REPAIRS TO INTERNAL WIRING, OVERHAULINF OF CEILING FAN, EXHAUST FAN, GEYSER AND CONVERSION OF EXISTING FLUORESCENT LIGHTS INTO LED LIGHTS ETC TO CERTAIN BLDGS AT MIL STATION BHUSAWAL UNDER GE (SOUTH) AHMEDNAGAR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, bell push, holders, ceiling roses, pendants, regulators, sockets etc but excluding DBs, light fittings etc and making good disturbed surfaces of walls, floors etc. and matching with existing surface all as specified and as directed.

M & L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. (Contd/..)

Item No 2 Contd/... fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch . NOTES:- 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2.wiring shall be done as per complaints received from user only on reqired basis it is not necessary to do whole wiring of any whole bldg.3. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per serial item No. 2 here in before but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per serial item No. 2 here in before but on independent board.

All as per serial item No. 2 here in before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No. 2 here in before but for one light point controlled by 2 way switches.

All as per serial item No. 2 herein before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase,Neutral and earth for one 15 Amp, 6 pin socket on independent board.

S&F switch piano, flush button, 5 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed.

S&F socket outlet, flush type, 3 pin, 6 Amp, multipurpose, 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, flush type, 5 pin, 6 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 6/16 Amps, 230V, AC. all as specified & as directed.

S&F lamp holder, angle/ batten type, PVC/Polycarbonate type with back plate, suitable for batten fittings all as specified & as directed.

S&F ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified & as directed.

S&F bell push, flush type, 5 Amp, single pole, 230 volts, white finish all as specified & as directed.

S&F switch piano, flush button, 5 Amp, single pole, 2 way, 230 volts, white finish all as specified & as directed.

S&F fan regulator, step type, electronic on existing phenolic laminated sheet, 5 step, socket type, 230 volts, 450 watts, suitable for ceiling fan 1200/1400mm sweep all as specified & as directed.

S&F bell, AC, 230 volts, single phase complete all as specified and as directed.

S&F modular switch one way, 6 Amp, one module, 230V all as specified and directed.

S&F modular bell push, 6 Amp, one module, 230V all as specified and directed.

S&F modular socket, 6A, 2-3 pin combined 2 module, 230V all as specified and directed.

S&F modular switch one way, 16 Amp, one module, 230V all as specified and directed.

S&F modular socket, 6A/16A, 2-3 pin combined 2 module, 230V all as specified and directed.

S&F modular fan Regulator, 120 watt , 2 module complete all as specifed and as directed.

S&F modular cover plate frame, 2 module complete all as specifed and as directed.

S&F modular cover plate frame, 3 module complete all as specifed and as directed.

S&F modular cover plate frame, 4 module complete all as specifed and as directed.

S&F modular cover plate frame, 6 module complete all as specifed and as directed.

S&F modular cover plate frame, 8 module complete all as specifed and as directed.

S & F square profile LED lighting fixture with extruded polycorbonate,environmental friendly,energy efficient ready to use pack LED Tube light fitting 20 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and directed by Engineer-in-charge .Make:HAVELLS COMPY VIZON Cat No LHEXARP7SN1W020 or equivalent makes CG/Philips/wipro/Jaguar.

Supply and Fixing in replacement LED Tube rod of capacity 20 watt LED light source 6500K With uniform light output complete with all accessories . Make - Havells Cat Part No MAXOLED(TUBE) LHLDDCXCML8Q020or eqvlnt as Philips/ CG/ Wipro/Jaguar .

S&F Lumeno LED Bulb 10 Watt (Cool day light) having colour temp 6500 K and lumen output 900 suitable for B-22 type to fix on batten holder and wall light etc complete all as specified and directed by Engineer-in-charge. Make:- Havells cat No LHLDEUEEML8R010 or Equivalent make:CG/Philips/Wipro/Jaguar.

SS & F square profile LED lighting fixture with extruded polycorbonate,environmental friendly,energy efficient ready to use pack LED Tube light fitting 10 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and directed by Engineer-in-charge. Make:HAVELLS E-LITE LED PRIDE PLUS NEO Cat No LHEXACP5IN1W010 or equivalent makes CG/Philips/wipro/Jaguar.

S&F in repairs, 600 mm x 600 mm size, recess mounted LED luminaire of capacity 36 watt, with driver, for soft glare free light, AC 230 volt complete with all acessories and connections from ceiling rose to light fittings, complete all as specified & as directed.

S&F in repairs, 210 mm x 210 mm size, flat panel square fixture, slim,compact, aluminium die cast lit panel, recess mounting 1 x 18 watt, 230 volt with opal diffuser and sepatate electronic driver, LED light source 6500K with uniform light output, with all accessories including tconnections from ceiling rose to light fittings complete all as specified & as directed. Make :- Havells Cat Part No OCTANE LED PANEL SQUARE Item Code LHEBAEP71Z1W018 or equivalent model of make Philips / Jaquar/ Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

S&F in repairs, 110 mm x 110 mm size, flat panel square fixture, slim,compact, aluminium die cast lit panel, recess mounting 1 x 6 watt, 230 volt with opal diffuser and sepatate electronic driver, LED light source 6500K with uniform light output, with all accessories including tconnections from ceiling rose to light fittings complete all as specified & as directed. Make :- Havells Cat Part No OCTANE LED PANEL SQUARE Item Code LHEBAEP71Z1W006 or equivalent model of make Philips / Jaquar/ Crompton/ Halonix/ Century LED/ Wipro/GE/Luker

M & L for sub main wiring with 2 runs of 10 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 10 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black)2.Three runs of 10 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

M & L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black)2.Three runs of 6 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

M & L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black)2.Three runs of 4 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

S&F in repairs, sheet metal enclosures with plug socket, single pole and neutral with two pin and earth plug with one MCB of 20 Amps (SP) complete all as specified and as directed. Make- Indo Asian/ Standard/ Legrand/ Schenider/ Havells

S&F in repairs, MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, MCB SPN, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 8 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 200 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 4 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 200 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), Tripple pole and neutral, 415 volts, 4 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 200 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs ISOLATOR TPN, AC 415 V, 63 amps, 10 KA capacity ,'C' series, making connection with suitabl size of copper lugs etc complete all as specified and as directed.

S&F in repairs, security light fitting of building with single piece new generation energy savng and environmental friendly, long life, LED 30W, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia, fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminium cable all as specified and as directed.

M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

S&F in repairs, PVC insulated, sheathed cable with stranded aluminium conductor of size 6 sqmm, two core complete all as specified and as directed.

S&F in repairs, PVC insulated, sheathed cable with stranded aluminium conductor of size 4 sqmm, two core complete all as specified and as directed.

Supply and fix in replacement 15 watt post top lantern new generation, energy saving, environmental friendly, long life aesthertically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source and IP-65 protection complete all as specified and as directed.

S & F gate light made up of high grade unbreakable polycarbonate material suitable for retrofit 1x7 W LED Lamp (B22 base) - Moon 150.Make:Havells MOON (OPAL) Cat no LHFXBON1TN5Q008.or equivalent makes CG/Philips/wipro/Jaguar.

S & F gate light made up of high grade unbreakable polycarbonate material suitable for retrofit 1x20 W LED Lamp (B22 base) - Moon (PRISMAT IC). Make:Havells MOON (OPAL) Cat no LHFXBON1TN5Q014.or equivalent makes CG/Philips/wipro/Jaguar.

Taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size and greasing ball bearing with specified quality grease ,broken canopy sets,rubber reel,connector block,capacitors,fan blades etc and re-assembling the ceiling fan as a one unit , complete all as specified. Notes:- (a) Spares/accessories required for replacement shall be measured and paid sepratley as supply only under respective items of BoQ. (b) T&P required for repair/ maintenance such as Spaners, manpower etc, shall be included in the quoted rate of this item.

Taking down, strip opening, cleaning all parts and packing of Exhaust fans of any make and size and greasing ball bearing with specified quality grease and re-assembling the Exhaust fans as a one unit, complete all as specified. Notes:- (a) Spares/accessories required for replacement shall be measured and paid sepratley as supply only under respective items of BoQ. (b) T&P required for repair/ maintenance such as Spaners, manpower etc, shall be included in the quoted rate of this item.

Taking down, strip opening, cleaning all parts and packing of Table/cabin/Air circulating fan/ wall mounting fan of any make and size and greasing ball bearing with specified quality grease and re-assembling the Table/cabin/Air circulating fan/ wall mounting fan as a one unit and fixing Table/cabin/Air circulating fan/ wall mounting fan in position and re-commissioning the same including making electric connection complete all as specified and directed. Notes:- (a) Spares/accessories required for replacement shall be measured and paid sepratley as supply only under respective items of BoQ. (b) T&P required for repair/ maintenance such as Spaners, manpower etc, shall be included in the quoted rate of this item.

Taking down from site or collecting from E/M yard,unserviceable ceiling fan 1200 mm sweep any make with blades,transporting to local workshop,opening,cutting out complete copper winding,cleaning with kerosene oil/diesel/terpentine oil and dried out,rewinding with new super enamelled copper wire of suitable size and guage and number of turns as recommended by the respective manufactures,varnishing and heating the winding including providing paper paper insulation (cuff/strip) replacing unserviceable providing paper insulation replacing unserviceable/missing spare parts, repacement of suitable ball bearing,2.5 mfd capacitors,painting with super enamelled heat resistance synthetic white paint and writing the MES number with black paint etc and fixing the stator in rotor properly aligned and reasembling ensuring right DOR ,Speedy and noiceless running and depositing in E/M Yard and hanging at site in position complete all as specified and directed by Engr-in-Charge.

All as per srl item No 56 here-in-before but ceiling fan any make upto 1400mm Sweep.

All as per srl item No 56 here-in-before but exhaust fan any make upto sweep 300mm Sweep.

All as per srl item No 56 here-in-before but exhaust fan any make having sweep more than 300mm and not more than 450mm complete all as specified.

All as per srl item No 56 here-in-before but Table/Air circulating/ cabin/ wall mounting fan any make any sweep.

Supply only of canopy (top and bottom) of ceiling fans any make / size with canopy of matching colour.

Supply only of rubber reel with nut, bolts, split pins etc of ceiling fan with rubber reel heavy duty for hanging fan.

Supply only of down rod with clamps etc of ceiling fan with down rod of 15mm bore medium grade GI pipe 0.45 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality all as per specified and directed by Engineer in charge..

Supply only of down rod with clamps etc of ceiling fan with down rod of 15mm bore medium grade GI pipe 0.6 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality all as per specified and directed by Engineer in charge..

Supply only of down rod with clamps etc of ceiling fan with down rod of 15mm bore medium grade GI pipe 1.5 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality all as per specified and directed by Engineer in charge..

Supply only of connector block of ceiling fan of suitable size of approved quality.

Supply only of capacitor of ceiling fans with capacitor having capacity 2.5mfd, 240 Volts.

Supply only of blade of ceiling fan of any make with aluminium blade duly painted of sweep 1200mm including provision of screws etc fixing purpose complete all as specified and directed by Engineer -in-charge.

Supply only of blade of ceiling fan of any make with aluminium blade duly painted of sweep 1400mm including provision of screws etc fixing purpose complete all as specified and directed by Engineer -in-charge.

Supply only of Replacement of cable/wire for connection of fan with flexible copper cable 2 core.

Taking down carefully water Geyser 25/50 ltrs capacity by unscrewiring nuts bolts, water inlet/outlet pipes from walls/foundation complete including refixing in position after carrying repairs like change of suitable geyser element,themostat,inlet outlet pipes,16 Amp plug top,replacement of burnt wire,safety valve,non return valve,inner and outer tank,sloving geyser leakage problems etc. including making connection to the water inlet, outlet pipe, electric connection and testing complete all as specified and directed by Engineer-in-charge. Notes:- (a) Spares/accessories required for replacement shall be measured and paid sepratley as supply only under respective items of BoQ. (b) T&P required for repair/ maintenance such as Spaners, manpower etc, shall be included in the quoted rate of this item.

Prepairing the old painted surfaces by scraping and rubing of old painted surface of 25/50 ltrs capacity geysers complete including painting with one thick coat of synthetic enamel white paint by spray gun complete including proper drying including writing MES No all as specified and directed by Engineer-in-Charge

Supply only flexible PVC insulated three core copper conductor cable from geyser to 15 amp socket/ Metal clad complete all as specified and directed by Engineer - in - Charge.

Supply only of geyser element 1.5 KW rubber gasket type including rubber gasket and suitable for existing geysers all as sepecified and directed by Engineer- in - Charge.

Supply only of geyser element 2 KW rubber gasket type including rubber gasket and suitable for existing geysers all as sepecified and directed by Engineer- in - Charge.

Supply only of geyser safety valve (Pressure release valve) complete suitable for vertical type geyser all as sepecified and directed by Engineer- in - Charge

Supply only non return valve made out of brass fixed in vertical position of size 15mm dia all as sepecified and directed by Engineer- in - Charge.

Supply only of indicator lamp 220 Volts AC as existing earlier suitable 25/50 ltrs capacity of geyser.

Supply only of ISI marked PVC connection pipe complete with brass end terminal size 30/45 CM long.

Supply only of thermostate switch pointer type/therocutter suitable for 25/50 ltrs capacity geyser with adjustment knob complete all as specified and directed by Engineer-in-charge.

Supply only of replacement plug top 3 pin 15 Amps AC 230 volts.

M/S J J ENTERPRISES

CHAUDHARY AND ASSOCIATES