21/MWEEE-I/2021-22/TC/03

Amount

Wiring for light point /fan point /exhaust fan point /call ball point with 1.5sq.mm FRLS PVC installed copper conductor single core cable in surface / recessed PVC conduit, with piano type switch phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq.mm. FRLS PVC installed copper conductor single core cable etc as required. Group C

Rewiring for light point /fan point /exhaust fan point /call ball point with 1.5sq.mm FRLS PVC insulated copper conductor single core cableas earth wire in existing surface/recessed steel/ pvc conduit i/c dismentaling as reqd. etc as required. Group C

Supplying & fixing metal box of 180mm X 100mm X 60mm deep(nominal size) on surface or recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6pin 5/6 &15/16 amps socket outlet and piano type switch, connection painting etc. as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

-do- 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (A) 12 Way Double door

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Supplying and fixing 5amps,to 32 amps rating, 240 volts, "C" curve miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connection testing and commissioning etc, as required. (A) Single Pole

Supply and fixing following rating, double pole, 240 volt, isolator in the existing MCB DB complete with connection, testing and commissioning etc. as required. (A) 63 Amp.

Earthing with G.I. earth pipe 4.5 mtr long,40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

S/I/T/C of LED tube type luminaire 20 watt rating complete with extruded aluminium batten prewired with high efficient LEDs with the following : Total system wattage 20 watt +/- 5 % Luminous efficacy lumens/watt >=95 Power factor >=0.95

Supply and fixing of following piano type swich/ socket on the existing switch box/ cover including connection etc as required. 5/6amps switch

-do- 15/16 amps switch

-do- 3 pin 5/6 amps socket outlet

-do- 6 pin 15/16 amps socket outlet

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required

Supply of 15'(380mm)sweep 1400 rpm heavy duty Exaust Fan complete with ring, blade etc as required. ISI marked.

S.I.T.C. of 60 w LED street light fixture fitted with lense made of pressure die cast aluminium housing and Toughened glass cover comlete with following specifaction as reqd. Total system wattage = 60 watt +- 5 % Lumnairer efficacy >= 100 luman/watt Power Factor>= 0.95 protection Class- IP-66

Supply & fixing of 32 mm dia GI pipe (M Class) 1 Mtr. long bracket i/c wiring with 2.5 sqmm copper conductor wire as required.

Supply of PVC/XLPE insulated and PVC/XLPE Sheathed AL conductor armoured cable conforming to IS7098 (PART-I)/1976 as required. 3X6 sqmm

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1kv grade of following size above in the existing masonry open duct as required (A) upto 35 sqmm

Providing labour for repair and maintenance of E.I Fans etc for repair of defective lamp ,cable ,wiring ,switchgear/MCB box etc .by providing following labour-Wireman 1 Nos , in one shift on daily requirement basis per month ( for 11 Months )as per terms and condition of the department.