at 28 days - 8.2N/Sqmm, Coating to be applied after proper surface preparation to remove loose dust, dirt etc. cleaning and mixing by using slow speed electric drill complete all as specified and directed by Engr-in- charge.
M&L for removing of existing loose material and complete surface preparation by scarifying the surface. Filling of voids and undaltions with single component thixotropic fibre reinforced polymer modified mortar to achieve compressive strengths of 15 Mpa in 1 day, 25MPa in 3 days and 45 MPA in 28 days, adhesion bond strength of>2MPa, giving creep strain reduction of 10%, modulus of elasticity of 25-28 MPa, shall have water-powder ratio of 0.16,finished to obtain surface even and smooth, complete all as specified and directed by Engr-in- charge.
M&L for preparation of the surfaces and scrubbing the cured membrane with emery paper and removing all the traces before applying exposed concrete or masonry surface i.e.cleaning as directed to remove loose rust/scales/corrosion from reinforcement bars etc.& provision of application of Water based acrylic polymer primer cum sealer coating having Specific Gravity 1.00 0.02 , Touch Dry @ 30 C 1-2 hours, Minimum application 30 C. on prepared surfaces having high performance copolymer emulsion, formulated to achieve specific performance characteristics that shall dry to a transparent finish and supplied as a single component white liquid to exposed concrete or masonry surface after proper preparation surfaces,i.e.cleaning of dust,dirt etc. The system shall form a film and shall have excellent water retention after film formation. complete as per Manufacturere's instructions and all as specified and directed by Engineer in Charge
M&L for form work to sides and soffits of lintels, beams, columns, shelves, chajjas including overhangs etc for fair finished flat surface, complete all as specified and directed by Engr-in-charge
M&L for removing old existing rubbish/battered/useless mixture of the binding materials such as cement / Lime and fine aggregate (<4.5mm retained on IS Sieve), loose/unsound weaken mixture of binding materials such as cement / Lime and coarse Aggregate (>4.5mm retained on IS Sieve), fine Aggregate of any description and in any position from existing external/internal surfaces of RCC components or any surface having average profundity of 15mm (Approx height 10m from natural ground level) by hand tool that has a long metal blade with a sharp edge at the end, chisel and hammer or using robust pneumatic chisel hand tools and removal beyond MoD land including cutting of all edges, making square shoulders of the aperture, coarsen the smooth surfaces, curettage /removing of all deterioted/decayed loose surface.complete all as specified and directed by Engr-in-charge.
M&L for providing and applying 2 coats of coating on surface, it shall be liquid applied highly durable waterproof coating system for surface , based on high quality acrylic emulsion, functional filler, sunlight stable pigment and quality fungicides. It shall have properties that provide features like crack bridging ability, breathability, flexibility & exterior durability and resists micro-organism growth.It shall cover hairline cracks up to 0.5 mm effectively. It shall have excellent crack bridging ability and shall bridge cracks up to 2 mm width. The elongation at break is approx. 220 %. The tensile strength is 0.7 Mpa. It has a hardness shore ‘A’ scale of 80, with an adhesion strength of 3.4 Mpa. The coating is UV resistant, algae and fungus resistant, and has a water vapor permeability of 40 gm/m²/day and a crack bridging ability of 1-2 mm. The coating must be applied with temperature above 5°C and below 45°C. The coating shall be applied in two coats of by roller or brush application at the interval of 4-6 hours.Allow applied coating to dry or cure for 7 days. complete all specified and directed by Engineer-in-charge.
M&L for treating the existing pipe penetrations using non-shrink, free flowing, cementitious grout .The compressive strength of the grout must exceed 50 N/mm2 at 7 days and 60 N/mm2 at 28 days. The flexural strength of grout must exceed 9N/mm2 @ 28 days. Fresh wet density of the mixed grout must exceed 2150 kg/m3. Further flashing the area using solvent based UV resistant polyurethane based waterproofing material having minimum tensile strength on 4 N/mm2 and minimum elongation of 800%. Complete all as specified and directed by Engineer-in-charge.
M&L for applying one coat of mixture of two monomer unsaturated liquid hydrocarbon , gaseous hydrocarbon and polymesrized them to get the high polymer dispersion emulsion successfully bonded to mortar, to improve adhesion to concrete, better durability, reduced shrinkage and increased flexibility and resistant to emulsification in damp condition modified Ensuring no porosity in new/old surface, temperatures between +5°C and +35°C, Resist to penetration of CO2 4.600 micron , compressive strength (11.5 N/mm2) at 3days strength - 11.5 (N/sqmm ) and at 28 days - 25.30N/sqmm complete all as specified and directed by Engr-in-charge.
M&L for providing and applying corrosion resistance non-shrink free flow, cementitious one component Micro-Concrete with average thickness 50 mm using having compressive strength (BS 4551-80-60) MPA at 28 days, Tensile strength (ASTM C 348)-2.0 N/mm² @ 28 days, Flexural strength (ASTM C 348)-9 epoxy bonding agent having mix density of 1.45 to 1.5 dg/ltr , compressive strength (BS-6319 PT 3)-25 Mpa at 7 days bond strength (ASTM C 881)-11 N/mm at 7 days having an over lay time ov 3 hrs at 30°cpouring of micro concrete into the formwork using suitable arrangement or if required using pumping device for and the bottom shuttering after 7 days ensuring proper bond between the micro concrete and existing concrete substrate etc including all tools and tackles as per accepting officer Note : Minimum thickness to be used is 50mm with addition of 10mm down aggregates of 25% of the weight of mix ready to use powder with water- powder ratio of 0.18. Strength of 1 day to be 20N/mm2. Time of expansion to start after 20min of mixing and finish in 120 min of mixing Epoxy bonding agent having mix density of 1.45 to 1.5 kg/ltr, compressive strength (BS-6319 PT 3)-25 Mpa at 7 days & bond strength (ASTM C 881)-11 N/mm2 at 7 days, having an over lay time of 3 hrs at 30°C. , complete all specified and directed by Engr-in-Charge.
M&L for applying Polyster Resin based Anchoring material in concrete before fixing nozzle it should typically attains a compressive strength in excess of 20N/mm @ 3 hours and and ultimate compressive strength of 70N/mm in 7 days (50mm x 50mm x 50mm)when tested as per BS 6319 Part 2 : 1983. complete all as specified and directed by Engr-in-charge.
M&L for MS TMT bars 12 mm dia and over as in reinforcement cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends & binding with and including MS annealed wire not less than 0.9 mm dia complete all as specified and directed by Engineer in Charge.
Note: (a) The work for item Sr No. 1 to 25 to shall be executed directly by company or their authorized applicator. Application shall be authorized in writing by company and guarantee/responsibility of work executed shall be owned by company in writing. (b) Quoted rate shall be inclusive of material all labors tools and plants scaffolding and working upto 15 mtr height. (c) Adoption of necessary safety arrangement like safety belts. ropes. helmets, netting etc. which are required for safety of working at height etc. which are required for safety of working at height exceeding 3 to 25 mtr height shall be mandatary and deemed to be inclusive on quoted rates.
IDEAL CONSTRUCTION COMPANY
RAMESH ENTERPRISES
ASHOK CONSTRUCTION
SHREE JAGDISH FURNITURE CO.
NIHAL ENTERPRISES
M/s Raghav Traders
RAVINDRA SALES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .