Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.0 CrAccepted-AOC | ₹2.0 Cr | 1 | Accepted-AOC OK |
| 2 | 2₹2.0 Cr+₹6.2 L (3.12%)Rejected-Finance H NO 1 SHASTRI NAGAR NR GOGRI PUR PHATAK HANSI ROAD KARNAL KARNAL HARYANA 132001 | KARNAL | KARNAL | HARYANA | 132001 | ₹2.0 Cr+₹6.2 L (3.12%) | 2 | Rejected-Finance L2 |
| 3 | 3₹2.0 Cr+₹7.0 L (3.53%)Rejected-Finance | ₹2.0 Cr+₹7.0 L (3.53%) | 3 | Rejected-Finance L3 |
| 4 | 4₹2.2 Cr+₹19.2 L (9.71%)Rejected-Finance | ₹2.2 Cr+₹19.2 L (9.71%) | 4 | Rejected-Finance L4 |
| 5 | 5₹2.2 Cr+₹20.4 L (10.3%)Rejected-Finance | ₹2.2 Cr+₹20.4 L (10.3%) | 5 | Rejected-Finance L5 |
Tender Value
Refer Docs
EMD Value
₹4.3 L
Closing Date
9 Feb 2022, 2:00 pmClosed
Chief Executive Officer
Karnal Smart City Limited
Construction of Multipurpose Hall at Phoosgarh Karnal under Smart City Mission
2022_HRY_206382_1
KSCL/CEO/2021-22/752
Open Tender
Civil Works
Works
180 days
Karnal
Please refer Tender documents.
2 documents required · 2 mandatory
₹15,000
₹4.3 L
28 Mar 2022
2 Feb 2022
9 Feb 2022
2 Feb 2022
9 Feb 2022
2 Feb 2022
Amount
Civil Works Supply and installation wilth all anchor bolts screws, of Galvalume Roof ,alloy coated product contain 55% aluminium,43.5% Zinc & 1.5% silicon by weight.350 MPA AZ 150 GSM,RPM coating top coat 18-22 microns & back coat 5-8 microns.total coated thickness 1.37mm & base material thickness 1.30 mm,with of each strip is of 914 mm, Material make Bhushan steel/Tata Blue scope steel/Dongkuk steel.arch top height of 6mm from top of column.installation will be done as per drawing and instruction by engineer in charge.
Electrical works Main Control Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required,Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels. Incomer :125A TPN MCB - 1NOS Outgoing : 25A TPN MCB - 2NOS & 40A DP MCB's - 6nos Indication lamps (RYB) with control MCB - 03 Sets Danger notice plate Make : As listed in UHBVNL
Cables :Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)3.5C x 35sqmm Al Ar cable
Cables :Supply of following size XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 4C x 10sqmm Al Ar cable
SITC of 40W LED Batten having Extruded aluminium housing fitted with Engg. Plastic end caps. With Opal diffuser.LED should be populated on FR4 PCB in which LED’s should be mounted & connection should be in series parallel.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)>=110lumens/watt, Minimum system Lumens 4400 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500K ±500K, CRI>=80, PF>=0.9,THD<10%, and Operating Temperature Range-10 deg C to +50deg C, IP20. Built in Surge Protection of 4KV and an operating Voltage Range of 140 to 300V AC,50Hz.The driver should be constant current driver.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Bajaj Cat. Ref.BCLAB SP 44L LED CW PC SD or Equivalent.
Supply of LED recessed Downlighter with a nominal system lumen output of 1200 lumens ±10% and a minimum system efficacy of 100 lm/W. The luminaire should have a color temperature of 5700K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF > 0.95. Built-in Surge protection of 2 kV,Maintenance of lumen output 50000 hrs.The luminaire housing should made of pressure die cast aluminium with a high efficiency diffuser.Bajaj Cat. Ref BZSLOS nxt 12L LED WH SD
Supply of recessed mounted LED 600x600mm fitting made of CRCA) sheet steel housing comprising of LED’s connected in series parallel, Opal diffuser fixed in separate white powder coated ,Opal diffuser frame is held in with housing by screws for easy maintenance. Fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt,,Minimum system Lumens 4800 lm ±10% Life of fixture 50000hrs@L70 Lumen maintenance, CCT up to 5700K±300K, CRI minimum 80, PF ≥0.95, THD <10% and an operating Voltage Range of 140 to 277V AC. Minimum Internal Surge Protection 2.5 kV. The fixture should comply with the other parameters as per IS10322 and specifications. Bajaj Cat. Ref BZSSQL 48W Gzi LED WH
SITC of recessed mounted LED 600x600mm fitting made of CRCA) sheet steel housing comprising of LED’s connected in series parallel,Opal diffuser fixed in separate white powder coated ,Opal diffuser frame is held in with housing by screws for easy maintenance. Fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, ,Minimum system Lumens 3600 lm ±10%Life of fixture 50000hrs@L70 Lumen maintenance, CCT up to 5700K±300K, CRI minimum 80, PF ≥0.95, THD <10% and an operating Voltage Range of 140 to 277V AC. Minimum Internal Surge Protection 2.5 kV. The fixture should comply with the other parameters as per IS10322 and specifications. Bajaj Cat. Ref BZSSLL 36W LED WH i
Supply of 40W LED industrial Weatherproof Batten having Extruded aluminium housing fitted with end caps. Luminaire should be Completely prewired with accessories up to terminal block and fixture should have minimum efficacy at System level (Not Chip Level)>=120lumens/watt, Minimum system Lumens 4800 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500K ±500K, CRI>=80, PF>=0.9,THD<10%, and Operating Temperature Range-10 deg C to +50deg C, IP65,IK07. Built in Surge Protection of 4KV and an operating Voltage Range of 140 to 300V AC,50Hz.The driver should be constant current driver. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Bajaj Cat. Ref.BI PC 40W Pro LED SD or Equivalent.
SITC of 12" (300mm) Cabin fan.
SITC of 300mm swepp Light duty exhaust fan with metal blades etc complete
SITC of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete.
SITC of 25A Metal clad sockets for 2TR Air conditioner
SITC 750mm Sweep 250 W, 3 Blade Industrial type wall mounted fan
Supply and installtion of 60W Streetlight to be mounted on 6mtr poles having Epoxy powder coated pressure die‐cast aluminium housing, Weatherproof gaskets should be provided for LEDs and control gear compartments. Luminaire should be suitable for Side entry mounting for max. 38mm OD pipe bracket. The LED driver access should be from top for easy maintenance. LEDs should be provided with non‐yellowing modular secondary lens optics .LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)>=120lumens/watt, Minimum system Lumens 7200 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 5665K ±355K, CRI>=70, PF>=0.9,THD<10%, and Operating Temperature Range-5 deg C to +45deg C, IP66. Built in Surge Protection of 4KV & external surge protection of 10kVand an operating Voltage Range of 140 to 270V AC,50Hz.Luminaire Weight should not exceed 1.5kg.The driver used is specially designed to have built‐in surge voltage, open/short circuit protections. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Bajaj Cat. Ref.ENXT P 72L WH CR PC SD /Surya/VAK/HPL
O&M Works Mali cum cleaner Cum Sweepar, Maintenance of fine grass lawn for one year including fertilizer application, DAP @ 20gm/sqm, urea 40gm/sqm, watering, weeding, top dressing with good earth and manure mixture 2:1 @ 0.01cum per sqm, maintaining fine level, regular mowing and removal of rubbish with all lifts and leads,Maintenance of shrub for one year including weeding, hoeing, plant protection, watering from Deptt. source, application of 10 ml chlorpyriphos four times(as and when required) in a year , 0.0289cum FYM each, 20 gm urea and 20 gm DAP twice, replacement of casualty etc. with same species and same age of plant.with equipment and all maintance complete.
Bidder Name
Amount
Mehta and company(GSTN-06AAMFM2101J1ZJ)
m/s sharma enterprises(GSTN-NA)
Ved Parkash Contractor(GSTN-NA)
Ramniwas Jangra Contractor(GSTN-NA)
JKSS Developres LLP(GSTN-NA)
m/s sharma enterprises
JKSS Developres LLP
Mehta and company
Ramniwas Jangra Contractor
Ramniwas Jangra Contractor
Ved Parkash Contractor
Mehta and company
m/s sharma enterprises
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .