CONSTRUCTION OF PUBLIC FACILITY BUILDING 2ND FLOOR AT COLLECTORATE CAMPUS, DISTT.-RAMPUR

R.C.C. work with cement approved coarse sand & 2 cms. Guage approved crushed stone grit in proportion of 1:1.5:3 in Beam windows and sunshades excluding supply of reinforncement and its bending but including its fixing & binding the same with 24 BWGGI binding wire & including necessary centering & shuttering etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. .UPPWD (SI. No. 285) SOR 2022

R.C.C. work with cement approved coarse sand & 2 cms. Guage approved crushed stone grit in proportion of 1:1.5:3 in Columan windows and sunshades excluding supply of reinforncement and its bending but including its fixing & binding the same with 24 BWGGI binding wire & including necessary centering & shuttering etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. .UPPWD (SI. No. 289) SOR 2022

Same as above item No. 4 but in super structure in 1:4 cement & coarse sand etc (SI. No. 305+ 310) PWD SOR 2022

R.C.C. work with cement approved coarse sand & 2 cms. Guage approved crushed stone grit in proportion of 1:1.5:3 in Slab windows and sunshades excluding supply of reinforncement and its bending but including its fixing & binding the same with 24 BWGGI binding wire & including necessary centering & shuttering etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. .UPPWD (SI. No. 284) SOR 2022

Mild Steel (Tor steel of plain) in plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel and its wastage, bend hooks and authorised overlapping shall be measured UPPWD (SI. No. 504) SOR 2022

Mild Steel or iron work of small sizes and section such as holding down bolts, hold fast, tie rods, grating etc.(when not included in an over all rates), wrought to required from including supply of steel boalts, nuts wastage etc. and fram including cost of hings, their fixing required for proper completion of he work. UPPWD (SI. No. 502)+ 502B) SOR 2022

12 mm thick plaster with 1:4 (one part cement and Four parts of Fine sand of 1.25 F.M.) over brick work minimum thickness not to be less than 1 cms. Including supply of material, labour, T&P etc. required for proper completion of the work. UPPWD (SI. No. 584) SOR 2022

Providing an laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm ×30cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @2% by weight & including S/o all material, labour, T&P etc complete for proper comletion of work. SOR 2022 New item No. 3

Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade but Red sand stone : DSR 7.29.1 /2021

Laying of 25mm thick KOTA stone of size 45X45cm and above flooring over previously prepared base with 2cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per the direction of Engineer-in-Charge including cutting polishing with wax polish including supply of all materials, labour and T&P etc. required for proper completion of the work.

Same as above but in dado with 20mm thick stone.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 Ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 KG / 10 Sqm) Item No. 13.46.1 DSR 2022

Distempering Two coat with oil bound distemper of approved brand and manufacture and required shade on and undecorated wall surface to with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British, Shalimar asian paint after throughtly brushing the surface free from including preparing the surface even and sand prepared smooth including cost of all materials.(SI No. 649 + 650) SOR/2022

Providing and fixing birla putty plaster of paris of 2mm thick over plastered surface to prepare the surface even and smooth complete Sh. No. 15 13.26 DSR 2022

Fixing Panes of 3.8 to 4.7 mm thick glass with equal or euivalent I.S.I. marked quality putty, brads and springs and including supply of all materials and labpur etc. complete. SI.No. New Item No. 3 (B) 2022

Supply of Fxing of flush doors commercial quality conforming to I.S. 2202 part 1 (1983) including fisingt of wooden cleats and stopers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied 35 mm thick. (SI No. 470(ii) SOR/2022

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. DSR 21.13/2024

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. DSR 9.84/2024

Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 150 mm DSR 9.87/2024

Add 5% For Electrical and Senetary Work