Ordinary Repair Work For Pot Hole Filling In km 5.500 to 7.00, Km 7.0 to 9.00,km 13.00 to 15.00, ,km 17.00 to 18.00 km 27.00 to 31.00 km 37.00 to 39.00 and km 40.00 to 47.00 and Routine Maintainance work in km 7.00 to 54.00 to Nagpur Katol NH 353-J

Amount

BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/ Tack coat etc. complete --Bitumen 3.30% of specified grade (VG-30 bulk bitumen rates are considered to arrive at rates)SSR 2019-20 item no 3.42 P. No 47

Patch repair on already filled pot holes with 20 mm premix carpet and seal coat as per MORTH specification clause 3004.1 and 3004.2 SSR 2019-20 item 8.08 P. No 97

Repair to pot holes and removal of loose material, trimming of sides cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat as per MORTH specification clause 3004.1 and 3004.2 SSR 2019-20 item 8.08 P. No 98

Supplying and fixing of Plastic body studs with two shanks and without shanks of SWAREFLEX or equivalent in yellow , red and white color made of ABS body with size 100*100*17.9 mm, having reflective panels of 34 special Swaro glass reflective elements embedded in plastic and 19 degrees tilted to provide the highest reflectivity . Having reflective panels in yellow , red and white plastic with yellow , red, white or green Swaro glass elements. The studs shall have a compressive strength test certificate of 25 tons in accordance with ASTDM D 4280 and successfully passing retro reflectivity test as per EN 1463-1 and the road test EN 1463-2 from a reputed laboratory . The fixing of the road studs shall be done by using a recommended Two Component Epoxy . In addition two holes should be drilled in the depth of 50 mm on the road for the version with two shanks.SSR 2019-20 Item No P. No

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.SSR 2019-20 item 6.12(a) P. No 63

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness SSR 2019-20 item no 2.09 P. No 35

Road Delineators: Supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80x100mm rectangular or 75mm dia. Circular reflectorised panels at the top, buried or pressed into the ground and confirming to I.R.C. 79 and the drawings SSR 2019-20 item 6.15 P. No 64

Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary , cleaning and preparing the surface (excluding primer coat) etc. complete SSR 2019-20 item 35.09 P. No 272

Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary , cleaning the surface and preparing surface etc. complete. (excluding primer coat) SSR 2019-20 item 35.11 P. No 272

Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete SSR 2019-20 item 6.05 P. No 60

White washing two coats on parapet walls and white washing and geru lime painting to tree trunks including preparation of surface by cleaning scraping etc. complete SSR 2019-20 item 8.22 P. No 9

Providing laying, spreading and compacting hard murum having PI < 6, including spreading in uniform layers on a prepared surface and compacting with Static roller having weight 8 to 10 MT including necessary artificial watering all materials, labour, machinery, guarding, barracating complete with all leads and lifts of all materials etc. complete.( As per rate analysis attached .) SSR 2019-20 item 2.29(a),2.30 , 2.31 P. No 37

ashish contractor