Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹72,420
Closing Date
24 Jun 2026, 11:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
LP
5 conditions · 2 needing a document upload
Entire/Bulk order will be placed on the OEM or its authorized dealer having proven performance (Agent shall give authorization certificate along with the offer).
Sample is required to approve by the consignee before bulk supply as per description
Purchase Preference & Other Benefits To Micro And Small Enterprises MSE will be applicable as per para 1.11 of the attached bid document.
Bidder will have to submit their catalogue of the offered product with complete description with dimension
Only Class-I and Class-II local supplier as defined under the order (Revised Public Procurement (Preference to Make in India), Order -2017), shall be eligible to bid irrespective of purchase value except for the items which are restricted to be procured from Class-I local suppliers only, details mentioned in the para 2.24 of attached bid document. Vendors who do not qualify to be Class I or Class II , as the case may be, local suppliers should not quote in the tender as their offers shall not be considered for any ordering. Further, for the for the items restricted to be procured from Class-I local suppliers only (list of such items mentioned in para 2.24 where the Ministry of Railway is the nodal ministry), vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railway shall not be liable for any loss or damage caused to the vendor. Para No. 2.24 of the attached bid document shall be applicable
27 conditions
The bidder confirms that rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms of acceptance, and such terms quoted anywhere else shall be ignored. ( Denial of the concision recommended)
Certificate for Compliance of Rule 144 (xi) in the General Financial Rules (GFRs), 2017. I /we have read the Orders regarding restrictions on procurement from a bidder of a country which shares a land border with India vide Order Ref. F. No. 6/18/2019-PPD dtd. 23.07.2020 (containing office Memorandum, order (Public Procurement No. 1) & Order (Public Procurement No. 2). Order Ref F. No. 6/18/2019-PPD dtd. 23.07.2020 (Order (Public Procurement No.3) issued by Joint Secretary (PPD), Department of Expenditure, Ministry of Finance, Gol and OM No. DPE/7(4)/2017-Fin. Part-I dtd. 30.07.2020 issued by the Director, Dept of Public Enterprises, Gol; I/ we hereby certify that I/ we are not from such a country and are eligible to be considered.
In reference to clause above in case the bidder is from a country which shares land border with India vide order reference mentioned in clause 8.1 above, the following confirmation to be provided by the bidder:- I/ we have been registered with the Competent Authority as mentioned in the above Govt. Order dt. 23.07.2020. I/ we hereby certify that, we fulfil all requirement in this regard and are eligible to be considered (where applicable, evidence of valid registration by the Competent Authority shall be attached)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items.The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please indicate [Y/N] whether you are interested in availing the benefits available to Micro and small Enterprises[MSEs] of their participation in Govt. Procurement in reference to the Ministry of Railway letter No.2010/RS[G] /363/1 dated 13.02.2019 as mentioned in bid document. If yes, Please attach the requisite registration certificate specifically for the tendered item for the same application issued by appropriate agency. Also indicate whether MSE's is owned by SC/ST/WOMEN/OTHER. The requisite certificate is to be uploaded with tender document. Please note that in absence of the requisite certificate uploaded/ submitted along with the offer , such benefits may not be extended.
EMD and SD as per Clause 1.18 & 1.19 of NER-attached bid document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Uttar Pradesh · 545 Numbers total
Office Furnitures
80265440
80265440
Open - Indigenous
Goods
Uttar Pradesh
₹0
₹72,420
24 Jun 2026
20 Jun 2026
3 items · 545 Numbers total
OFFICE TABLE Size 5x3 Feet. Supplying & Placing executive table in completely knock down c onditions that is to be assembled at site. The construction of the main table shall be free standing structur e constructed with the help of minifix dowels and pins. The table top shall be made up of 18mm thick partic le board with approved laminate and finish as per approved shade. The profile shall be in rectangle shape e dges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supp orted over particle board base gable end. The end wall of the table on the side shall be topped by gable en d. It should be made up of 18mm thick particle board and profile shall be in linear shape with front and bac k full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18m m thick modesty panel which provide structural support for the table. It shall be 18mm thick particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base t o avoid scratches on the floor. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 6 50mm. The pedestal shall be made up of Prelaminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm Thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. o f drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single k ey. The pedestal shall be mounted over 50mm injection moulded nylon castor. [ Warranty Period: 30 Mo nths after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| OS/S/OPT/IZN, NER | Uttar Pradesh | 36.00 Numbers |
| Total | 36 Numbers | |
Revolving chair high back. (. Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed comme rcial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 45kg/m %B3 in seat and 45mm thick having density 35Kg/m%B3 in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The back and base of chair shall be supplied with polypropylene/ABS mo ulded cover and the backrest shall be made by keeping the natural curvature of the spine which helps to pr ovide lumbar support. The seat and back shall be arrested together with 50-60%B5 thick powder coated HR steel spine and the armrest shall be used black integral polyurethane arm with metal insert completely join t with seat and back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using th e lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. T he pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle dia . 700%B115 mm and fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection mo ulded in black 30% glass filled nylon, confirming to ANSI/BIFMA Standards X5.1-2011 tested to perform 98,0 00 cycles with 250lbs load. The seat size shall be 485%B110 mm(W) X 450%B110 mm(D) and back size sh all be 490%B110 mm(W) X 610%B110 mm(H) from seat.Seat height 460%B110 mm, overall height shall be 1060%B110 mm, overall depth = 620%B110 mm and overall width (Arm) = 600%B110 mm, Overall base di a. 760%B110 mm.) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| OS/S/OPT/IZN, NER | Uttar Pradesh | 151.00 Numbers |
| Total | 151 Numbers | |
VISITOR CHAIR. (Supplying & Placing Student/Training room Chair. The seat shall be made of 15mm thick hot pressed plywood upholstered with high resilience polyurethane foam 40mm thick having d ensity 32kg/m%B3 and the back shall be made of hot pressed plywood 12mm thick upholstered with high r esilience polyurethane foam (19+12)mm thick having density 23kg/m%B3. The same shall be upholstered with fabric tapestry 0.6mm thick and 235 GSM. The frame structure shall be supported by four legs made u p of MS/CRCA powder coated round pipe of 25mm X 1.5mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 410%B110 mm(D) X 415%B110 mm(W) and bac k size shall be 410%B110 mm(W) X 260%B110 mm(H) from seat. Overall height shall be = 770%B110 mm. ) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| OS/S/OPT/IZN, NER | Uttar Pradesh | 358.00 Numbers |
| Total | 358 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
DrawingSizeofSMOfficeTable.pdf DrawingSizeofSMOfficeTable.pdf
ATTACHMENT
DrawingSizeofSMOfficeTable.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].