Providing and Fixing of Green Gym and playing Equipments at Municipality Area at Bhinmal

Amount

Providing and installation of 16 in one 01 Chest Press 02 Shoulder Shaper 03 Leg Press 04 Sit Up Board 05 Pull Up Bar 06 Hip Twister 07 Flying Pull Up Bar 08 Pull Up Station 09 Vertical Ladder 10 Horizontal Ladder 11 Static Monkey Bar 12 Ninja Ring 13 Step Up 14 Leg Lift 15 Dorsal Rose Station 16 Multi User Frame AREA : 21’ x 20’ feet Total Height : 10 Feet. Vertical Pole : 100mm ID Horizontal Pole : 40mm ID Loops : 20mm ID Curve / Bending Loop: 25mm ID Combinations made from “B” Class GI Pipe. The Octagonal Structure is Made up of 100 NB “B” Class GI Pipe. Round Plate of 250mm dia & 10mm Thick is Welded at Bottom of Octagonal Structure. The Links Are Made Up 25mm NB “B” Class GI Pipe. The Handle & Seat Frame of Chest Press is Made Up From 32mm NB “B” GI Pipe. For Assembly Difrent Bushes are Used wich is made from seamless pipe of 50mm OD & 5mm thick & 50mm solid bar is used. The seats and back rest are fitted on the outer frames are made up of M.S. sheet of size 330mm X 300mm X 2mm thick and deep drawn and pressed in the tools and dies to have uniform radius of 20mm with no sharp edges. Chest press equipment made up of “B” Class G.I. pipe of different NB.NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters*The center pipe is of 80NB made up of “B” Class G.I. pipe.The bottom welded with support of M.S. round plate of 0250mm & 10mm thickness.The connecting pipes are made up from 25NB “B” Class G.I. pipe.The handle frame is made up from 32NB “B” Class G.I. pipe.To build structure bushes are used which are made from M.S. seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. Shoulder shaper is made up of 25 NB Galvanized pipe bend to form ring and spokes consists of 20 NB G.I. pipes the connect to each other of form a pair of wheels of FOREARM TWIRT. These wheels are mounted on both ends of 40 NB G.I. pipe bend with specially designed bearing housings and shaft assemblies. This bend pipe is fixed to main frame of 80 NB G.I pipe. Handle is fixed over the pipe ring for free movement of wheels. Leg press center frame is made up of 32mm NB “B” clas GI pipe. The leg press foot rest is made up of 25mm NB “B” class GI pipe. The pins used in are made up of 25mm diameter hardened low carbon steel material. Sit up Board Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The main frame is of 50mm NB made from “B” Class G.I. pipe supported with the MS round plate of Ø 250x10mm thickness. Fiber reinforced Plastic sheet of 3mm thickness is bounded on 25mm NB (G.I.) “B” class pipe of main frame. The base support of the sit up board is made 40NB (G.I.) “B” class pipe. The pull up bar is made up of 32mm NB “B” class pipe. 300 mm diameter x 10mm thick plate can be used for rotating seat of Hip Twister with 50mm NB “B” class GI pipe. Flying pull up bar is made up of 25mm NB “B” class GI pipe. Pull up station is made up of 25mm NB “B” class pipe. Vertical ladder is made up of 25mm NB “B” class GI pipe. Horizontal Lader is made up of 40mm NB “B” GI pipe. Static monkey Bar is made up of 40mm NB “B”B class GI pipe. Ninja ring is made up of 20mm NB “B” class GI pipe. Step up is made up of 25mm NB “B” class GI pipe. Leg Lft is made up of minimum 6 nos. 25NB spacer pipes Connected to paired 50NB Galvanized pipe arranged parallel at equidistance minimum 100mm. The paired handle pipe consists of 25NB galvanized pipe fixed at the top and bottom of 52NB support pipe. Dorsal Rose Station is made up of 40mm NB “B” class GI pipe. Multi user frame is made up of 40mm NB “B” class GI pipe. Closing caps made from high quality FRP material which is 2mm thick. The pins used are of “6203”, “6205” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from M.S. pre galvanized material. A17, A24, A34 circlips used for assembly. the footrest are made up from casted aluminum material having size 130mm x 310 x 5mm thick. With the support of 310mm x 130mm x 3mm thick MS plate. It has bolting provision for mounting or concrete slab. . All pipes Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60to70 micron thickness. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipment’s.all accessories should be fitted in M-30 concrete foundation as per direction of engineer incharge.

Providing and Fixing of FRP Standard Slide 10’: - Safe Play Area: -5 .2mtr. X 1.6mtr. Area – 4.2mtr. X 0.6 mtr. Height: -3.0 mtr. Its required area 4.2mtr. X 0.6 mtr. Platform height should be 1.5 mtr. From ground level and slide length 3. mtr. Slide should be made by Fiber Glass Reinforced Plastic having thickness 5mm overall. The back side of slide is surface mat with phantom effect. Connected with platform should be made by 16 SWG CRC sheet with FRP nonskid lamination. Leg support of the platform should be made by 48mm ODMS pipe 14 gauge. Ladder should be made by 32mm ODMS pipe. The ladders railing should be made up of 25mm ODMS pipe it is design in such a way that a ladder itself has safety railings for the platform. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipment’s. Slide should be made in a single mold piece there is no any joint in the slide. FRP components should be paint by 3 layers of PU paint. And install by C.C. base system as per order by engineer in charge.all accessories should be fitted in M-30 concrete foundation as per direction of engineer incharge.