Repair/ renovation of Co- Operative Office Complex at Udhampur.

Amount

Demolishing brick work manually / By Mechanical means incl. stacking of serviceable material and disposal of unserviceable Material with in 50 mtr. Lead (in cement mortar).

Demolishing stone rubble masonry manually/ by mechenical means including stacking of servicceable material and disposal of unserviceable material within 50 mtr lead in lime mortar.

Demolishing R.C.C work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material with all lead and lift complete 1:2:4 or richer mix.

Demolishing cement concrete manually/ by mechanical means including disposal of material.

1:3:6 or richer mix

1:4:8 or leaner mix

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width & for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, depth upto 1.5 m including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled & neatly dressed. extra for every additional lead of 50 mtr beyond 1 mtr upto 250 mtr and disposit to a level of 1.5 mtr. All kinds of soil

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:5:10 (1 cement : 5 coarse sand : 10 graded stone agg. 40 mm nominal size) Nallah.

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm nominal size) crushed with 30% plum.

Half Brick masonry with bricks of class designation 75 in foundation and plinth in cement mortar 1 : 4 (1 cement : 4 coarse sand)

Extra for half brick masonry in superstructure above plinth level up to floor V level.

Providing and laying in position of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size).

Reinforcement for RCC works incl. straightening, cutting, bending, placing in position & binding all complete cold twisted bars.

Centering & shuttering incl. strutting , propping etc. and removal of form work for :-

Foundations, footings, bases of columns etc.

Suspended floors , roofs, landings, balconies, & access platform.

Edges of slabs and breaks in floor and walls under 20 cm wide.

12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand).

Structural steel work welded in built up section/ framed work including cutting hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc as required in grating frames, guard bars, ladders, railings brackets, gates & similar works.

Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry, but excluding the coat of nosing of steps etc. complete 50mm thick with 20mm nominal size of stone aggregate.

Providing & fixing glass strips in joints of Terrazzo/ cement conc. Floor 40 mm wide and 4 mm thick.

Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplaste Star, Lotous or equivalent having valid ISI License). (1000 ltr capacity)

Providing & fixing G.I pipes complete with G.I fittings including trenching & refilling etc. (external work)

15 mm dia nominal bore

20 mm dia nominal bore

Providing & fixing 15 mm dia float valve

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm. and under including cutting the patch in proper shape raking out joints and preparing the plastering the surface of the wall’s complete including disposal of rubbish to the dumping ground within 50 mtr. Lead. With cement mortar (1:4) 1 cement : 4 fine sand

Labour required for making rough to existing room floors for laying of vetrified floor tiles incl. Removing door shutters and refixing the same after laying of tiles

Labour required

Carpenter required

Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ; Size of tile 60x60 cm incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colour , shades except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm. Incl. pointing in white cement mixed with pigment of matching shade complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing wall with acrylic smooth exterior paint of required shade on new work (Two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing cement paint applied @ 2.2 kg/10 sqm.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work.

Carriage of material by M.T incl loading/unloading & stacking complete

Sand av lead 25 km

Stone agg Below 40 mm nominal size av lead 10 km

Bricks av lead 12 km

Disposal of mulba av lead 5 km

Anil Kumar

M/s Subash Chander