CE-MTPS-I-SE-ES-EM-I-OT 56-2024-25

Amount

Charges for Dismantling and assembling of 75KW Heater Drip pump motor for winding lead end connection replacement work.

Charges for Provision of winding Lead end connection by 50 Sq.mm copper cables with round type copper lug including brazing work and necessary insulation work. 75KW Heater Drip Pump Motor, Make: GEC, Sl.No.84561067/06

Charges for releasing the motor from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after end termination work, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor and including coupling, alignment and coupling the motor with the pump. (HCBP 2A & 2B)

Charges for Dismantling and assembling of 37 KW Hydrogen cooler booster pump motor for winding lead end connection replacement work

Charges for Provision of winding Lead end connection by 25 Sq.mm copper cables with round type copper lug including brazing work and necessary insulation work 3 Phase, 415 V, 37 KW Hydrogen Cooler Booster Pump motor 2A & 2B (make:CG, Sl.no:Sl.No.ADP50563) & (make:CG, Sl.no:Sl.No.ADP41746)

Charges for Rewinding of 1.2KW GT Radiator cooling fan motor (Bearing will be contractor scope)

Charges for complete rewinding of single phase LT motor with class F insulation by dismantling the motor releasing the worn out coils, cleaning the stator slots, rewinding of coils applying insulation varnish, replacing the bearings, assembling the motor and end termination.510W- 4Nos. & 410W - 4 Nos. (Bearing will be contractor scope)

Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings, providing sleeves in the end cover of one side for 1.2 KW - Radiator cooling fan motor (If necessary)

Charges for Painting with 2 coats for Radiator cooling fan motor, Exhaust fan motor.

50 Sq.mm Copper cable (HDP motor)

50 Sq.mm Copper round Lug (HDP motor)

Copper flat suitable size for HDP and HCBP-2A & 2B

Insulator (HDP, HCBP-2A & 2B)

25 Sq.mm Copper cable (HCBP-2A & 2B)

25 Sq.mm Copper round Lug (HCBP-2A & 2B)

Fiber glass sleeve (HDP, HCBP-2A & 2B)

Bearing 6206 ZZ (SKF make) for RCF motor-DE

Bearing 6304 ZZ (SKF make) for RCF motor- NDE

Bearing DE 6204 ZZ (SKF make)Ex. Fan mtor, 500W - DE & NDE

Bearing 6201 ZZ (SKF make) Ex. Fan mtor, 410W - DE

Bearing 6202 ZZ (SKF make) Ex. Fan mtor, 410W - NDE

Terminal block suitable for Ex. Fan motor

Silver brazing rod

Super enameled copper wire (F class) Standard make. (RCF motor - 4 Nos.=10 kg) Each motor 2.5 Kg

Super enameled copper wire (F class). Standard make. (Ex. fan motor - 8 Nos.=17.6 kg ) Each motor 2.2 Kg

2.5 Sq.mm Copper cable for end termination of Radiator cooling fan motor. (3 mtr per motor ie., 4 motor = 12 mtrs)

2.5 Sq.mm Copper cable for end termination of Ex. fan motor - 8 Nos. (1.5 mtr per motor ie., 8 motor = 12 mtrs)

Terminal block suitable for RCF motor

Class F insulation sheet for inter winding separation. 1/4 kg each motor (RCF motor-4 Nos and Ex. fan motor -8 Nos)

Light Grey Enamel paint for RCF motor and Ex. fan motor

Thinner

Dr. Beck’s Insulation varnish (Each 0.5 Ltrs. For Radiator cooling fan motor 4 Nos & Exhaust fan motor 8 Nos and each 1 ltr. for HDP Motor-1No., HCBP motor-2 Nos.)

End Sleeves for DE/NDE covers for RCF motor - 4Nos.. (if necessary)

Cost of consumables

To and Fro Transport Charges

Less:Cost of released copper wire (Radiator cooling fan motor -4 Nos.)

Less:Cost of released copper wire (Exhaust fan motor 500W - 8 Nos.)