15th Finance 2023 24 Tied Grand ISt Instalment

Amount

Dismantling, Clearing away and Carefully Stacking Stacking Materials Useful for re-use for any thickness of walls including all cost and conveyance of all machineries to site etc.,

Plain Cement Concrete 1:4:8 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.TNDSS NO: 30 V, VI (S3), VII-3.

Brickwork in cement mortor 1:5 mix using new Best II Class brick of size 9"x43/8"x23/4" From apporved quarry including cost and conveyance of all mterials to site Loading and unloading charge etc., complete

Plastering in C.M. 1 : 5 (one cement, five sand) to 12 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.

Supply and erection centering to sides and soffits including supports and struttings with necessary cross bracing of plain surface such as RCC slabs rectangle Beams all beams lintel etc., Centering for soffits upto 3m etc.,including all cost and conveyance to site etc.,

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.(Using Vibrator) TNDSS NO: 30 V, VI (S3), VII-3.

Supplying and fixing over the floors best quality of Scratch Ceramic Tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.

Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., etc. complete complying with standard specifications and as directed by the departmental officers.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality etc., complete

Fabricating, supplying and fixing in positon of UPVC DOORS with frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an "A" section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dimantling the masnery, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the departmental officers.

Supplying and fixing of 110 mm Dia. 6 KSc PVC pipe inluding cost and conveyance to site laying fixing etc.,complete

Supplying and fixing in position of best quality approved make with glazed earthnware cost of Wash Hand Basin Colour Without Pedestral of size 550*400mm with a cast iron brackets, incluing cost of 15mm diametre brass chromium plated pillar tape, 32 mm diametre CP waste union, 32mm diametr PVC waste pipe wiht rubber plug and chain, 15mm diametre GM wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash basin in the wall in position with a pair of C.I brackets with Teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of antocorrosive paint including testing for leackage etc., complete with standard specifications ( the wash hand basins and specials should be got approved by the Excutive Engineer before use on works)

Lettering the name board with painting and all Labour charges etc.,complete

R Jayakumar