GE/H-79/2024-25 PROVN OF CERTAIN B/R MINOR WORKS AT AHRR UNDER GE E/M RR HOSPITAL DELHI CANTT-10

Amount

Excavating in trenches in any type of soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out, in Soft/loose soil complete all as specified & directed by Engr-in-Charge.

Surface dressing n exc 15 cm deep in hard/dense soil complete all as specified & directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil, complete all as specified & directed by Engr-in-Charge.

M&L for cement concrete 1:2:4 type B2 (40mm graded aggregate) as in foundations,filling and mass concrete for including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified & directed by Engr-in-Charge.

M&L for PCC 1:3:6 C-2 as in concrete bed to drain pipe incl packing under and haunching against the all sides of pipe 150mm bore, complete all as specified & directed by Engr-in-Charge.

S&F cast iron pipes 150mm bore with spigot and socket ends centrifugally cast. Class A, in any length, laid in trenches complete all as specified and directed by Engr-in-Charge.

S&F cast iron bends (any type, radius and angle) upto 150mm bore tapers any type, (straight, bend, increasing, decreasing or double socket etc.) collars, caps and plugs complete all as specified and directed by Engr-in-Charge.

M&L for lead wool joint for cast iron pipes (spigot and socket type) and fittings upto 150mm bore complete all as specified and directed by Engr-in-Charge.

S&F 150mm dia sluice valve Class PN 1.6 with flanged ends, any pattern complete all as specified and directed by Engr-in-Charge.

M&L for cutting into existing manholes for connecting new drains of 150mm dia internal, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed by Engr-in-Charge.

S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides Fe-410-W(Gde?E-250) quality?B with one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint on newly steel surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified and directed by Engr-in-Charge.

S&F chain link MS galvanised fencing of size 3.20mm dia of wire and of 100mm mesh including line wires & provision of binding wire complete all as specified and directed by Engr-in-Charge.

S&F mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works complete, conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L for mild steel Fe-410(Gde.E-250) quality-A or Fe 290 (Gde - E-165) round bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

S&F mild steel plain black sheet 1.25mm thick covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed by Engr-in-Charge.

M&L for mild steel screw bolts (machine made) 5 to 10 mm neck dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed by Engr-in-Charge.

Supply, installation, testing and commissioning of hermetically sealed clean room single /double leaf door (swing type) of size 1500mm x 2100mm. Door shall be designed to fit flush into the wall panel system on both sides. Door shall be fabricated from SS 304 sheet. Standard 50mm panel shall have frame width of 100 mm and shutter width of 45mm with a sealed and PUFF insulated with 40kg/sqm density complete all as specified and directed by Engr-in-Charge. The following accessories shall be part of the door:- (a) Shutter Thickness: 45 mm thick (b) Stainless steel hinges (c) Stain less steel 'D' type of handles on pull side (d)Standard arm door closure (e) View panel size :400mmx600mmx5mm thick glass on both sides along with self adhesive tape and silicone sealant (f) Both side key operated locking arrangement (g) Automatic door bottom seal All as per ser items No. 2.00 here-in-before but point wiring for One light point controlled by two, two way switch complete all as specified and directed by Engr-in-Charge.

All as per ser items No. 21.00 here-in-before but size 1800mm x 2100mm complete all as specified and directed by Engr-in-Charge.

Supply fabricating and fixing aluminium door powder coated of extrusion aluminium section, vertical style of door shutter of size 85mmx44.45mmx1.5mm thick. Top, and bottom rail of size 85mmx44.45x1.5mm thick and fixing 3MM thick aluminium composite panel with aluminium beading and rubber gasket/beading as directed including provision of one mortice lock for aluminium door (each)and 2 nos of alminim hinges of size 100mm and two aluminium tower bolts of 200mm size for each door fixed with rawl plug and handles 200mm including making good of floor/wall to match the existing surfaces complete all as specified and directed by Engineer-in-Charge at site. Note:- ACP sheet shall be measured and paid seperately.

Supply only 3mm thick aluminium composite panel (ACP Sheet) to aluminium frame complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specied and directed by Engr-in-Charge.

M&L for reinforced cement concrete 1:2:4 Type B1(using 20 mm graded aggregate), as in foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specied and directed by Engr-in-Charge.

M&L for reinforced cement concrete of 1:2:4 Type B1 (using 20 mm graded aggregate), as in beams, cantilevers, lintels over 1.5m span complete all as specied and directed by Engr-in-Charge.

M & L for reinforced cement concrete of 1:2:4 Type B1 (using 20 mm graded aggregate), as in columns, complete all as specied and directed by Engr-in-Charge.

M&L for reinforced cement concrete of 1:2:4 Type B1 (using 20 mm graded aggregate), as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specied and directed by Engr-in-Charge.

M&L for reinforced cement concrete of 1:2:4 Type B1 (using 20 mm graded aggregate), as in chajjas complete all as specied and directed by Engr-in-Charge.

Form work to sides of concrete fdns, footings, bases of columns, raft and raft beams, sides and soffits of fdn and plinth beams and similar works in rough finished complete all as specied and directed by Engr-in-Charge.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc. work in rough finished square/ rectangular surfaces complete all as specied and directed by Engr-in-Charge.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for flat rough finished surfaces of concrete complete all as specied and directed by Engr-in-Charge.

Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar workn n.exc 200mm thick flat rough finished surfaces complete all as specied and directed by Engr-in-Charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with rough finished surfaces complete all as specied and directed by Engr-in-Charge.

Formwork to chajjas and similar items including edges flat rough finished surfaces of concrete complete all as specied and directed by Engr-in-Charge.

M&L for steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binging with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specied and directed by Engr-in-Charge.

All as per ser items No. 37.00 here-in-before but5mm dia and over and up to and including 10mm dia in stirrups spacers and binders complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:6, finished the surface fair and even complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:4, finished the surface fair and even complete all as specified and directed by Engr-in-Charge.

M&L for 5mm thick rendering on concrete ceiling surfaces in cement mortar 1:3, finished the surface fair and even complete all as specified and directed by Engr-in-Charge.

M&L for applying 1.5mm thick cement base wall care putty on plastered surface of wall and making the surface even & smooth for receiving distemper / paint of any description complete all as specified and directed by Engr-in-Charge.

M&L for applying 1.5mm thick cement base wall care putty on plastered surface of ceiling and making the surface even & smooth for receiving distemper / paint of any description complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of oil bound distemper complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior paint over a coat of alkali resistant priming paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper, complete all as specified and directed by Engr-in-Charge.

M&L for earth filling under floors or in foundations (except material) including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L for 100mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base, complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick cement concrete 1:2:4, type B-1 (using 20mm graded aggregate) to receive the top layer of tiles complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed by Engr-in-Charge.

M&L 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 450 mm x 300 mm x 7 to 8 mm thick (with multi colour combination in pattern as directed), set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-Charge.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC coloured sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube S&F in opening as per specification and drgs complete all as specified and directed by Engr-in-Charge.

S&F butt hinges, medium weight, cold rolled mild steel 100mm size complete all as specified and directed by Engr-in-Charge.

S&F 125 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 125mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engr-in-Charge.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium complete alloy complete all as specified and directed by Engr-in-Charge.

S&F aluminium window and ventilator shutters with powder coating (minimum thickness of powder coating 50 micron) of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21, 100mm long (2 no.), suitable handle (1 no.) complete all as specified and directed by Engr-in-Charge.

Supply only for 4.8mm thick froasted/ figured glass fixed with beading in aluminium frame complete all as specified and directed by Engr-in-Charge.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp complete all as specified and directed by Engr-in-Charge.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement, complete all as specified and directed by Engr-in-Charge.

S & F 75mm bore PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge.

S&F 75 mm bore PVC (SWR) reducer complete all as specified and directed by Engr-in-Charge.

S&F white vitreous china wash hand basin (flat back) of size 550 x 400 mm fixed on and including new brackets complete including 32 mm size brass chromium plated waste coupling, 75 mm long PVC waste pipe, chain and plug and porcelain stopper complete all as specified and directed by Engr-in-Charge.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.

S&F plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge.

S&F PVC low level flushing cistern, valve less, syphonic action type, double push bottom, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete all as specified and directed by Engr-in-Charge.

S&F white vitreous china urinal half stall type (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement and waste pipe complete all as specified and directed by Engr-in-Charge.

S&F urinal spreader of CP any colour for fixing with 15 mm dia pipe (minimum weight 60gms), complete all as specified and directed by Engr-in-Charge.

S&F 40mm dia and 75cm long PVC waste pipe including tail suitable for urinals etc, complete all as specified and directed by Engr-in-Charge.

S&F bib taps, cast copper alloy, fancy tyoe, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified and directed by Engr-in-Charge.

S&F Stop cock/angle valve fancy type, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F pillar taps, cast copper alloy, fancy type, chromium plated with capstean head screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge.

S&F tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F health faucet (ABS body) mild steel chromium plated for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F soap dish, brass CP any type and of suitable size, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engr-in-Charge.

S&F 500 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed by Engr-in-Charge.

M&L for hardcore of broken stones or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and directed by Engr-in-Charge.

M&L for hardcore of broken stones or boulders of guage exc 63mm but n exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and directed by Engr-in-Charge.

M&L for cleaning the existing roof surfaces including parapet and gutters, pipe mouths, etc of all foriegn matter such as fungus, moss, dust etc by wire brushing and applying water proofing treatment over roofs including comprising of the following, complete all as specified & as directed:- (a) Applying oil bound bituminous primer at the rate of 0.4 Ltrs/sqm as per IS 3384-1986 on prepared surfaces. Surfaces shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated. (b) Applying one coat of hot straight run bitumen @ 1.2 Kg/sqm of grade 30/ 40 confirming to IS-73 (Grade S-35) (c) Laying 3 mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyester matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75 mm at sides and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminous primer, all as per manufacturer's instruction including preparation of surface. Note: Water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. Contractor shall give 10 years guarantee for effectiveness of water prrofing treatment. 2.5% of workdone amount of this items shall be retained from the contractor payment for a period of 10 years reckoned from date of physical completion of the work or in lieu contractor may deposit bank FDR for the said tory for 10 years which shall be released by GE on the expiry of satisfactory completion fo 10 years period, complete all as specified and dircted.

M&L for sand cushioning over PCC surfaces, for laying of interlocking tiles and UG cables, spread, rolled and consolidated to gradient as required complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete coloured glossy finished interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N/Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid in path / hard standing, complete all as specified and directed by Engr-in-Charge.

M&L for road side kerb with factory made Precast cement concrete block of mix 1:2:4 type B-1 using 20 mm graded stone aggregate, not exc 100 mm in thickness, set in CM 1:3 including making joints with or without grooves (thickness of joints except at curve shall not be more than 5 mm), including making drainage opening wherever required, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new concrete surfaces and applying two coats of synthetic enamel paint over a coat of priming paint complete all as specified and directed by Engr-in-Charge.

S&F 150mm internal dia salt glazed stoneware pipes laid in trenches and jointed as specified including testing complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick work finished even and smooth without using extra cement using WPC as per manufacture instruction complete all as specified and directed by Engr-in-Charge. Note: WPC shall be paid separatetly.

Supply only integral water proofing compoud complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded aggregates), as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed by Engr-in-Charge.

M&L for factory made RCC cover with cover frame comprising of 75 mm thick cover, area of each cover slab exc 0.5 sqm but & not exc 1.00 sqm including provision of hot dip galvanized lifting hook for lifting overall cover with suitable size angle iron frame, RCC cover of M30 or higher grade concrete by vibro compression process, medium duty, confirming to IS-12592 including fixing on manhole, complete all as specified and directed by Engr-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm internal dia of pipe complete all as specified and directed by Engr-in-Charge.

Supply, installation, testing and commisioning of Sewage submersible cutter pump, Solid handling min 7 mm, 16 mtr head, 50 LPM, Single phase, CAT No. CCPM12(1PH)-16 in crompton or equivalent and suitable SITC fully automatic starter with level sensor and auto operation in SS enclosure complete all as specified and directed by Engr-in-Charge.

S&F Digital water level indicator with sensor, connecting electric cable, controller etc. connected with electric DB complete all as specified and directed by Engr-in-Charge.

S&F Gun-metal, globe or gate valve of 50 mm bore dia with iron wheel head, screwed both ends, ISI marked to IS:778-1984 Class-I screwed in bonnet, non rising stem screwed ferrule ends as per IS-554 complete all as specified and directed by Engr-in-Charge.

S&F cast iron non return sluice valve of 50 mm bore as per IS 5312 part 1 PN 1.6 including nuts, bolts complete all as specified and directed by Engr-in-Charge.

M&L for laying MS ERW pipe 50 mm bore heavy duty with all fitting i.e including tee, elbow reducer, etc. laid in trench, floor, walls, ceiling complete all as specied and directed by Engr-in-Charge.

M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate including demolishing the existing damaged foundation, provision of necessary form work/ brick work where required and finishing fair to the exposed surfaces, complete all as specied and directed by Engr-in-Charge.

S&F Submersible flat copper cable extra thick insulation of 2.5 Sqmm, 3 Core complete all as specied and directed by Engr-in-Charge.

Cutting holes through reinforced cement concrete slab of size minimum 600 mm x 600 mm for depth upto 7 cm and after finishing with PCC complete all as specified and directed by Engr-in-Charge.

S&F of well cap for delivery/suction pipe suitable for slab hole as per item No. 27 above complete with welding, screwed, locking arrangements with lock and machinary work having provision of cut out for passing of column/delivery pipe and fabricated from MS sheet 3 mm thick complete all as specified and directed by Engr-in-Charge.

S & F 25 mm dia GI pipe light grade for cable protection laid in trenches etc complete all as specifieed and directed by Engr-in-Charge.

Sub main wiring with 2 x 6sq mm single core PVC insulated but unsheathed FRLS cable size with multi stranded copper conductors, 1100 volts grade, IS-694 marked, with1 x4 sq mm of earth continuity conductor of similar type cable, all drawn-through and including suitable size rigid PVC medium grade ISI marked conduit and fittings/accessories, all fixed to the concealed in wall/ceiling complete all as specified and directed by Engr-in-Charge. (The runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length).

Supply and fix factory made sheet metal enlosure protection class IP-43 & IK 09 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, Double door type with acrylic cover, Single pole & neutral, 4 way with 200 amps rated bus bar single phase 240 V AC suitable for connecting SPN/SP MCB on out going complete all as specified and directed by Engr-in-Charge.

M & L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing for One light/fan/bell/exhaust fan point controlled by one switch. complete all as specified and directed for the followings :- Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates.

All as per ser items No. 117.00 here-in-before but One 3 Pin socket outlet 5 Amps on Independent board complete all as specified and directed by Engr-in-Charge.

All as per ser items No. 117.00 here-in-before but One 3 Pin socket outlet 5 Amps on same board complete all as specified and directed by Engr-in-Charge.

All as per ser items No. 117.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point complete all as specified and directed by Engr-in-Charge.

All as per ser items No. 117.00 here-in-before but with 4 sqmm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 20/25 Amps point and one single core 4 sqmm PVC insulated unsheathed copper cable as earth continuity conductor complete all as specified and directed by Engr-in-Charge.

S & F Modular Switch 1 way 16 A, 1 Module complete all as specified and directed by Engr-in-Charge.

S & F Modular Socket 6 / 16 A - 2/3 Pin combined 2 module complete all as specified and directed by Engr-in-Charge.

S & F Modular Switch 1 way 6 /10 A, 1 Module complete all as specified and directed by Engr-in-Charge.

S & F Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module complete all as specified and directed by Engr-in-Charge.

S & F of Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed by Engr-in-Charge.

S & F of Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, 240 Volts, complete all as specified and directed by Engr-in-Charge.

S & F LED tube light fitting 20 watt (CW), 4 feet long in extruded aluminium batten with high efficient LEDs available in milky diffuser and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K), PF>0.9 and Voltage rated 220V to 240V complete all as specified and directed by Engr-in-Charge.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

S & F MCBs, SPN, 40 Amps capacity, 240V, 10 kA with earth leakage protection complete all as specified and directed by Engr-in-Charge.

S & F MCBs, SPN,32 Amps capacity, 240V, 10 kA single pole with overload and short circuit protection complete all as specified and directed by Engr-in-Charge.

S & F MCB, SP, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed by Engr-in-Charge.

S & F MCB, SP, 6 to 32 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed by Engr-in-Charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty), 1100 Volts grade with stranded aluminium conductor of size 10 sqmm, 2 core complete all as specified and directed by Engr-in-Charge.

Supplying and laying un-reinforced precast concrete cable cover, LV, Type 1, flat, size 250mm x l50mm x 40mm complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB protected modular AC/Geyser box complete with and including 6 pin socket, plug top, modular cover plate, mini MCB SP 20/25 Amp, flush to wall surface capacity complete all as specified and directed by Engr-in-Charge.

Material and labour in replacement of Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit of suitable size, complete with all PVC accessories and 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete all as specified and directed by Engr-in-Charge. Note : 1. The two run of 6 Sqmm wire, one run of 6 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.

Supply & fixing of surface/wall mounted 20W LED batten. Luminaire made up of Extruded Aluminum Housing with PC diffuser. the luminiare should be with IP40 from dust. The LEDs used should have CRI ≥ 80 and CCT 6500K. Luminaire system efficacy of ≥ 110 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs .The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 2.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ. The luminaire Working Temp. range should be from 0⁰ to 50⁰C. The luminaire shall pass electric strength test. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards complete all as specified and directed by Engr-in-Charge.

Supply and fixing of surface/wall mounted 10W LED batten decorative type. Luminaire made up of Extruded Aluminum Housing with PC diffuser. the luminiare should be with IP40 from dust. The LEDs used should have CRI ≥ 80 and CCT 6500K. Luminaire system efficacy of ≥ 110 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs .The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 2.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ. The luminaire Working Temp. range should be from 0⁰ to 50⁰C. The luminaire shall pass electric strength test. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards complete all as specified and directed by Engr-in-Charge.

S&F GI tubing light grade 50mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc complete all as specified and directed by Engr-in-Charge.

Supplying laying, brick sub class 'B' common burnt laid in trenches for cable protection complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB, SP 5 amps to 32 amps rating IS-8828 marked, fixed in DB complete all as specified and directed by Engr-in-Charge.

Commercial Traders (BID ID -3277098)

HARICHAND CONSTRUCTION (BID ID -3271632)