WBPWD/SSE/SWEC/NIQ80/2025-26/ 2nd Call

Supply , Installation , Testing & Commissioning of 08 (Eight) Person capacity- Gearless Passenger MR lift( with Machine Room) (Simplex System Operation) with stainless steel body, V3F controller panel and another following specification :- (Make- Otis/ Kone/ Schindler/ Thyssen Krupp/ Bharat Elevatot Co. Ltd./ Mukherjee Service Agency/ Electromec/ United Elevator/ Escon/ Johnson) TYPE : Passenger CAPACITY (Kgs) : 08 PERSONS 544 KGS. SPEED (MPS) : 1 MPS. Height : Ground floor to 3rd floor about 13 m approx.(Agency should visit before attend the tender) STOPS : 4 stops & 4 openings, Single entrance car (all opening on the same side) CONTROLLER TYPE : Microprocessor based DRIVE : VVVF (Closed loop) Drive MAIN POWER SUPPLY : 400/415 Volts (3 Phase AC) Auxiliary Supply : Single-phase 220 V, 50 Hz OPRATION : Full collective operation(With/without attendant) CAR GROUP : One car (simplex) MACHINE : PM Gearless (Located above shaft) Main rope : As per manufacturer's standard.

CAR FINISH: Rear Mid Panel = Stainless Steel (SS 304) Hairline finish. Rear Corner Panels = Stainless Steel (SS 304) Hairline finish. Side Panels = Stainless steel (SS 304) Hairline finish. Front Panels = Stainless steel (SS 304) Hairline finish. FLASE CEILING TYPE : CD-41 FLASE CEILING FINISH : Stainless steel (SS 304) Hairline finish. VENTILLATION : Cross flow fan HAND RAILS : Stainless Steel (SS 304) Mirror Finish Handrails on rear car panels FLOORING : Vinyl Tiles CAR DOOR FINISH : Stainless steel (SS 304) Hairline finish. LANDING DOORS FINISH : Stainless steel (SS 304) Hairline finish. FIRE RATED DOORS : Fire rating -60mins HOISTWAY DIMENSIONS (W x D - mm) : 1900 mm (W) x 2000 mm(D) CAR DIMENSION inside (W x D x H - mm) : 1200 mm W x1300 mm D x 2200 mm H CAR HOISTWAY DOOR TYPE : COPD

DOOR OPENING (W x H - mm) : 800 mm W x 2000 mm H DOOR OPERATOR : Automatic power operated door with full length Photocell assembly light curtain sensor. COP : Gien Buttons in Stainless Steel Hairline finish CAR POSITION : Digital car position indicator, car travels direction indicator in car & at all landing with call registration indicator. HALL FIXTURES : Braile micro push button with dot matrix display HALL FIXTURE FACE PLATE : Stainless Steel Hairline Finish HALL BUTTON ARRANGEMENT : Hall Button with up/dn at intermediate floor and ony up/dn at lowest/upper most floor.

STANDARD FEATURES : ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others. Anti- nuisance Car Call Protection, Independent Service (for Duplex only), Overload Device , Nudging, Emergency Firemen's Service, Emergency Car Light Unit, Infrared Curtain Door Protection , Door time Protection, Emergency Alarm Button, Extra Door time of Lobby & Parking , door Open/Close Button, Manual Rescue Operation , Belt Inspection drive, Auto fan Cut Off SAFETY FEATURES: a) Over Speed Protection b) Single Phase Protection c) Over Load Protection d) Phase failure Protection e) Terminal Limit Switch f) Emergency Stop Switch g) Inter Locking Switch h) Reverse Phase Protection i) Relocking arrangement from Loading. OPTIONS REQUIRED : Automatic Rescue operation, Voice Synthesizer, intercom. N.B. (i) Rates should be including with minor civil works, wall/floor cutting for making holes, chiseling etc and allied mending good the damages to the original finish with all necessary arrangements. (ii) The rate quoted by the manufacturer should be inclusive of cost for providing 2 years DLP after completion of 1 year of initial commisioning (iii) Necessary MS member e.g, angel iron, MS Channel, Bracket etc. as required to be provided by the manufacturer. (iv)The Agency must procure the materials from the Manufacturer/ OEM or from their authorised sales channel so that the standard warranyt/ support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Please Enable Macros to View BoQ information