Upgradation of Rural Roads in District Barmer under PMGSY-III (Batch-I), WB RRP-II. Package No. RJ05/P3/2019/08

Amount

Part`A" : ROAD WORK :

Construction of reference bench mark (1 No.), working bench mark (4 Nos.) and near all drainage structures and bridges (as per direction of Engineer-in-charge), reference pillar/ burgees @ 50m interval on both side of formation width including marking of centre line, setting out curves, recording of levels, white washing and lettering etc. complete as per MORD specifications cl. 108.

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRD Specification Clause 201.By Mechanical Means In area of thorny jungle

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Scarifying old bituminous road by making 50x50mm furrows criss-cross at 1.0 metre intervals at 45 degree to the center line of the carriageway

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRD Specification Clause 302.3

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MoRD Specification Clause 301.5 With 100 mtr. Lead

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per MoRD Specification Clause 303.1.

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Construction of granular sub-base by providing well graded crusher broken material, mixing in a mechanical mix plant at OMC , carriage of mixed material to work site upto lead of 1000m spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Specification Clause 401.For Grading I Material

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per MoRD Specification Clause 405. Using Crusher Broken aggregate by Mechanical Means

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRD Specification Clause 405. Using Crusher Broken aggregate by Mechanical Means

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per MoRD Specification Clause 408.Using naturally occuring gravel

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRD Specification Clause 502. Low porosity

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRD Specification Clause 503.

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRD Specification Clause 508..Case II By Mechanical Means.Bitumen VG-30

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing of aggregate and plastic waste cutting in a hotmix plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRD Specification Clause 508. By Mechanical Means.Bitumen VG-30

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRD Specification Clause 510 By Mechanical Means Type B Bitumen(VG-30) Case II Type (B)

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Construction of Foundation / Inaugration Pedastal in 23 cm thick Brick masonry in CM 1:4 of size 1.20m x 1.80m above ground level with adequate foundation including providing and fixing of Granite stone of size 0.75m x0.60m with engraving letters and figures,cement plaster,white washing etc. complete as per direction of Engineer in charge.

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Part`B" : ROAD FURNITURE :

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRD Specification Clause 801

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and fixing of PMGSY logo with definition plate (as per MORD design/drawing) 2mm thick MS plate framed to angle Iron 40x40x6mm including orange luminous colour paint on logo, size of diamand plate 600x600mm definition plate 900x250mm supported on MS post of angle Iron of size 65x65x6mm, 3m long stove enameled paint with hold fastfirmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRD Specification Clause 1700

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MoRD Specification Clause 1701

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and Erecting typical Citizen's information Board as per approved drawing & specification of MORD made of Two plates of Aluminium Composite Materials (ACM), material specifications as per Clause 1701.3.7 of size 900 mm x 750 mm size riveted over welded M.S. angle iron frame of 25mm x 25mm x 5 mm size on back on edges. Frame will be welded to two nos. 75 mm x 75 mm (12 SWG) sheet tubes posts placed at 1000 mm apart centre to centre these posts will be embedded in cement concrete M15 grade blocks of 450 mm x 450 mm x 600 mm below ground level. The lettering and borders, etc. of plates shall be as per clause 1701.4.6 Messages/Borders. All the sections of frame and posts will be painted with primer and two coats of Epoxy paint. The steel tube below ground level will be painted with three coats of Epoxy paint. The design, painting and lettering shall be done as per approved drawing and MoRD Specification Clause 1700

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRD Specification Clause 1703

5th Kilometre Stone (precast)

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Ordinary Kilometer Stone (Precast)

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

200 m stone (precast)

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Cut Stone boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988 3.70 meter wide and 10 cm high for general traffic

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and Erecting typical Maintenance information Board as per approved drawing & specification of MORD made of MS sheet of 1.6 mm thick of size 900mm x 1500mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M-15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border will be with ready mixed synthethic enamel paint of superior quality in required shade and colour etc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD Specification.

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

Supply & Fixing of mandatory / regulatory reflective sign board fixed on 3 meter long Angle Iron of size 65x65x6 mm complete as per IRC-67-1977 made of 2 mm thick M.S. sheet stove enamelled paint and reflective symbol.

Stop signs with definition plate size 30x20 cm( 90 cm Octagon)

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

Stop signs with definition plate size 30x20 cm( 60 cm Octagon)

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

Supply of Caution Diversion sign board size 1800 x 600 mm having centre height of 75 cm made out or 1.25 mm thick M.S. sheet duly framed with angle iron size 40 x 40 x 5 mm fixed on two moving wheels and stands, made out of 75 x 40 mm channel having two solid rubber wheels mounted on ball bearings, boards is processed in stoving enamel blue and machine cut sheet reflective letter and arrow on one side and the other side having arrow only complete in all respect.

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

Supplying & Fixing route Marker reflective sign boards consisting of shield marked on M.S. flat 14 gauge of size 40 x 60 cm and definition plate of 30 x 25 cm, 14 gauge, fixed on mild steel posts of T Iron or Angle Iron for NH/SH :

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

Supplying of men at work sign board (folding type) made of 1.25 mm thick M.S. sheet size 900x900x900 mm painted in white stove enamelled paint and reflective machine cut sheet Men’s emblem and letter MEN AT WORK in red colours and additional attachment of size 150x900 mm plate for gang number and name with white stoving enameled back ground both plates are fixed on a folding stand of M.S. (heavy) steel tube of size 13.2 mm outer dia as per IS-1239 (part-I) 1979 duly painted in grey colour and both the plates are painted on back side in grey enamel paint.

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

P & F Delinator with 30 cm. outer dia RCC hume pipe NP-2 (As per IS-458/ 1971 ) pipe 1. OM. Long 40 cm embedded in cement concrete (1:4:8) block of size 50x50x40 cm. including excavation upto 40 cm depth. The inside of pipe shall be filled with C.C. (1:4:8) stone grit max size 20 mm or less upto the top with semi circular humping. The pipes shall be painted white/black with enamel paint with red dots two Nos. on each side

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Part`C" : RIGID PAVEMENT:

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRD Specification Clause 405. Using Crusher Broken aggregate by Mechanical Means

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

Construction of un-reinforced, without dowel bar, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound and water finishing to lines and grade as per drawing and MoRD Specification Clause 1501 including vaccum dewatering process with all required equipments

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

Add extra for dowel Bar for Cement Concrete Pavement as per drawing and MoRD Specification Clause 1501

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. (E)NP3 Pipes 300 mm dia

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

Part`D" : DRAIN:

Earthwork in excavation for structures as per drawing and MoRD specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRD specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

Plain/reinforced cement concrete in substructure complete as per drawings and MoRD specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 P.C.C. grade M 20 Nominal mix (1:2:4)

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

Providing and laying reinforced cement concrete in superstructure as per drawing and MoRD specifications Clauses 800, 1205.4 and 1205.5 For height upto 5 m R.C.C M 20 Nominal mix 1:2:4

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and MoRD specifications Clauses 1002, 1010 and 1202

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

Part`E" : PICHING ON SLOPE :

Earthwork in excavation for structures as per drawing and MoRD specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRD specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Stone masonry work in cement mortar in foundation complete as per drawing and MoRD specifications Clauses 702, 704, 1202 & 1203. Random Rubble Masonry In 1:6 cement mortar

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Construction of toe walls for protection of slopes as per drawing and MoRD specifications Clause 1302.5 Random rubble masonry in case of stone pitching laid with cement mortar (1:5)

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Pointing with cement mortar (1:3) on Stone work as per drawing and MoRD specification Clauses 613.3 and 1204 Flush and Rulled Type

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and laying filter material underneath pitching in slopes complete as per drawing and MoRD specifications Clause 1302

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and laying pitching on slopes laid over prepared filter media as per drawing and MoRD specifications Clause 1302 Stone/Boulder

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and MoRD specification Clauses 615, 710 and 1204.3.11 75 mm thick

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Part`F" : SYPHON :

Earthwork in excavation for structures as per drawing and MoRD specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Construction of granular sub-base by providing well graded crusher broken material, mixing in a mechanical mix plant at OMC , carriage of mixed material to work site upto lead of 1000m spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Specification Clause 401.For Grading I Material

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 300 mm dia

a) Burhan Ka Tala to Rabasar Km.0/0 to 7/500

b) Dhanau to Suret Ki Dhani Km. 0/0 to 5/800

c) Sedwa to Dhemba Km. 0/0 to 8/100

Annual maintenance charge on prorata basis as per fixed percentage basis

1st Year : 0.68%

2nd Year : 0.87%

3rd Year : 1.12%

4th Year : 1.31%

5th Year : 1.52%

m/s bhajanlal vishnoi construction company

M/S DWARKADAS DOSI

M/s Barkat Ali Bahadur Khan

M/s Tansingh Chouhan

MS BABU LAL BHAGWAN DAS

M/s Amrit Lal Khatri