SPECIAL REPAIR ROOF OF ADMIN BLOCK, CHILLER PLANT ROOM AND GUARD POST AT CENTRAD UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10

Amount

Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition Mud in roofs, any thickness, including plastering, PCC pedding including sweeping clean and washing down with water to remove dust, etc complete all as specified and directed. (Note: Work to be executed in G+3 building).

Digging out plant roots from roof/wall, removing unserviceable material and cleaning site and making good disturbed portion in Cement Mortar 1:4 or cement concrete 1:2:4 type B1 as required complete all as specified and directed.

Demolition of PCC of any description and in any position complete all as specified and directed.

M&L for Cutting grooves in brick wall, Concrete 75 mm wide and 65mm deep and shaping horizontal face of grove with cement mortar 1:3 complete all as specified and directed.

M&L for providing plain cement concrete, type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in levelling course, roof kerbs, padding, coping , Gola, rounded or chamfered on edges complete all as specified and directed.

M&L for 20 mm thick rendering on concrete surface of roof with cement mortar 1:4 finished surface even and fair including mixing of water proofing compound @ 3% by weight of cement or as per manufacturers instruction complete all as specified and directed. (Note: Water proofing compound shall be measured and paid separately as 'Supply Only').

Supply only integral water proofing compound complete all as specified and directed.

M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.40 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 4 mm thickness of weight of 4.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps (overlaps to be thermo fused by flame) and applying one coat of hot blown bitumen 85/25 @ 0.70 Kg/Sqm all as directed.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Make- Somany/ Orient Bell/ Kajaria

M&L for Two coat of Aluminium paint over a coat of primer on APP membrance any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 brick surfaces of walls finished the surface fair and even without using extra cement complete all as specified and directed.

M&L Acrylic Smooth exterior paint of required shade : New work (Two coat) applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Taking up or down 40 or 50mm bore steel tubing and connections, including cleaning for refixing or removal to store.

S&F 50 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F 40 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down 25mm or 32 bore steel tubing and connections, including cleaning for refixing or removal to store.

S&F 32 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F 25 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store.

S&F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F plain 0.56 mm Aluminium sheeting , Alloy 31000 H4 in ridges, crumple joint hips, valley gutter, drip and straight flashing, in ridges, hips, valley, crumple joint, drip and straight flashings complete all as specified and directed by Engr-in-Charge.

Dismantling of PVC drain pipe any dia, jointed in cement mortar Socket etc complete all as specified.

S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 PVC (SWR) bends any radius Complete all as specified.

S&F in repair Stack clamps made out of 50 mm, 5 mm flat iron and 16mm dia round iron stays for 100mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F steel tubular trusses purlins, rafter vertical post and similar works including special shaped washer etc. complete using ERW or induction butt weled tubes including cleats, plates, MS flats complete conforming to IS 1161-1998 Gde st-240 complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, Chajja, wall etc complete all as specified and directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

M&L preparation of New steel surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over coat of primer complete all as specified and directed.

Dismantling water tanks exc 500 & not exc 1000 ltr capacity and removing to store.

S&F 1000 ltr capacity Rotational moulded polyethylene tripple layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in directed.

S&F 500 ltr capacity Rotational moulded polyethylene tripple layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in directed.

S&F in repair 40 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 32 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 25 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 20 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 40mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in repair 25mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

Demolition of RCC Roofs, floors, Slab(other than ground floors), beams, staircases, landing, tank plateform and similar suspended work complete all as specified and directed.

Disposal of building rubbish/malba/mud/similar unserviceable dismantled or waste materials by mechanical means including loading, transporting and unloading the same at C & D waste Management Site near Jahangir Puri Safai Karmchari Quarters including weighing at plant etc. Weighing and unloading at the plant shall be as per procedures/rules of the Plant Management . The rates are inclusive of all operations, labours, leads and lifts from site of work to the C & D Waste plant & processing fee of C & D waste management plant complete all as specified and directed.

S&F Solid PVC Wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame acomplete all as specified and directed.

S&F antibacterial SIGGMA 2.0 mm thick homogeneous flooring roll in width of 1.5mtr and continuous length of 20mtrs with PU guard and skirting in random pattern in approved design and shade of make as approved by Engr-in-Charge & GE, Installation and considering the wastage after cutting the rolls to fit the floor size and cutting the joints after overlapping for uniformity and further sealing the joints by thermal welding process on a smooth and moisture free levelled floor surface using rubber based adhesive (Fevicol SR 505 or make as per PS) complete all as specified & directed including as per the instruction of the Engr-in-Charge.

S & F powder coated aluminium anodised section 40 x 44mm x14 gauge for aluminium partition wall in wall in panel 1m x1m covered with 5mm thick plain/frosted tinted glass on top half portion and 5 mm thick Aluminium Composite panel fixed in half bottom portion complete all as specfied and directed.

S&F aluminium powder coated door frame with partially glazed shutters single/ double leaf divided into two glazed panels including aluminium anodised snap beading and rubber gasket/lining for fixing of glass as directed. The frame shall be fixed with aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter will be made out of the following section and fitting a) Aluminium anodised door frame 101.60 mm x 44.75 mmx2mm fixed with aluminium thrust bolt in walls by drilling as directed. b) Aluminium anodised sides rail of shutter section 83.5mmx 44.5mm x 2mm c) Aluminium anodised bottom rail of shutter section 150mm x 44.5 mm x2mm. d) Aluminium anodised top and middle rail of shutter section 100mm x 44.5 mm x 2mm. e) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leaf of Make Classic/Argent as approved. f) Aluminium anodised handle 250 mm long of approved Make Classic/Argent 02. No’s in each leaf. h) Glass Pane shall be 5.5 mm thick tinted glass.) 5 mm thick Aluminium Composite panel and lock including complete all as specified and directed.

M&L point wiring for modular switches with 2.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through and including concealed, rigid non-metallic PVC Conduit of minimum 20 mm dia or as per site requirement with all fittings, including cadmium plated screws as per IS, including 2.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for 15 Amps socket outlet on independent board complete all as specified and directed.

S&F Modular switch, flush button type, single pole, one way 15 Amps complete all as specified and directed.

S&F Modular socket outlet 2-in-1, 3 pin, 10 and 20 Amps, flush type complete all as specified and directed.

S&F modular white cover plate with frame, 6 module complete all as specified and directe.

S&F modular metal flush box, 6 modules complete all as specified and as directed.

S & F distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F MCB DP 240 Volts, 63 Amps complete all as specified and directed.

S & F MCB SP, 240 Volts, 32-40 Amps complete all as specified and directed.

Supply, installation, testing and commissioning of Bed head panels 3 feet Long for installation of outlets with provision for mounting necessary gas outlets. The bed head panel will be provided with cutout provision of electrical points . The panels will be made in extruded aluminium profiles with powder coating and will have cutout provision for gas outlets for fixing of electrical sockets 6/16 Amp - 6 Nos, cutout provision for nurse call system complete all as specified and directed. Make - MHS ( Modular Healthcare System) / Medline/ MPS/ Medrubb Industries

Supply, installation, testing and commissioning Oxygen Gas Outlets / Terminal Units BS Standard with stainless M steel probe for Oxygen complete all as specified and directed. Make - MHS (Modular Healthcare System)/ Medline/ MPS/ Medrubb Industries

Supply, installation, testing and commissioning Vaccum Gas Outlets / Terminal Units BS Standard with stainless steel probe for Vaccum complete all as specified and directed. Make - MHS (Modular Healthcare System)/ Medline/ MPS/ Medrubb Industries

Supply, installation, testing and commissioning Air Gas Outlets / Terminal Units BS Standard with stainless steel probe for Air complete all as specified and directed. Make - MHS (Modular Healthcare System)/ Medline/ MPS/ Medrubb Industries

Supply, installation, testing and commissioning Bed Head Panel Down Light complete all as specified and directed.

Supply, installation, testing and commissioning Main Display with 3x3 FND (3 digits X 3 displays), 20 call memory - Calls are stored from the 1st place (top left) - 2nd place (top right) - 3rd place (bottom right) ... from the 4th calls are hidden in order (till 47 calls). If the cancel button is pressed from Call Point, the responding call is deleted regardless of the order of the call If Cancel Only button is pressed, the 1st call is deleted, then the 2nd call display takes the place of the 1st call, the 3rd call display takes the place of the 2nd call and the hidden 4th call takes the place of the 3rd call complete all as specified and directed. Make - MHS (Modular Healthcare System)/ Medline/ MPS/ Medrubb Industries

Supply, installation, testing and commissioning Call / Cancel button (Transmitter) with curled (P) or straight (PS)n complete all as specified and directed. Make - MHS (Modular Healthcare System)/ Medline/ MPS/ Medrubb Industries

Supply, installation, testing and commissioning Call / Cancel button (Transmitter) with pull-string(1 m) complete all as specified and directed. Make - MHS (Modular Healthcare System)/ Medline/ MPS/ Medrubb Industries

Supply, installation, testing and commissioning Medical Grade Copper Pipe15mm outer dia complete all as specified and directed.

Supply, installation, testing and commissioning 12 MM Isolation Valve With Nut/ Nipple Adoptercomplete all as specified and directed. Make - MHS (Modular Healthcare System)/RN/RBI/ Medline

Supply, installation, testing and commissioning 15 MM Isolation Valve With Nut/ Nipple Adoptercomplete all as specified and directed. Make - MHS (Modular Healthcare System)/RN/ RBI/ Medline

Supply, installation, testing and commissioning Area line pressure alarm upto 3 gases Analog pressure alarm for low/ Highpressure with mute/test & Gas specific connection. Make:- MHS/ Medline/ MPS/ Medrubb Industries

VIJAY KUMAR GUPTA

Vishal Traders

M/S Rohit Enterprises