ADDN AND ALTN TO NWWA KENDRA OF DMDE, WELFARE CENTER AT SERA OF DMDE AND SPECIAL REPAIRS TO ROOF COVERING OF A BLOCK AT SERA AND OTHER SANCTIONED WORKS INSIDE RESTRICTED AREA UNDER GE(I) RND KANCHANBAGH HYDERABAD

Amount

Demolition Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4). complete all as directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.

M&L for Preparing newly plastered surfaces and applying two coats of Premium emulsion paint including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls over a coat of wall putty to make surfaces smooth.

M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L for light coloured vitrified tiles Double charged tiles of any design and pattern, 800x800x9 to 10mm thick, as in floor etc., incl 15mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, tiles shall be free from defects including dismantling existing tile work with screed bed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed.

All as per item No.8 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 and including dismantling existing tile work with plaster complete all as specified and directed.

S&F Non skid joint less coloured ceramic tiles 7-8mm thick size 400x400 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified incl dismantling of old tiles

M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 15mm thick rendering or bedding layer of cement mortar 1:4 and incl dismantling of old tiles complete all as specified.

Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)

S&f Pressed steel frames Double or Single groove 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

M&L cement concrete type C0, 1:3:6 (using 12.50 mm graded aggregate) for filling in steel frames complete all as directed

M&L cement concrete type B1,1:2:4 (using 20mm graded aggregate) in bed blocks or holdfasts, copings and kerbs etc complete all as specified and directed.

S&F 35 mm thick factory made pressed moulded panelled door of single or multi panel texured masonite moulded door fabricated using well seasoned and chemically treated solid second class hardwood styles, rails and panels made out of tubular core bonded with PF synthetic resin confirming to BWP grade IS: 848. Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin. The door's colour, texture design shall be approved by GE complete ass as specified and directed.

M&L preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying pink primer and two coat of synthetic enamel paint.

S&F 150 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, with brass screws complete all as directed.

S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and complete all as specified and directed.

S&F 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed.

S&F 150 mm extruded brass handles,fabricated type polished complete all as specified and directed.

S&F floor door stopper of brass body and tongue and with hard drawn steel spring 140 mm long with screws.

M&L in repairs for providing and fixing gypsum board seemless false ceiling with light weight 12mm thick gypsum board tiles of size 1.20Mx1.80M with GI snap grid frame work for false ceiling grid size 1200 x 1800mm using of 80mm and 40 mm GI channel frame grid suspended with 40mm GI channel ( upto 1800mm length) ajustable level fixed to roof slabs by means of ceiling cleats made out of GI flat complete per specification, and as per direction of Engr in Charge.

M&L 18mm thick Plywood 9 layer grade BWR type BB fixed as in cupboards with screw to timber frame work .

M&L 12mm thick Plywood 9 layer grade BWR type BB fixed as in cupbords with screw to timber frame work .

M&L 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer,s instructions complete all as specified.

S&F Soft closing Hydraulic regular hinges automatic closing type suitable for cupboard doors of thickness 1-1.5mm complete all as directed

S&F stainless steel handles 75mm long made of SS 304 complete all as specified and directed.

S&F Multicolour double layered black out high quality fabric roller blinds Rolling type including hanging mechanism water resistant, UV protection and printed on blinds DMDE crust for window etc fixed complete all as directed . Make: Vista/Amar

S&F water closet pedestal pattern couple type with integrated flushing cistern, seat cover, jointing to waste pipe and PVC connection complete. Make : CAT No 92084 of Hindware/equivalent in Jaquar/Cera

S&F 15 mm dia cast copper alloy chromium plated angle cock with long shank and cup complete in all respect as specified. Make- Jaquar or Equivalent in Hindware, Marc

S&F two way CP brass bib cock complete all as specified and directed by Engineer in charge. Make- Jaquar/ Hindware/ Marc

S&F PVC connection 15 mm bore dia 600 mm long with 2 Nos PTMT nuts with washer complete in all respect as specified

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make- Jaquar, code-ALD-CHR-577 or Equivalent in Hindware, Marc

S&F brass chromium plated toilet paper holder complete in all respect as specified and directed. Make- Jaquar or Equivalent in Hindware, Marc

S&F vitreous china white wash hand basin, oval shape of size 58x43 cm undercounter basin of approved make and model including CI/MS brackets, cutting for and pinning in brackets, including PVC waste pipe, CP waste coupling complete in all respect as specified. Make- ,Hindware Cat No 10080 or Equivalent in Jaquar

S & F in repairs pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed Make Jaquar or Equivalent in Hindware, Marc

S&F in repairs stainless steel peg set of 06 hooks complete all as directed

M&L 100 mm PVC floor trap with SS grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as directed by Engineer in charge

S&F in repairs of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one SS wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as specified. incl dismantling of old windows any descriptions and any size.

Supply & fixing of UPVC windows/ventilators with top hung shutters made out of profile width of from 56 mm to 62 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutters fixed with 5 mm thick tinted or plain float glass.

M&L for Preparing Old/newly plastered surfaces and applying two coats of Co-polymer emulsion based paint for interior application (Royale Play or equivalent). Including priming over two coats of wall putty to make surfaces smooth all as specified and as directed by Engineer-in-charge.

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of Premium emulsion paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge.

S&F 12mm thick Toughened frosted/tinted glass doors both sides swing with self locking floor spring suitable for glass door fitted with necessary fixing arrangements with wall and stainless steel pivot complete in all respect as specified & directed. Make : Modiguard/ saint Gobain/Atul

S&F Stainless steel door lock suitable for glass door of thickness 10-12mm fixed in floors complete with necessary arrangements complete all as speicified and directed.. Make : Godrej/Ozone/Europe

S&F Stainless steel door handle 450mm long for toughened glass door including necessary holes in glass complete all as speicified and directed.

S&F Waterproofing premium Wall papers self Adhesive (Plain/Digital/Texture) Vinyl coated and environmentally friendly, Fire-rated, PVC free and UV resistence complete in all respect as specified & directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified.

S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation complete all as directed.

S&F 110 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls including all fittings (such as bends, elbows, Tee, short pieces, connectors, backnuts, diminishing pieces, caps,plugs and unions etc) complete all as directed.

S&F telescope channel of 304 Grade SS fixed in position with SS screws complete all as directed and specified. Make : Godrej or equilvalent in Hettich/KAFF

S&F in repairs 110 mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors with all fittings (such as bends, elbows, Tee, short pieces, connectors, backnuts, diminishing pieces, caps,plugs and unions etc) complete all as directed.

Demoltion of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris outside MOD land.

M&L for 100 mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

M&L in repairs chequered cement concrete tile machine pressed PU coated with grey cement and pigment of size 300x300x19/20mm laid over and including screed bedding layer 15 mm thick in CM 1:6 complete all as specified and directed.

S&F 5mm thick Toughened frosted/tinted/Plain glass doors with Aluminium profile with necessary fixing arrangements with including Stainless steel auto closing hinges and Stainless steel Handles 100mm long complete in all respect as specified & directed.

S&F factory made solid PVC door frame of size 50x47 mm made out of 5 mm thick plain colour PVC sheet reinforced with M.S. Square tube 19mm x 19 mm of gauge complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars complete all as specified.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling fibre sheets (corrugated,semi corrugated, etc) in roof coverings or wall claddings etc

Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work

Dismantling timber fillets, rails , posts, rafters, purlins etc under 40 sq cm in section, framed work

Dismantling of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish away from MOD land complete all as specified.

M&L providing cement concrete type B1, 1:2:4 using (20 mm graded aggregate) in bands, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, holdfasts, kerbs and similar items including weathering, slightly rounded or chamfered angles and throating, as directed

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc and removing rubbish away from MOD land complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer complete all as specified and as directed by Eng-in-charge.

S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges and valley gutters, fixed with self tapping screws as specified.

M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

Cleaning of roofs, removing debris, vegitation growth, soil deposition, twigs and similar items etc and removing all debris outside MOD complete all as specified and directed.

S&F 25 mm bore dia steel water tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking down old pipes and cutting/chasing in wall/floor complete all as specified

S&F 40 mm bore dia steel water tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking down old pipes and cutting/chasing in wall/floor complete all as specified

S&F 110 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls including all fittings (such as bends, elbows, Tee, short pieces, connectors, backnuts, diminishing pieces, caps,plugs and unions etc) complete all as directed.

S&F 150 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls including all fittings (such as bends, elbows, Tee, short pieces, connectors, backnuts, diminishing pieces, caps,plugs and unions etc) complete all as directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long, dia of neck 5 to 10 mm complete fixed in position all as directed

M&L for steel anchor bolts of length 15cm long, dia of neck 10 to 12 mm complete fixed in position complete all as directed

Material and labour providing reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in columns,pillars etc all as specified and as directed.

Material and labour use & waste of form work to sides of pillars, posts, struts, piers, columns (Square or rectangular) and stanchions. for rough finished surfaces of concrete, complete all as specified and as directed

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) , nexc 100 mm thick as in levelling course over roofs complete all as specified and as directed

Supply and fixing Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and as directed.

Supply and fixing Mild steel TMT bars 5 dia and over upto and including 10 mm dia, as in stirrups spacers links etc quality conforming to TMT bars complete all as specified and as directed.

S&F Rotational moulded polythylene water storage tanks, three layered white in colour (Cylindrical vertical with threaded lid) hoisted and fixed in position, 1000 litres capacity.

SUN LIGHT HOUSE

ELEVATORS MAINTENANCE ENGINEER WORKS

KIRAN CONSTRUCTIONS

Anjana corporation

SRI SAI ENTERPRISES

hari enterprises

Shreshta Associates