Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹24.7 L
EMD Value
₹49,400
Closing Date
14 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CWE Khadki Pune
Headquarters CWE Khadki, Military Engineer Services, Range Hills Road, Khadki, Pune-411003
REPAIR AND MAINTENANCE OF HT EXTERNAL ELECTRIC SUPPLY DISTRIBUTION SYSTEM INCLUDING FILTRATION / REPAIR OF TRANSFORMER VCB / RMU AND REPLACEMENT OF HT UG CABLE AT AUNDH MILIITARY COMPLEX UNDER GE (MH AND RH) KHADKI
2026_MES_799501_1
CWE/KKE/TOKEN- 76 OF 2026-27
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
CWE Khadki Pune
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (MH AND RH) KHADKI
₹49,400
Yes
19 Nov 2026
19 Nov 2026
17 Dec 2026
19 Nov 2026
14 Dec 2026
5 Dec 2026
19 Nov 2026 - 27 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Disconnecting the HV(22KV) & LV(0.415kV) side electrical connections including neutral earth strip of existing step down transformer, drain out the complete oil of transformer and store carefully in clean container. Cleaning of all HV/LV windings terminals, cleaning of conservator tank, cooling fins/tubes, tank, etc. Thuroughly inspecting of core and winding complete, reinsert the core coil assembly into the transformer tank, replacing 5/3 mm thick rubberised corksheet gasket of top cover complete and refilled with filtered transformer oil upto the desired level marked in conservator tank and record the insulation resistance of the winding both HV/LV side between earth and HV/LV winding, reconnecting the HV/LV side electric cables complete of following capacity of stepdown transformer complete all as specified and directed by the Engineer- in -Charge . Note - Transformer oil filtration and top up shall be measured and paid seperately under the relevant item of schedule | |||||
| 1.01 | All as per Item No. 01 above but Transformer capacity 100KVA to 250 KVA | 4 | Each | 13,020 | ₹52,080 |
| 1.02 | All as per Item No. 01 above but Transformer capacity 300KVA to 500 KVA | 4 | Each | 15,620 | ₹62,480 |
| 2 | M&L for dehydration of transformer oil with mobile stream line transformer oil filteration plant at site with all accessories connected to transformer and carrying out filterartion of oil to desired dielectric strenght to achieve electric strength of 60 KV for 1 minute at 2.5 mm gap as per relevant IS for transformer installed at various locations out door/in door type,complete all as specified and directed by the Engineer- in -Charge .
Note : (i)Test certificate shall be submitted for before and after filteration for dielectric strenght on the proper format. (ii) Transformer oil used for top up will be measured and paid seprately under relevant item. | 1,400 | Ltr | 20 | ₹28,000 |
| 3 | Supply and topping up new transformer oil confirming to IS -335 of 1993 into the conservator tank/body tank of the transformer at various location complete all as directed by the Engineer-in-charge.
(Make : Power Oil or its equivalent)
Note : The transformer oil for topping up shall be with di-electric strength of 40KV | 400 | Ltr | 140 | ₹56,000 |
| 4 | Disconnecting all in coming and outdoor cables removing the transformer from the platform/two pole structure and floor and loading it in the vechicle carefully using the crane and transporting it to the workshop for repairs and transformer transport back to site , reinstall it, reconnecting all incoming and outgoing cable by properly crimping using lugs of suitable size taping the bushes/busbar, using insulation tape and testing of capacity 200 KVA to 500 KVA complete all as specified and directed by the Engineer- in -Charge .
Note :LT/HT side ceramic busing, brass spindle for HT/LT side , Rewinding , Dehydration of oil shall be measured and paid seprately in respective Items | 2 | Job | 13,020 | ₹26,040 |
| 5 | M&L for rewinding of HT /LT windings of transformer , winding the defective coils with approved quality copper wire as per IS of same gauge and existing size together with new insulation materials, bracings the terminals before placing into the tranformer and assembling the HT / LT coil with new insulation between core and LT coil all as required and fitting the coils in the chamber, testing and commisioning the transformer after providing necessary connections complete all as specified and directed by the Engineer- in -Charge . | 220 | KG | 1,040 | ₹2,28,800 |
| 6 | M&L for arrest the leakage of transformer oil From the LT/HT side bushings by replacing oil seals , Gaskets of , top cover , conservator tank and other parts of transformer after drain out the transformer at required level , tigtning the transformer nut bolts, replacing the gasket nuts , bolts , washer and refilling the strored Transformer oil after completion of oil arrest complete all as specified and directed by the Engineer- in -Charge .
Note : (i) Spare required such as nut ,bolts,washer,Gasket etc required to oil arrest shall be deemed in quoted rate.
(ii) Topping up of extra transforemer oil required to achieve desired level measured and paid seprately.
(iii) HT/LT side complete bushing assemble with brass stud & oil seal shall be measured & paid under relevent item of schedule. | 2 | Each job | 4,560 | ₹9,120 |
| 6.01 | Supply only HT side bushing 22KV complete with oil seal for 100 to 250 KVA | 1 | Each | 3,120 | ₹3,120 |
| 6.02 | Supply only HT side bushing 22KV complete with oil seal for 300 to 500 KVA | 1 | Each | 3,650 | ₹3,650 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
Tender.pdf
Tender Documents • 0.83 MB
BOQ_897009.xls
BOQ • 3.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .