Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹26.4 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹31.3 L+₹4.6 L (17.0%)Rejected-Finance SANAT NAGAR SRINAGAR PIN 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-2 | Rejected-Finance Other than L-1 | |
| 3 | L-3₹31.8 L+₹5.1 L (18.9%)Rejected-Finance R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L-3 | Rejected-Finance Other than L-1 | |
| 4 | L-4₹34.4 L+₹7.6 L (28.4%)Rejected-Finance | L-4 | Rejected-Finance Other than L-1 | |
| 5 | L-5₹34.7 L+₹7.9 L (29.6%)Rejected-Finance | L-5 | Rejected-Finance Other than L-1 |
Tender Value
₹38.9 L
EMD Value
₹77,800
Closing Date
27 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt. Col Preetham P GE
GE 970 EWS C/o 56 APO PIN-913970
CERTAIN SANCTIONED WORKS AT HAFT CHINAR UNDER GE 970 EWS
2024_MES_644377_1
GE 970 EWS-75/2023-24
Open Tender
Civil Works
Item Rate
270 days
HAFT CHINAR
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹77,800
Yes
12 Jun 2024
27 Feb 2024
2 Apr 2024
27 Feb 2024
27 Mar 2024
14 Mar 2024
Amount
S&F mild steel powder coated wooden finish curtain rod 25mm dia fixed with decorative brackets ,stop, roller at the end etc in repair complete all as specified and directed.
Supply and fixing for aluminium alloy anodized (powder-coated) door frame and shutters with hollow aluminium anodized sections as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, dead lock 4 levers, two numbers of aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a) Door Frame single groove 101mmx44mmx3mm thick (b) Shutter top 80mmx44mmx3mm thick. (c) Shutter bottom 110mmx44mmx3mm thick (d) Shutter vertical 80mmx44mmx3mm thick (e) Shutter middle 80mmx44mmx3mm thick. (f) Gauging clip weighing not less than 0.097kg/metre Note : The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane shall be measured and paid separately. .
Supply and fixing for aluminium alloy anodized (powder-coated) window frame with double shutters open able type, with aluminium sections as per of “Jindal” section numbers for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, aluminium anodized barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a)Frame of section 101.6mmx44.45mmx2.10mm thick and section for shutter 47.62x44.45x1.95 mm thick (b) Mullion 53mmx52mmx 2mm thick not less than 1.065 kg/mtr. (c) Glazing clip weighing 0.259kg/mtr. (d) Windows shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and one no per each open able leaf shall be provided. Note : The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane and wire gauge shall be measured and paid for separately.
S&F double action floor spring, hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet, foundation box, main body with steel cover governing pivot made of brass, parts made of mild steel, heavy duty, in repair complete all as specified and directed.
S & F Galvanised powder coated snap grid frame works of 605x605 mm for false ceiling including fixing of arrangement including hanging.The snap grid shall be consist of aluminium main/cross tee of size 24mmx32mmx 0.30mm and 15mm x32mmx0.30mm. The snap grid frame shall fixed to ceiling with supporting hangers consisting of 4 mm dia GI wire with necessary bolts and nuts and washers including 12mm thick gypsum board ceiling including taking down existing boarding/ false ceiling Make of Snap Grid frame Armstrong or Equivalent
M&L for Johnson Endura paving coloured tiles of techno commercial equivalent of size 300mmx300mmx10mm set and jointed in neat cement slurry pointed with white or coloured cement laid over and incl 15mm thick screed bed built in CM (1:6) after demolition old floor hearth or wall tiling complete all as specified & directed
S&F 12mm thick toughned glass door with two nos handles, three hinges, locking arrangement, brass mortice lock & Floor machine (spring) etc complete all as per manucturer instructions and directed .
M&L for BWF approved grade 1 canadian maple wood sports flooring system for squash court including preparation of existing PCC flooring for receiving maple wood flooring complete all as specified and directed.
M&L for applying squash court rebound wall hard plaster system as per International Standards complete all as specified and as directed .
M&L for applying APEX ultima paint in squash court wall painting color white in between game line marking complete all as specified and as diected .
Supply and fixing of squash court sound board as per WSF specifiaction complete all as specified and as directed .
M&L for preparation of wall or floor surface and applying PU paint on wall and wooden floor surface for marking required lines of squash court complete all as specified and as directed .
Surface excavation in any type of soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed .
Excavation over areas not exceeding 1.5m depth for fdn, etc., and getting out in any type of soil, complete all as specified and as directed .
Description all as above but exc 1.5m but not exceeding 3m in depth .
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in any type of soil, complete all as specified and as directed .
Returning and filling in soil incl levelling, watering and well ramming in layers not exceeding 25cm , complete all as specified and as directed .
Surface dressing in any type of soil , complete all as specified and as directed .
Removing excavated soil to a dist not exceeding 50m and depositing where directed at a level not exceeding1.5m above the starting point, complete all as specified and as directed .
M&L for Loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells, complete all as specified and as directed .
M & L for hardcore of broken bricks n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete.
M & L for providing cement concrete 1:2:4 Type B0 using 12.5mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth, string, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, formwork, complete all as specified and as directed .
M&L for RCC M25 (Design Mix) 20 mm graded stone aggregates as in , foundation, plinth beam, band, beam, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves and the like complete all as specified and directed. (Note : Design of structure shall be got approved by the competent authority)
Supply only Integral water proofing compound
M & L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed .
M & L for brickwork with sub-class `B` bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed .
M & L for walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and as directed .
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifed .
Use and waste form work to sides and soffits of floor or roof beams, lintel beam , cantilevers, shelves etc. complete all as specifed .
Formwork to edges of RCC bands slabs etc exc 10 but nexc 20cm wide.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge
S&F aluminum mortice lock, vertical type, 4 Levers and 100mm size, in repair complete all as specified and as directed .
S & F mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 30cm long and 12mm dia. of neck complete all as specified and as directed .
M&L for TMT bars 10mm dia and over cut to length bent to shape spirally for hooping, hooking ends and binding with MS wire (annealed) not less than 0.5mm dia or securing clips, etc., complete
Description all as item No 35 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders etc.
S & F for rolled mild steel in plates channels (plain or chequered), square cut or notched (ordinary and counter sunk) forming holes, without any attachment, of quality GDE Fe 410-S complete all as specified and as directed .
S & F rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., quality confirming to GDE Fe 410-S including one shop coat of zinc chromate primer complete all as specified and as directed .
S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 including one shop coat of zinc chromate primer complete all as specified and as directed .
S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.
S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.
M&L for 75mm thick PCC 1:2:4 type B2 (using 40mm graded granite stone aggregate) in flooring , sub base etc. complete all as specified and as directed .
M&L, 75 mm thick PCC (1:3:6) C-2 using 40mm graded stone agg in path/plinth protection finished even & smooth completed W/O using extra cement.
M&L for 75mm thick cement concrete 1:4:8 type D-2, (using 20mm graded stone aggregate) as in floor sub base, path complete all as specified and as directed.
M&L for 25mm thick cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) including demolition of PCC floor of any description complete all as specified and directed by the Engineer-in-Charge
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.18 but not exc 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm cement screed bed in CM (1:6) complete all as specified.
Description allas above item No-46 but as in skirting cut to require size laid over and including 10mm thick backing coat/ rendering in CM (1:4) complete all as specified.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with Grey cement and no pigment laid over and including 30 - 40 mm thick cushioning layer of dry sand complete, all as specified and as directed.
Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and no pigment laid over and including 30 - 40 mm thick cushioning layer of dry sand complete, all as specified and as directed.
M&L 15 mm thick cement plaster on fair faces of bricks or concrete surface in CM 1:6 finished even and smooth with out using extra cement on wall complete all as specified.
M&L 15 mm thick cement plaster in CM 1:4 on other than fair faces of conrete or brick surfaces finished even and smooth with out using extra cement on wall complete all as specified.
M & L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge
M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper using painting roller over two coat of wall care putty complete all as specified and directed by engineer in charge.
M&L for preparation of old plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resisitant primer complete all as specified
M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resisitant primer complete all as specified
M&L for sheet glass 5.0mm thick, ordinary quality to be fixed in aluminium frame in square exceeding 0.5 sq m in each pane complete all as specified and as directed.
M & L for solar control film 25 micron, reflective type sticked to glass panes as per instructions of manufacturers, exc 1.5 sqm complete all as specified and as directed by the Engineer-in-Charge
M & L for preparation of new or previously untreated surfaces of brick or concrete of any description over 10cm girth or width, not other wise described and applying two coats of synthetic enamel paint over a coat of plaster priming coat complete all as specified and as directed.
Preparation of new surfaces of steel any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.
S & F 20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.
Description allas above item No-62 but fixed to wall with suitable MS clamps.
S&F 110mm dia PVC(SWR) bend any radius.
S&F PVC (SWR) vent cowl 150mm size
S&F Sail-glazed stoneware drain pipes laid in trenches and jointed as specified 200mm dia in trenches, complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars , etc, but excluding ashlar facings, dressed stone-work and precast concrete articles All as above but built in cement mortar or cement lime mortar for ashlar facings, dressed stonework, pre-cast concrete articles and precast concrete block walling complete all as specified and as directed .
Demolition of concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position (Framed work) complete all as specified and as directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.
Taking down carefully unsv/damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc) and removing material from site and making good to the disturbed surface to match with existing finish etc complete all as specified and directed.
Point wiring using FRLS-H PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS-H PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bend, junction box and pressed steel sunken box 60 mm deep & 1.6 mm thick duly painted inside and anticorrosive out side for mounting switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet cover of suitable size, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/bell point etc complete all as specified and directed. (Note : Switch/bell push/fan regulator etc shall be measured and paid separately)
All as per Srl item No. 73 above but for 3 Pin 5 Amp socket outlet point controlled by one switch 5 Amps one way on same board complete all as specified and directed.
All as per Srl item No. 73 above but for 5 Pin 5 Amp switch socket outlet on independent board complete all as specified and directed.
All as per Srl item No. 73 above but for one 15Amp switch socket outlet point concealed using 2.5 Sqmm FR-LSH PVC insulated multi-strand copper conductor wire including 1.5 Sqmm FR-LSH PVC insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finishes etc complete all as specified and directed.
M&L for Socket outlet, 2 in 1, 3 pin, 6 Amp, flush type, AC 230 volts etc complete all as specified and directed.
M&L forSwitch socket combination, 5 Amp, 2 in 1, flush type, ISI marked, complete all as specified and directed.
M&L for Switch socket combination, 3 pin, 16 amp, ISI marked complete all as specified and directed.
Supply and fixing in repair 1x20 W LED 6000k (4 ft long) decorative ultra slim square prfile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and itegrated electronic driver complete with lamp complete all as specified and directed.
Supply and fixing in repair LED profile lighting for ceiling 5 mtr LED strip with diffuser, driver and other connected accessories complete all as specified and directed.
Supply and fixing in repair aluminium profile/channel for LEd light strip (Pack of 5, rectangular, off white) 1 mtr each profile with end caps including metal complete all as specified and directed.
M&L for Lamp holder(in replacement) insulated body with back plate suitable for batten fitting including LED lamp of capacity 15 watts complete all as specified and directed..
M&L for Switch piano flush type, single pole, 6 Amp, one way, AC 230 volts etc complete, all as specified and directed.
M&L for Electronic fan regulator, stepped type, hum free socket type suitable to control speed of fan 0-100%, 230 V etc complete all as specified and directed.
M&L for Ceiling rose polycarbonate isolated body surface Bakelite, not less than 50x20mm, three terminals, AC 230 volts etc complete all as specified and directed.
Supply and Fixing in repair Street/Security light LED , 45 Watt energy savings and environmental friendly long life versatile pressure die cast aluminium fittings including necessary brackets made of 32/ 40 mm bore GI pipe 1.2m long bend to shape and MS clamps complete connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.
Supply and Fixing in repair Sheet metal enclosures for DB's with 200 Amp rated bus bar single door class IP-43 epoxy coated inside and outside 8 way SPN 240 volts complete all as specified and directed.
Supply and Fixing MCB single pole neutral (SPN) 240 volts, 40amp, 10KA (C-series) of approved make and cat part etc complete all as specified and directed.
Supply and Fixing MCB single pole (SP) 240 volts, 6 to 32 Amps, 10KA (C-series) of approved make and cat part etc complete all as specified and directed.
Sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed.. Note :- For payment purpose punned thickness shall be measured.
Brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.
1100 volt grade XLPE insulated heavy duty cable, 10 sqmm 2 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches including taking down existing cable etc complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.
Material and labour in replacement for Earthing complete with galvanised steel earth plate electrode 600mm x 600 mm x 6mm burried directly in ground (earth pit not less that 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to galvanised iron strip 32x6mm by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment / substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe, testing ,complete all as specified and directed..
M/S BHAT ENGINEERING WORKS
M/S SHEIKH FEROOZ AHMAD
SOFI CONSTRUCTIONS
M/S B A Traders
M/S RAFIQ AHMAD SOFI AND SONS
FIRDOUS AHMAD BABA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .