REPAIRS TO DOORS, WINDOWS, VENTILATORS, CUPBOARDS AND OTHER RELATED B/R WORKS IN AREA-II UNDER AGE B/R-II AT GE KAMPTEE

Amount

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutters only of any description area not exc 1.00 sqm each complete all as specified and directed.

Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, in any position complete all as specified and directed.

Dismantling of timber fillets, rails, posts, rafters, purlins in frame work under 40 sq cm in section complete all as specified and directed.

M&L for second class hard wood plain fillets size square in section, clean sawn, secured with nails exc 6 but not exc 13 sqcm complete all as specified and directed.

M&L for MS framed work of Fe-290 (Gde E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, MS Plates etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc complete all as specified and directed.

S&F 1.00 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-16 5etc complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides and both faces covered with decorative face veneer with lipping /frame to match complete all as specified and directed.

S&F 30mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and directed.

All as per item No 13 above but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for windows, ventilators etc, as specified in SSR part-I, Sec-08, Clause 8.24(b), complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm long mild steel medium weight cold rolled butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F 75mm long mild steel medium weight cold rolled butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F 125mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 100mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S&F 100mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F steel windows with side hung shutters including butt type hinges with steel handle and steel peg stay, complete with glazing and gauzing bars, dovetailed or welded complete all as specified and directed.

All as per item No 24 above but without glazing bars complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply, fabrication and fixing anodised aluminium doors fixed or openable including frame/chowkats etc from hollow rectangular sections like chowkats of size 100 x 44mm x 1.59mm (appx), vertical styles of size 82 x 44 x 159mm (appx) top and middle rails of size 82 x 44 x 1.59mm (appx) bottom rails of size 114 x 44 x 1.59mm (appx) complete including necessary jointing cleats, glazing clips, anodised aluminium beading and rubber gasket etc for securing glass, anodised aluminium fittings such as handles, other standard fittings, aluminium tower bolts - 2 Nos, Hydraulic Door closer of designation No-3 - 01 No and accessories for locking arrangements etc complete all as specified and directed. Note:- Glazing shall be measured and paid for separately under respective items.

S&F aluminium (powder coated) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as specified and directed. Notes:- (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint Make of Aluminium Sections powder coated:- Jindal or equivalent.

M&L for aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) as per manufacturer's catalogue 7 specifications complete all as specified and directed. (Make:- Grill No. 20 of 'DECO GRILL' or equivalent)

S&F in repairs 5.5mm thick tinted sheet glass, ordinary quality and glazing with Al glazing clips & EPDM beading in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 18/19mm thick prelaminated particle board, exterior grade prelaminated one sides with decorative choice lamination other side balancing white lamination, fixed with screws to timber frame work / mild steel framing/ 6mm thick first class H/W leaping on bare edges complete all as specified and directed.

S&F continuous (piano) hinges, 30mm wide flap mild steel, bright finish or electrogalvanised complete all as specified and directed.

Taking down steel window/ ventilators shutter of any size & description and refix in the same opening after minor repairs / weldings including providing box type hinges 02 Nos at each leaf & necessary small assesories as required complete all as specified and directed.

Taking down aluminium doors shutters and refixing the same after re-setting of all aluminium sections including cleats, beadings and panels complete all as specified and directed.

S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm as in gauze door /window /ventilators shutters including necessary wooden/ steel beading complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/ steel frames glazed with putty or fixed with beads etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality not exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

S&F in repairs 12mm thick sheet glass ordinary quality any shape and size and fixed complete all as specified and directed.

S&F in repairs door closer hydraulically regulated universal type, sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium section designation No-3 complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and rollre plate fixed with screws or welded complete all as specified and directed.

S&F in repairs 125mm aluminium anodised hasp and staple, safety type, hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 20mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed.

S&F in repairs fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

S&F in repairs 150mm extruded aluminium alloy handles fabricated type anodised etc complete all as specified and directed.

S&F in repairs 100mm extruded aluminium alloy handles fabricated type anodised etc complete all as specified and directed.

S&F in repairs 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 125mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 100mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described, exc 10cm width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

S&F in repairs floor door stopper of 140mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs wire brush with aluminium section 20mm x 1mm and brooms to fill the gap of floor and door shutter for door seal/ snake guard complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10cm girth in cement mortar (1:3) in brick wall complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness and wall paneling including cover fillets complete all as specified and directed.

M&L for GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mm x 24mm x 0.30mm, cross tee shall be 28mm x 24mm x 0.30mm thick with black lining in mid portion and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and directed.

M&L for 4mm thick non asbestos, fibre cement building board of size 595 x 595mm size in ceiling fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper over a coat of cement primer and wall care putty complete all as specified and directed.

M&L for rendering 10mm thick on brick work or concrete surfaces with CM (1:6) finished fair and even complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint complete all as specified and directed.

M&L for 2mm thick vinyl flooring including all materials for pasting it to floor and on vertical surfaces etc complete all as specified and directed.

M&L for 50mm dia stainless steel tube of 14 gauge thickness as in hand rails, vertical posts/ balusters etc complete all as specified and directed.

M&L for 25mm dia stainless steel tube of 14 gauge thickness as in hand rails, for small horizontal bars etc complete all as specified and directed.

M&L for 6mm thick plywood, grade BWP, type BB fixed with with screws to timber frame work in wall / cling complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.49,660.00]

DEESHA CONSTRUCTIONS

khushal constructions

chronicle enterprises

Vishwakarma Engineering Works

Asha Enterprises

M/s DS Khekde

Devika Constructions

M/s B S Jain

M/s M.G. Hargunani

Bidder Name

Vishwakarma Engineering Works

chronicle enterprises

DEESHA CONSTRUCTIONS

khushal constructions

Raj Engineering Works

M/s B S Jain

M/s DS Khekde

Devika Constructions

Asha Enterprises

M/s M.G. Hargunani