Maintenance & Repair of Crematoriums/Burial Ground In Pulikeshinagara Constituency In East Zone

Maintenance & Repair of Crematoriums/Burial Ground In Pulikeshinagara Constituency In East Zone

Removing & Refixing stone slabs of drains and pointing in C.M (1:3) (Approved rate by Yelahanka Zone Dt: 18/06/2022)

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per d...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200 x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS ...

Providing Flush / Ruled/ Struck or weathered pointing Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including c...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing and laying Pre Cast Slab using 20mm and down size aggregate stone using clean seived approved sand including cost and conveyance of all materials, all lead and lift, labour charges of machin...

Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to ...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing and laying Sand - M-Sand

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

Providing and fixing pre cast solid cement concrete kerb stones made out of C.C. 1:2:4 with top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1:3 plaste...

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

8mtrs Height Pelican Orna Georgia Series With Artistic Arched Tubular Design Having Inventive Style, Solid Galvanized Iron And Anti Corrosive Paint Finish, With The Dimension Of base plate dia 300mm,b...

Royal Bench:- Made out of Sadarahalli Grey stone with hand support with machine cutting top slab with 4 line finishing with arch design neatly carved and fixing with 150mm slab 15'x45'x150'-45'

Fabricating, providing and erecting in position Hot dip galvanised Gate. Using 72 72 4.8mm Sq. GI Pipe frame with 1op pipe bending in heavy duty hydraolic press with sand packing and hot bending to fo...