Internal Electrification of PHC Building at Tarathpora

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC channel to be laid on surface , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. This Excludes Conduit of standard Make:-

Providing and Fixing of Wiring for heating Points in 3x4 Sq. mm FR copper wire Multistrand of Anchor / Havells / Polycab Make including circuit wiring &( Maximum 2 Heating Point on 1 Circuit of 4 Sq mm Wire )16 Amp Switch & Socket of standard Make ( excluding Cost of Channel ) ( Approved Before Installation)

Providing and Fixing of Wiring for Hospital equipment Point in 3x2.5 Sq. mm in mm sq. FR PVC Insulated Multistrand Copper wire of Standard make to be laid in existing surface /recessed medium class pvc conduit /channels ( excluding Cost of Conduit/Channel ) including circuit wiring( Maximum 3 Point on 1 Circuit of 2.5 Sq mm Wire )& the cost of supplying and fixing of 3 No’s 6 Amp 5 pin Socket with 1 No 6 amp control switch of standad make with necessary Connections. ( Approved Before Installation )

Providing and Fixing of Wiring for 6 Amp Wall Plug Points in 3x2.5 Sq. mm in mm sq. copper wire multistand of Standard Make including 6 Amp Switch & Socket of SSKFantasty/ Havells /GM Make( exec Cost Conduit /Channel ) ( Approved Before Installation . )

Supply and laying of PVC medium grade Conduit/ channel to be laid on surface with screws fixed in rowel plugs complete with all allied accrues like bends, tees etc.approved before installation) 25/31 dia

Supply. Installation, testing and commissioning of heavy duty wall fans of ISI Mark (to be got approved before installation) complete with wall nose and connection wire.

Providing and Fixi.ng of 350 Watt Electronic Fan Dimmer of Standard Make With Necessary Connections ( Approved before installation )

Supply. Installation, testing and commissioning of 250 mm sq Shutter Type Exhaust fans of ISI Mark approved before installation)

Providing ,Installation ,Testing and Commissioning of 9 Watt LED Lamp mounted on Holder fixture having aluminium body of ISI Mark .The job includes replacement warrenty of LED light for a period of three years (incase anyHolder is damaged what so ever reason) reckoned from date of sucessful commissioning approved before installation)

Supply and Fixing of Batten 1200 mm Long 40Watt LED Tube light of Standard Make. With Celling rose & Transparent wire &nececessary Connections Connections ( Approved before installation )

Providing and fixing of AC/DC bell of ISI Mark complete with batteries.approved before installation)

Providing & Fixing of Double Door Distribution Board of Standard make to be Recessed In Walls including Refacing of Walls. Complete Job ( Approved before installation )

Supply and fixing of 6 – 16 amp Single pole MCB OF Standard Make With necessary Connections. ( Approved before installation )

Supply and fixing of 40 - 63 amp Double pole MCB Of Havvel’s / Legrand / ABB Make With necessary Connections. ( Approved before installation )

Supply , Laying and connecting of 10 sq. mm PVC Insulated Multi Stand copper wire of ISI Mark laid through PVC conduit excluding cost of conduit for heating sub-main.approved before installation)

Supply , Laying and connecting of 6 sq. mm PVC Insulated Multi Stand copper wire of ISI Mark laid through /channel /conduit excluding cost of conduit for lighting sub-main and earth sub-main.approved before installation)

Supply , Laying and connecting of 4 sq. mm PVC Insulated Multi Stand copper wire of ISI Mark laid through conduit excluding cost of conduit for circuit wire for heating.approved before installation)

supply/ installation/testing and commissioning of (Floor Panel) floor mounted compartmentalized , 415 volts(3-PH,TPN MCCB Main Distribution Panel power coated sheet steel of 16 gauge of adequate size to accommodate following accessories having dust protected, vermin proof incl of earth terminal with all necessary accessories as required Incomer 250 Amp TPN MCCB of ISI Mark with breaking capacity of 35 KA = 1 no 400 Amp TPN Bus-bar = 1 no 100 Amps F.Pole Change over Switch of ISI Mark 200 Amps TPN Bus Bar Aluminium = 1 Set Volt meter =1 no Ammeter = 1no CT coils for Am meter 300 /5A = 1 set Outgoing 63 Amps DP MCB of ISI Mark = 8 No 40 Amps DP MCB of ISI Mark = 8 No 32 Amps DP MCB of ISI Mark for inverter Sub-Main = 8 No ( approved before installation)

Supply ,installation and commissioning of 63 Amp 4 Pole Change Over Standard Make ( Approved before installation )

Supply and fixing of Main Service Line in 35 Sq. mm 2Core Aluminiumarmed CableofHavells orEqt Make. Providing & Fixing of 4 sq. mm FR PVC Multistand Copper wire of Havells / Anchor Make Laid in PVC Conduit/ Channels ( Excluding Cost of Conduit/ Channel ) for Computer Sub Main Connections ( Approved before installation

Providing GI Earthling with GI earth plate embedded in pit of 8 feet depth to be excavated and refilled with alternative layer of charcoal clay and salt to be extended to main in no 12 bear Copper wire ,with 38 mm dia GI pipe funnel Complete Job.

Supply and Fixing of 60 Watt LED Street light with bracket arm Standard make including necessary connections Complete Job on existing poles ( Approved before installation

Disposal of unwanted debris

Supply, Installation, Testing and commissioning of Kva 3-phase 25 kva Servo Control Stabilizer oil cooled with input voltage 120-260 volts, 50 Hz and a constant output voltage of 415 volts. The stabilizer shall be provided with high and low cut-off voltage system, overload/underload & single-phase protections and also shall resist the input and output + 5% tolerance. The item includes its thimbling as required at tapping points for in and out. The stabilizer shall be standard make with one-year warranty period.

HANJI ELECTRONICS

B_CONSTRUCTIONS ELECTRICALS AND MECHANICAL