Provision of Shed and other Misc Work at SBE Lucknow

Amount

Laying and Jointing PVC Pipe. Heading

Concrete with 4cm guage I class brick ballast, coarse sand and cement in proportion of 10:5:1 in foundation & under floors including cost of all materials, labour T&P etc required for proper completion of the work. .

First Class half brick work in 1:6 cement and coarse sand mortar in super structure including cost of all materials, labour T&P etc required for proper completion of the work.

Mild Steel or Iron work in heavy sizes such as trusses built up gates , door frames ,record, racks roof work gates etc. wrought to required from including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contract.

12 mm thick plaster with cement mortar consisting of 1:6 minimum thickness not less than 10 mm including cost of all materials, labour T&P etc required for proper completion of the work.

Painting or varnishing iron work in small areas or wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.

As in item 1.05 above but for every coat after first coat.

Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.

Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work.

Same as in item No -08 above but for every coat of additional APEX or equivalent brand weather coat paint .

Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra)

Same as above in Item No-10 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint.

Removing dry or oil bound distemper water proofing cement paint and the by scrapping , sand papering & preparing the surface smooth including necessary repairs to scratches etc . Complete

Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm.

Supply and fixing 10 mm Polycorbonate sheet including supply of all materials , labour T&P etc required for proper completion of the work

Supply & Fabrication of MS CNC Jali 1.5 mm thick cutting and design as approved by EIC.

M/S KALPANAM CONCEPTS

M/S OM SERVICES