Electrical Installation work

Amount

Dismantling the existing all damage wiring as per instruction of EIC,incl SPNDB,TPNDB,fittings fixture as per reqd and kept it safe custody including lesscost for dismental material.

Supply & fixing 415 Volt VTPN 6 way with SS enclosure (125MCCB incommer) double door with IP-42/43 protection with 63 amp.TPMCB-6 ('C' Curve, 10 KA) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size Cu. wire and neutral link & provision for earthing attachment as to G.S. (Siemens / Legrand as per approved by E.I.C.).(for Lab)

Supply & fixing 415 Volt 16 - 32 amp per way 8 way TPN MCB DB with SS enclosure (legrand) double door with IP-42/43 protection with 63 amp. 4 pole Isolater as incomer and 12 Nos. 16 A to 32A SP MCB ('C' Curve, 10 KA) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size Cu. wire and neutral link & provision for earthing attachment as to G.S. (Siemens / Legrand as per approved by E.I.C.). for Lab & lighting and AC

Supply, Installation, testing & Commissioning of Floor Mounted Cubical type, Front & back opened, Compartmentalised LT Panel made by 5mm CRCA Sheet With powder coated paint, cable alley with connector at both side, hinged type door arrangement at front & back side with interconnection by suitable size copper wire as per direction of EIC comprising the following :- make-L&T/ABB/seimens as per EIC (i) 415V, 400A, TPN,SFU - 1 No.

S & Laying4.X70 sq. mm. PVC/A, Al. Cable ( through underground trench follows Govt schedule F2-1(b)

S & Laying 4X25 sq. mm. PVC/A, Al. Cable ( through ms shaddle on wall F2-1(b)

Supply & fixing 250 Volt 6 - 10 amp. 2 + 12 way SPN MCB DB with SS enclosure (8GB0208) with IP-42/43 protection with 40 amp. DP Isolater as incomer and 10 Nos. SP MCB ('C' Curve, 10 KA) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size Cu. wire and neutral link & provision for earthing attachment as to G.S. (Siemens / Legrand as per approved by E.I.C.).

Distn. Wiring in 22 / 0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex / Havells / KEI) in 20 mm dia rigid pipe conduit FR presion make , with 1x22/0.3 single core stranded FR pvc insulated & unshethed copper wire complete with all accessories embeded in wall to light / fan / call bell points

with suitable size piano key type swtich fixed on MS CRC sheet metal (16SWG) switch board cum JB on wall complete with2 no suitable Ph&N copper bar incl. bakelite wall matching colour top cover 3 mm thick and incl 175x100x65mm IB making earthing attach painting the MS box and mending good the damages to original finish. a) 2x22/0.3 (Ph. & N) & 1x22/0.3 as ECC.

i) Average Run 8 Mtrs.

Distn. Wiring in 22 / 0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex / Havells / KEI) in 20 mm dia rigid pipe conduit FR presion make , with 1x22/0.3 single core stranded FR pvc insulated & unshethed copper wire complete with all accessories embeded in wall to light/ fan/ call bell points

with suitable size piano key type swtich fixed on MS CRC sheet metal (16SWG) switch board cum JB on wall complete with2 no suitable Ph&N copper bar incl. bakelite wall matching colour top cover 3 mm thick and incl 175x100x65mm IB making earthing attach painting the MS box and mending good the damages to original finish. a)2x22/0.3 (Ph. & N) & 1x22/0.3 as ECC.

i) Average Run 10 Mtrs.

a) On Board Plug.

S/F 250 volt. A.C/D.C Superior type call bell (Anchor-8320) on H.W. Board incl. S/F H.W board.

S & F 250 Volt. 2 x 6 amp 5 Pin piano type plug socket (Legrand or equivalent make as per choice of EIC) with 2 x 6 amp piano type switch, without plug top on 175x100x65 MS 16SWG switch board and bakelite /perfex cover of 3mm thick by brass screws after making housing for switch by curring bakelite / perfex cover and making necy connection reqd.

S & F 250 Volt. 4 nos 20 amp 3 Pin piano type plug socket (Legrand or equivalent make as per choice of EIC) anchor with4 nos 20 amp piano type switch, without plug top on300x200x65mm MS 65SWG switch board and bakelite / perfex cover of 3mm thick by brass screws after making housing for switch by curring bakelite / perfex cover and making necy connection reqd.

S & F 250 Volt. 20 amp 3 Pin piano type plug socket (Legrand or equivalent make as per choice of EIC) anchor with 20 amp piano type switch, without plug top on150x100x65mm MS 16SWG switch board and bakelite / perfex cover of 3mm thick by brass screws after making housing for switch by curring bakelite / perfex cover and making necy connection reqd.

S & F 250 Volt. 20 amp 3 Pin INDUSTRIAL SWITCH & SOCKET type plug socket bakelite / perfex cover and making necy connection reqd.

S & F 250 Volt. 2.15mfd capacitor in place of existing one.

S/F M.S. Fan Clamp of two piece type for R.C. Ceilling as per approved specification, fabricated from 40 x 9 mm M.S Flat incl. making good damages to building roof with satisfactory finishing and painting as to G.S.

Supply & delivery 250 volt. 56" (1400 mm) sweep A.C. Ceiling fan complete with all accessories (without regulator) (Orient P.S.P.O, Summer king / Usha Striker, Colour approved by E.I.C)

Fixing of 250 volt. A.C. Ceiling fan complete with all accessories incl. S & F connecting wire for down rod up to 30 cm incl. painting the rod with approved paint and making necy. Connection as required by 2 x 1.5 sq.mm flexible copper wire.

S & F of 12" sweep A.C. single phase heavy duty exhaust fan complete set ready to use incl. cutting holes and making necy. connection incl. S & F louver shuter as per G.S. (E.P.C Electrical Pvt. Ltd.)

S / Delivery 250 volt. 4 Ft. Long 20 Watt LED Single / Double luminaries complete with all accessories incl. S & F 20 watt LED tube (Philips Make) or equialent.

i) TMC 501 P 1 X T - LED with MAS LED tube 1200MM - 2100 lm

ii) TMC 501 P 2 X T - LED with MAS LED tube 1200MM - 2100 lm

S & F Fully diffused recessed mounted 2’ X 2’ 40W LED luminaire with minimum lumen output 4200lm / cat RC380B LED 42S – 650 – G4 L60 W60 PSU OD (Make – Philips / Bajaj / Wipro).

Fixing only Single / Twin LED Tube fittings complete with Tube lamp directly on wall / ceiling with U type M.S clamp and suitable size M.S fastener, nipple etc. as reqd. as to G.S.

S/F 250Volt ,10watt Led balb in vacany holder. (Philips / bajaj)

S & Drawing 1.1 KV grade single core stranded 'FR' PVC insulated unshethed Cu. Wire (Finolex / Havells / KEI) in casing-capping (pression) in 20/25mm and making necy. connection as required.

i) 3 x 1.5 Sq. mm.

ii) 2 x 2.5 Sq. mm. + 1 x 1.5 Sq. mm.

iii) 2 x 6 Sq. mm. + 1 x 4 Sq. mm.

iv) 4 x 10 Sq. mm. + 2 x 6 Sq. mm.

S/F PVC rigid conduit pipe FR pression on wall ceiling with saddles and others accessories as reqd and mending good damages to building wors for 20MM dia

Earthing the installation with 50 mm dia 3 mm long G.I. (ISI - M) pipe as to G.S.

S & F earth busbar of 25 x 6 mm M.S. Flat on wall as to G.S.

Loop earthing by G.I. wire from busbar to equipments as to G.S.

a) 4 SWG G.I. Wire

OCTAGONAL POLE FOR PATH LIGHTING. Supply and installation of 7 Mtr GI Octagonal Pole as per dimension-Top dia -70 mm, Bottom Dia - 130 mm, Section-1 (Section Length - 7000 mm) Thick-3mm.Base Plate - 225 mm x 225 mm x 16 mm, PCD - 225 mm, FOUNDATION ACCESSORIES - Foundation Bolt- M20 x 700 mm.(4Nos.), Sword Type Single Arm Bracket 1500 mm Long, templates and Foundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1400 mm with 8 nos. 12mm dia.

tor bars as main bars and 8mm dia. tor bars stirrups @ 190 mm c/c as per approved drawing. This reinforcement shall conform to IS:1786 latest edition. The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing. Excavation, RCC and reinforcement shall have to be as per direction of EIC.

The pole should have in built 2 pole and earth terminal for power distribution arrangment. (Material for Pole Shaft- As per BSEN 10025 / IS 5986 Grade or Equivalent / Material for Base Plate - As per IS 2062 Grade - Fe 410 / Metal protection - Hot Dip Galvanisation as per IS 4759 or equivalent) (Make: Utkorsh / Bansal / Skipper / Bajaj / Surya / CG)

Eraction of 7 mtr long 100mm dia ERW pipe class-B by S & providing M.S. Plate incl necy arng near base plate for smooth cbale entry position and making C.C muffing of size 450 x 450 x 600mm height with cement morter mixture (6:3:1) incl neat cement finish before cheaping properly the existing roof incl S& providing earth bolt after drilling hole etc as per EIC

S&F jacket single arm header assembly having 100mm dia top cap of 0.30mtr long duly welded with 1.5mtr long 40mm dia pipe arm brackey detachable type at an angle 110degree with the pole incl painting with 2 coats of synthetic enamel paint over a cost of R.O primer as to GS

S & F 230V, 140-160W LED Street light with aluminum die cast housing having at least IP66 protection with individual optics of LED Colour (warm white) - CDL minimum lumen out put 135 lumen / watt on existing pole arm. [Make - Philips - BRP 360 LED 155Watt 300K WW / Jaquar or equivalent make].

Supplying of one number 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable (Armoured) conforming to IS: 7098 / 1988 with its latest amendment of following size. [Make Nicco / Fort Gloster] (a) 2x10sq.mm

Laying of one No. cable above in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :2 Core10 Sq. mm

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc.and making connection to switch, BDB and BBC etc.(a) 2 Core10 Sq. mm

S & L of 1.1 KV grade 3 X 1.5 Sq mm FR single core multi stranded copper wire for connection from loop box to fittings through 13 mm dia polythene pipe.

Finishing of the PVC insulated wire(3 X 1.5sqmm) ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

S & F of medium gauge G.I pipe (ISI medium) having the following diameter [32 mm Diameter] for protection of cable with necessary fitting and jointing materials as required.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed as below (ISI medium G.I pipe)

SITC OF LIGHTNING PROTECTION SYSTEM

S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1)

Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet / Roof / Wall with GI Saddles1100 mm apart incl. mending good the damages to building works

Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart including mending good damages to building work

Making soldered joints between conductor / down pipes / other metallic objects by 7/10 stranded GI (Hot Dip) wire incl. Supply of jointing materials & Painting with 2 (two) coatr of Bituminous paint.

Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS [For Soft Soil]

Earthing with 50 mm dia GI pipe (ISI Medium) 3.64 mm thick x 3.04 Mts long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Extra for treatment of soil by using salt & charcoal or coke for plate / pipe electrode .

Providing and laying G.I. tape / strip 32 mm X 6 mm from earth electrode directly in ground as required.

Glow Sign Board

S & D of Glow sign board (size 20ft x 6ft ) fabricated with 40mmx40mmx60mm M.S. angle and 32mm x 6mm M.S. flat as structure with making arrangement for hinged type door with locking system made with M.S angle incl. provision for fixing the poly carbonate sheet facia approved colour (3mm thick) with computerized lettering in royal blue back ground,

white lettering (as per given specified format) rigidly fixed on angle frame and 40mm x 40mm al. angle channel with nut bolts washers etc. as border of the facia. Bake side incl. rest four side of the board cover with F.L. fitting required nos. incl. making arrangement for fixing the board incl. painting the inside of the board of shanthetic enameled white color paint as per direction of E.I.C.

S/F 240 volt 22 watt F.L. fittings Complete with all accessories incl. LED. Tube (Philips TMC501 PIT LED 22W P3241 22W p3241 Essential LED Tube 1200mm) on Glowsign board on M.S. angle by necy. Screws etc with lamp.

Fixing the glowsign board frame at roof at the building incl. S & F 4 No. Tie rod (40 x 40x 6mm) of length 760mm from glow sign board to roof of the building with S & F 2 Nos. triangular support (size 5.5ft x 8ft) for rigidly fixed the board incl. mending good damages.

Providing CC (6:3:1) muffing 600 x 600x 760 mm in size or equivalent size of cylindrical muffing above ground level around the tie rod base complete with 3 mm thick neatly finished cement plaster all round.

Supply and delivery of 1.1 KV grade of following PVC unarmored Al cable as per G.S. (Havells / POLYCAB) a. 2 core 10 sq.mm.

Laying of cable 2 core 10 sq.mm on wall / surface incl. S & F MS saddles Wire, making holes etc. as necy. mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber for dust & moisture-proof entry of XLPE/PVC armoured cables as a. 2 core 10 sq.mm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. a. 2 core 10 sq.mm

S/F 200x150x100 mm C.I. water proof looping cable box comprising 1 no. 250V, kitkat fuse unit etc. one no. brass cable gland, rubber gasketed C.I. top cover, earth terminal and the box will be fixed on S.T. pole with necessary pole clamp, nuts-bolts etc. as required as per G.S.

SEN ELECTRIC

M/S DUTTAROY TRADERS