Provn of Car parking shed for offrs in Vijay Bhavan of Emb HQ, Acoustic wall panelling of trg hall for student offrs/JCOs/NCOs of CAT A Est of IA at Pet Tech and instln Wg, Det ASC Centre and Collage and other 03 (Three) Revenue works under GE (W) Co

Amount

Excavation for post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm in hard/dense soil all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) all as specified and directed.

S&F structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and directed.

Use & waste special water tight centering and shuttering including bolting, strutting, propping so as to with stand a pressure of 0.1 Mpa including removal of form work all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies all as specified and directed.

M&L PCC 1:2:4, type B-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete all as specified and directed.

M&L PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in flooring and other similar works all as specified & directed.

M&L heavy duty external floor tiles of 15-20 mm thick of size 600x600 mm of matt finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified & as directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work, finished surfaces even & smooth (without using extra cement) all as specified and directed.

Excavation in trenches n exc 1.50 m wide and nexc 1.50m in depth and getting out in hard/ dense soil all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for Concrete bed to drain pipes 200 mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested Note :- (i) Thickness of bed below the barrel of pipes: 15cm for pipes 200mm dia and over. (ii) Width of bed: Outer diameter of drain pipes (not of sockets/collars) plus 30 cm (iii) The rates include for any necessary shuttering and supports to concrete and for laying beds to falls.

M&L for 200 mm bore (internal dia of pipe) reinforced concrete pipes, Class NP3 laid in trenches and jointed in CM (1:1) all as specified and directed.

Removing excavated (soil) materials and deposited out side of MD land up to a distance of 15 km all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm all as specified and directed.

M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F joist, channel, angle, or tee sections, or MS Flats fixed independantly without connecting plates, etc. Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados, etc. laid, bedded and pointed in any mortar and removal of rubbish off the site out side MD land all as specified & directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced all as specified and directed.

M&L for crushed sand filling under precast interlocking paver blocks and all other similar works all as specified and directed.

M&L rubber moulded glossy finished precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 80 mm thickness, M-40 Grade (Heavy duty) laid over sand cushning including compaction of paver blocks using surface vibrator all as specified and directed. Note :- Sand cushioning shall be paid separately under relevant item.

M&L for preparetion of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm laid over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surface all as specified and directed.

M&L for providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with & including Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long for any sunk or raised moulding all as specified & directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water and removing debris outside MD land (from ground floor to fourth storeys bldgs) including use of scaffoldings all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified and directed.

M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2mm thick (average) wall putty all as specified and directed.

M&L 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finished surfaces fair and even without using extra cement all as specified and directed.

M&L for preparation of new surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2 mm thick (average) wall putty all as specified and directed.

M&L HDF laminated wooden flooring tiles of size 1215mm x196mm x 8.3mm thick medium emboss anti bacterial and moisture resistant laid over and including foam sheet all as per manufacturers instructions all as specified and directed.

M&L 10-12 mm thick eco perforated acoustic panels decorative ceiling/wall panelling of size exc 0.5 sqm and n exc 1.00 sqm with suitable frame and including scaffolding upto required height all as specified and directed by Engr-in-Charge. Note: colour and design will be finilazied by GE/Engr-in-Charge.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match light/dark Shade/Double charged/ultracharged all as specified and directed by Engr-in-Charge.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the coloured tiles all as specified and directed by Engr-in-Charge.

M&L Glazed ceramic tiles in vertical surfaces 350x 250x7mm/ 450X 350X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the coloured tiles all as specified and directed by Engr-in-Charge.

M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint laid over 2mm thick (average) wall putty all as specified and directed.

S&F 12 mm thick plain toughened glass in doors/ windows framing doors handle, suitable hinges, rubber beading, floor spiring and all necessary fittings all as specified and directed.

Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins (each line wire to be measured) all as specified and directed.

S&F Concertina coil with punched tape of 600mm dia centre core wire shall be minimum 2.5mm dia of mild steel wire confirming to IS 280-2006. Galvanised coating of steel concertina coil shall confirm to the requirements as laid down for medium coated wire in IS 4826 "Hot dipped galvanised coating of round steel wires" concertina coil shall be fixed in dimond shape with the help of dovetail to handle and spikes shall be fixed at both ends of coil, minimum straight length of the wire 150 RM of 10 RM of wire, minimum weight 13.5 Kg for 10RM of work i.e 90 gm/RM of wire all as specified and directed.

S&F PVC coated chain link fencing wire gauge 4 mm dia and wire thickness 4 mm including line wire and mesh size type of standard staining bolts of size 75x75mm including taking down old fence of any type and any size all as specified and directed.

S&F Mild steel bolts of neck dia exc 12mm and n exc 20mm, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long all as specified and directed.

M&L for taking down and refixing of interlocking tiles including prepration of sub base and also including 25mm thick (compacted) sand cushioning including watering and ramming and joints filled with sand all as specified and directed.

M&L MS Framed work (Fe-410-W of grade E-250 quality A) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing all as specified and directed

M&L RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed.

M&L RCC columns, pillars, piers, posts and struts, type B1, 1:2:4 (using 20mm graded crushed stone aggregates) all as specified and directed.

Mild steel TMT bars 8 mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and dircted.

M&L 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing all as specified and directed.

Unitech Enterprises (BID ID -3241039)

SAHI SAGAR ENTERPRISES (BID ID -3241761)

Shivam Enterprises (BID ID -3244479)

SAHU AND SAHU CO. (BID ID -3244892)

Nilesh Construction (BID ID -3243999)

GANGAJAL (BID ID -3242516)

Shetty Construction Co (BID ID -3242738)

Bidder Name

Unitech Enterprises

Nilesh Construction

Shetty Construction Co

SAHU AND SAHU CO.

GANGAJAL

Shivam Enterprises

SAHI SAGAR ENTERPRISES

N F ENTERPRISES