Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹28.0 L+₹75,210 (2.76%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹33.3 L+₹6.1 L (22.3%)Rejected-AOC H NO 1366 3 GALI NO 6 MATA ROAD NEAR HAPPY MODEL SCHOOL RAJIV NAGAR GURGAON 122 001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹37.7 L+₹10.5 L (38.5%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹44.3 L+₹17.0 L (62.4%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Gurgaon No 1
GE (AF) Gurgaon No 1 NEar Atul Kataria Chowk Gurgaon
CA NO. GE AF NO.1/GUR-27/2023-24 REPAIR/REPLACEMENT OF JOINERY, ROOFING, PLASTERING, GRIT WASH AND OTHER BR WORKS IN OR MD ACCN AND EQUIVALENT AT AF STN GURGAON UNDER GE (AF) GURGAON NO 1..
2023_MES_595216_1
GE AF No 1/GUR-27/2023-24
Open Tender
Miscellaneous Works
Item Rate
270 days
GE (AF) Gurgaon No 1
All as per NIT
10 documents required · 10 mandatory
₹500
GE (AF) Gurgaon No 1
₹90,000
Yes
23 Jun 2023
13 May 2023
14 Jun 2023
13 May 2023
12 Jun 2023
29 May 2023
Amount
Dismantling of brick work built in cement mortar including all qoins, arches, pillars, etc.complete all as specified directed ny Engr-in-Charge.
M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed by Engr-in-Charge.
All as per srl item No. 2 here in before but except bricks Note:- Serviceable bricks obatined from srl item No. 1 shall be re-used in srl item No. 3 after cleaning etc complete all as specified and directed by Engr-in-Charge.
M&L Gunitting work for RCC work as in columns, beam, slab, perapet, chajjas etc by removing all loose concrete on the reinforcement, cleaning the surfaces with wire brushes and reinforcement with sand papers than applying apoxy paint to rusted reinforcement and S&F welded wire mesh fabric size not less than 95x95x3 mm on the prepare surfaces and finally applying guniniting 30 to 40 mm thick (average thickness )with presure gun using 1 part of cement and 3 part of coarse cement incl necessary form work where ever required all gunnited surface shall be brought in complete geometric figure even in the guniting opration only complete all as specified and directed. Note:- Where new or additional reinforcement is required the same shall be paid for separetaly of this schedule as above.
M&L for washed stone grit plaster on exterior walls in two layers under layer 12mm cement plaster 1:4 (1cement 4coarse sand) furrowingthe under layer with scratching tool applying cement slurry @ 3kg/sqm top layer 15mm cement plaster 1:1/2:2 ( 1white cement 1/2 coarse sand : 2 stone chipping coloured 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing & washing the top layer with brushes & water to expose the stone chipping complete all as speacified pattern decided by Engr-in-Charge.(payment for providing grooves shall be made separately). Note:- Top layer of shade be of white cement using colouring pigment & stone chipping of desired colour as approved.
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
M&L for TMT bar mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Engr-in-Charge.
All as per item No 7 here-in-before but but 6mm to 8mm dia all as per specified and directed by Engr-in-Charge.
Taking down cement plaster, any description on brick walls or on concrete surfaces including racking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed.
M&L for rendering 5 mm thick in cement motar 1:3 on ceiling on concrete surfaces, finished fair & even without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15 mm thick in cement motar 1:6 on brick work or concrete surfaces other than fair face of brick work, finished fair & even without using extra cement all as specified and directed by Engr-in-Charge.
M&L for Preparing Newly Plastered Surfaces of walls and applying two coat of exterior grade acrylic emulsion paint over one coat of JK/cement base putty with one coat of primer complete all as specified and directed by Engineer-in-Charge.
M&L for Preparing New Plastered Surfaces of WALLS and applying TWO COATS of DISTEMPER OIL EMULSION over a Coat of CHALK WHITING, complete all as specified and as directed. by Engineer-in-Charge.
M&L for Preparation of new plaster surfaces of ceiling, and applying two coat of white wash on ceiling all as directed by Engr-in-Charge.
M&L for Complete removal of existing treatment upto plastered surfaces including preparation of old decorated surfaces of walls and cornices and applying two coat of exterior grade acrylic emulsion paint over one coat of JK/cement base putty and primer complete all as specified and as directed by Engineer-in-Charge.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specidfied and directed by Engr-in-Charge.
S&F 8 to 10mm thick densified reqular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm including main 'T' runner of size 24x38mm made from 0.33 mm sheet hot deep galvanized steel section and angle on sides complete all as directed by Engr-in-Charge.
S&F 8 to 10mm thick densifed regular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm without disterbing the other false ceiling and making good existing frame complete all as specified and directed by Engr-in-Charge.
S&F 4 to 5 mm thick non asbestos fibre cement building board as in false ceilling and making to good existing frame without disturbing the other false ceilling board complete all as specified.
S&F Solid PVC Wall Lining consisting of 5mm thick plain /wood grain printed colour PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & drawing
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and as directed by Engg-in-Charge.
S&F in repairs 25mm dia 16 gauge Aluminium powder coated curtain rods with sides designer pattern wall bracket & knobs/domes suitable for 25mm dia curtain rods including cutting and fixing complete all as specified and as directed by Engr-in-Charge
S&F in repair 18/19 mm thick prelaminated particle board interior gde prelaminated one side with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes inculding beading etc all as directed.
S&F in repair 25 mm thick Block board interior Gde 2 quality commercial type decorated face veneer on one face fixed with screws as in cup board shelves etc all as directed.
S&F in repair aluminium alloy door seal 1m long fixed to wooden doors complete all as specified and as directed by Engineer-in-Charge.
S&F in repair, Mortice latch with two levers (vertical type), mild steel body and fixed (length of latch 100mm) complete all as specified and as directed by Engineer-in-Charge.
S&F in repair ISI marked hydraulically regulated door closer aluminium (extruded section) body type complete suitable for door shutter width upto 1.50 mtr and weight between 61 to 80 kg complete all as specified and as directed by Engineer-in-Charge.
Dismantling of wall/ floor tile including backing coat any description or any thickness led beded and pointed in any cement motar and removal to out of MD land complete all as specified and directed by Engr-in-Charge.
M&L for glossy chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with white cement and pigments in any colour machine preassed glazed , over cement screed bed 15mm thick cement motor 1:6 all as specified and as directed by Engr-in-charge.make nitco/arena or equivalent all as specified and directed by Engr-in-Charge.
M&L for glazed ceramic coloured designer concept tiles matching with existing tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc all as specified and as directed by Engr-in-Charge.
M&L for non skid ceramic coloured tile 7 to 8mm thick (square/rectangular area of each tiles exceeding 0.11 Square but not exceeding 0.18 Sqm in floor over 15mm thick screed bed in cement motar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the tile all as directed by Engr-in-Charge.
M&L for 16 to 18 mm thick granite (any type) in single piece (if required for length upto 2.5 mtr )machine cut laid over CM screed bed 15 mm thick in cm 1:6 and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including mirror polishing and bull nosing edging in any position any shape etc all as directed by Engr-in-Charge.
M&L for 18-20 mm thick machine cut and pre-polished Kota stone slab flooring over 15mm thick in CM 1:6 cement screed bed and jointed with gray cement slurry mix with pigment to match the shade of slab including final polishing complete all as directed by Engr-in-Charge.
Taking down corrugated steel sheeting,any gauge,thicknessincluding nainital or similar pattern roof covering complete all as directed by Engr-in-Charge.
S&F 0.5 mm thick pre coated thick galvalume aluminium zink coated GI based corrougated steel sheeting of any colour having tansile strength of 550 MPA as in roof covering/glading to wall fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.
M&L for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.complete all as specified and directed by Engr-in-Charge.
M&L for post construction antitermite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed by Engr and Charge.
Demolition in cement concrete in any description and any position not other wise specified and provided as in ground floor and paving nexc. 15 cm thickness (below above ground floor) all as directed by Engr-in-Charge.
M&L for 75 mm thick in PCC 1:3:6 type C-2 using 40mm graded aggregate as in Plinth protection including 6x10mm grove in every 3Mtr including bitumen mastic filling in joints complete all as specified and directed by Engr-in-Charge.
M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.
Dismantling mild steel work of any description and in any position not otherwise provided complete all as specified.
M&L fabricated frame work as in doors /windows frame using MS Box section of required size for making rebate to fix Shutter and other section with gusset plate rails, braces etc. complete drilled for fixing Door Shutter with MS Butt Hinges and hole for tower bolt, sliding boltetc or other covering door etc to be prepared for hanging with and including hinges all as specified and as directed.
M&L for mild steel works as in grills and railing of Fe-410-0or Fe 310-0, complete all as specified and as directed by Engr-in-charge
M&L PCC for 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching & for fixing railing, holdfast etc complete all as specified and directed.
Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed.
S&F 4.0mm thick sheet glass plain pane best quality fixing to Aluminium/Steel/wooden Sections as in Panel of Doors/Windows/Ventilator and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed.
S&F 4.0mm thick Glass pane figured pin headed type, best quality, fixing to Aluminium/Steel Sections as in Panel of Doors/ Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed.
M&L Preparation of new steel surface exc 10 cm width/girth one coat red oxide primer and two coat synthetic enamel paint all as specified and directed bi Engineer-in-charge.
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (withour taking off shutters from the frame all as specified and directed by Engr-in-Charge.
Taking down shutter of any discription exc 1 Sqm and n exc 2 Sqm each and removal under credit complete all as specified directed by Engr in Charge.
Taking down shutter of any discription exc 2 Sqm each and removal under credit complete all as specified directed by Engr in Charge.
S&F 30mm thick factory made flush door shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides all as specified and directed by Engr-in-Charge.
M&L second class Hardwood 35 mm thickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified by Engr-in-Charge.
M&L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink wood primer all as specified and directed by Engineer-in-Charge.
S&F stainless steel bright polished barrel tower bolt with plate with 10mm dia of shoot and 200mm long complete all as specified and as directed by Engr-in-Charge.
S&F 125mm long medium grade stainless steel but hinges bright polished fix with nut and bolt complete all as specified and as directed by Engr-in-Charge.
S&F 250mm long, 16mm dia stainless steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos with fixing with nut & bolt all as specified and as directed by Engr in Charge.
S&F stain less steel bright polished bow handle solid type 150mm grip length fency type all as specified directed by Engr in Charge.
S&F two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed.
S&F in repair stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.
S&F polyester powder coated aluminium frame/chowkhat for door shutter of section 101.0x44.4 mm of gauge 16 fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyester powder powder coated aluminium door shutter top rain and middle rail of section 85x44.4 of 16 gauge and bottom rail of section 150x44.4 mm 16 gauge (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) incl aluminium fittings such handle (2 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, anodised aluminium snap beading screw, hinges type B-21 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board to be measured separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge (Make of aluminium section shall be hindalco/Jindal and equvalent)
S&F polyester powder coated aluminium frame/chowkhat for window/ ventilator of section 63.5x38.1 mm of 16 guage fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyster powder coated of any colour anodised aluminium window & ventilator shutters side hung type without sash bars aluminium with section 44.4x44.4mm of 16 guage including necessary jointing cleats, glazing clips, rubbers packing powder coated anodised aluminium snap beading, screw, powder coated aluminium anodised fittings such as peg stays 150mm long (1Nos), Hinges type B-21 100mm long (2Nos) suitable handle 1 Nos complete all as specified and directed by Engineer-in-Charge.
M&L, for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, complete all as specified and directed by Engr-in-Charge.
S&F aluminium anodized grill DG 208 design as per approved pattern including aluminium beads etc complete all as specified and directed by Engr-in-Charge.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain printed PVC Sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beaading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; supplying & fixing in the frame at site complete all as shown in sketch in SSR Pt-II and directed by the Engineer in Charge.
S&F factory made solid PVC door framing of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube incl fixing in opening as per specification and drawing as shown on page No 150 of SSR Part II complete all as specified and directed by the Engineer in Charge. .
S&F in repair 15mm bore, CPVC pipes SDR11 & Plain CPVC SDR11 fittings on walls/ceiling or laying in floors and taking down or up of steel tubing and connection , including cleaning for re fixing complete all as specified and directed by Engr-in-Charge.
S&F in repair 20mm bore, CPVC pipes SDR11 & Plain CPVC SDR11 fittings on walls/ceiling or laying in floors and taking down or up of steel tubing and connection , including cleaning for re fixing complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC 10 Ltrs syphonic action flushing cistern low level ,white with inlet bole valve, PVC float valve and handle and including brackets all as directed by Engr-in-Charge.
S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of cement concrete type D-1 and P traps complete all as specified and as directed by Engineer-in-Charge.
S&F in repair chromium plated fancy type foam flow Bib taps 15 mm dia cast copper alloy with crutch or handle screwed down, screwed for iron pipe complete all as specified.
S&F, in repair angular stop cock, 15 mm dia fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or handle screwed both ends for iron pipe or for union complete all as specified & directed by Engr-in-Charge .
S&F in repair 10mm thick, 200mm quarter round , as bull nosing fixed with stainless steel bracket with steel screw in corner shelf all as specified and directed by Engr-in-Charge.Make Nixo/Jagour and equvalent
S&F in repair 60 cm long PVC connection with two nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe of existing one etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repair vertical blinds for windows/door/ventelator of any colour and pattern as approved by Engr-in-Charge including connected items ie. rod, hook etc and complete fitting all as specified and as directed by Engineer-in-Charge..
Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MOD land, complete all as specified and directed.
M&L PCC (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 10mm thick cement plaster on brick work or over roof surface in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 0.50% by weight of cement on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.
M&L for water proofing treatment of roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified. (c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.00 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.
Supply only water proofing liquid compoundcomplete all as specified and directed by Engr-in-Charge. :Make : DR. FIXIT PIDE PROOF LW, CICO, FOSROC.
M&L for Appling one coat Bitumen water proofing aluminium heat resistance paint on the roof as per manufacture instructions complete all as specified and directed by Engr-in-Charge. Make : PLASCON/PLASCON or equalant
Note:- The amount of Rs 97,985/- against Schedule of Credit on Page No 142 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance
NAVYUG VYAPARI
PAWAN KUMAR
J D ENTERPRISES
Phogat Builders
M/S Parshant Associates
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .