Conversion of existing kitchen into Modular Kitchen in the Residential quarter of Honble Chief Judicial Magistrate, Mayabunder, NM Andaman under Sub Division No.I, NACD, APWD, Mayabunder including IEI.

Amount

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

a) Granite of any colour and shade i) Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

12 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

1:6 (1 cement: 6 fine sand)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Two or more coats on new work

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling tile work in walls laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Providing and laying hollow block cement concrete block walling 200mm thick consisting of hollow block of size 400mm x 200mm x 200mm of mix 1:3:6 (1 cement; 3 coarse sand; 6 graded stone aggregate 10mm nominal size) having a crushing strength of 3.5 N/Sqm at 28 days as per IS:2185 (Part-I) 1979 laid in cement mortar 1:6 (1 cement; 6 coarse sand) upto floor five level.

Providing & fixing bottom cabinets of different carcass sizes made of 18mm thick Pre-laminated HDF Boards (of Green Ply or equivalent) in partitions, Front Face panels & back boards ,each cabinet units consisting of required number of SS 304 Grade modular kitchen wire baskets as required a)1st Cabinet unit of required Sizes for Cylinder Storage with Openable door shutters & with no baskets. b)2nd unit comprising of Top drawer for perforated cutlery baskets , Middle drawer for partition baskets & Bottom most drawer for Thali/Plate baskets , all complete of required carcass sizes, including fixing with SS 304 Grade wire baskets. c) 3rd unit comprising of Top drawer for Cup & Saucer baskets , Middle drawer for Plane/Multipurpose baskets & Bottom most drawer for Large Utensils baskets , all complete of required carcass sizes, including fixing with SS 304 Grade wire baskets. d) 4th unit comprising of Top drawer for Grain Trolley baskets of 200mm ht & bottom drawer for Grain Trolley baskets of 330mm Ht , all complete of required carcass widths & Depths including fixing with SS 304 Grade wire baskets. e) 5th unit comprising of Single drawer for Bottle pullout baskets of 02shelves of 430mm ht all complete of required carcass widths & Depths including fixing with SS 304 Grade wire baskets. Including with a set of necessary soft close SS Telescopic channels 22" (Depth), Soft close SS Quadrail Channels of 22" Depth, SS Soft Close Auto Hinges (0 degree), SS Screws of required sizes, SS Handles of 200mm size in each shutters of cabinet unit, Magnetic Catcher, Adhesives etc wherever required all complete as per enclosed drawing & the directions of EIC. (Only Front Face of cabinet unit shall be measured for payment Purpose). (All hinges, channels i/c wire baskets above used shall be of Hettich brand or equivalent).

Providing & fixing bottom cabinets of different carcass sizes made of 18mm thick Pre-laminated HDF Boards (of Green Ply or equivalent) in partitions, Front Face panels & back boards ,each cabinet units consisting of required number of SS 304 Grade modular kitchen wire baskets as required a)1st Cabinet unit of required size with openable shutters for Stainless Steel Modular Kitchen Corner Storage Carousel basket 2 Shelf Rack made Of Stainless Steel AiSi 304 (26Inches Size). b)2nd unit comprising of Single drawer for Bottle pullout baskets of 02shelves of 430mm ht all complete of required carcass widths & Depths including fixing with SS 304 Grade wire baskets. c) 3rd unit comprising of internal shelves & provided with openable type Single Shutter made of 18mm thick HDF Boards. d) 4th unit below the kitchen sink for door mounted SS 304 Grade Dust bin holder of Nickel Chrome Plated, Dia -10" & 6" Ht of Plantex and Heavy Type Stainless Steel Detergent Holder basket of Size 10"(L) x 11"(H)x 8"(W) with 02nos of Shelves all chrome finished inside the Cabinet unit & provided with 18mm thick HDF Boards in the openable type shutters for the cabinet unit. Including with a set of necessary Soft close SS Quadrail Channels of 22" Depth, SS Soft Close Auto Hinges (0 degree), SS Screws of required sizes, SS Handles of 200mm size in each shutters of cabinet unit, Magnetic Catcher, Adhesives etc wherever required all complete as per enclosed drawing & the directions of EIC. (Only Front Face of cabinet unit shall be measured for payment Purpose). (All materials i/c wire baskets above used shall be of Hettich brand or equivalent).

Providing & fixing bottom cabinets of different carcass sizes made of 18mm thick Pre-laminated HDF Boards (of Green Ply or equivalent) in partitions, Front Face panels & back boards ,each cabinet units consisting of required number of SS 304 Grade modular kitchen wire baskets as required a)1st & 2nd Cabinet unit both comprising of Top drawer for Plane/Multipurpose baskets required width, 22" Depth, 4" Height , Middle drawer for Plane/Multipurpose baskets required width, 22" Depth, 6" Height ,Bottom most drawer for Plane/Multipurpose baskets required width, 22" Depth, 8" Height all complete of required carcass sizes, including fixing with SS 304 Grade wire baskets. Including with a set of necessary soft close SS Telescopic channels 22" (Depth), Soft close SS Quadrail Channels of 22" Depth, Adhesives,SS Handles of 200mm size in each drawers of cabinet unit, etc wherever required all complete as per enclosed drawing & the directions of EIC. (Only Front Face of cabinet unit shall be measured for payment Purpose.) (All hinges, channels i/c wire baskets above used shall be of Hettich brand or equivalent).

Providing & Fixing wall mounted top cabinet with 40cm projection & other required dimensions of width & height (as per the drawing enclosed) above the Kitchen working slab with required racks shutters, partition, rear side board all made of 18mm thick Pre-Laminated HDF Boards (of Green Ply or equivalent) i/c necessary screws,Stainless Steel Soft close Hinges (Size - 0 -Degree), SS Handles of size 200mm, Nails, Adhesives, etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed.) (Hinges above used shall be of Hettich brand or equivalent).

Providing & Fixing wall mounted top cabinet with 30cm projection & other required dimensions of width & height (as per the drawing enclosed) above the Kitchen working slab with required racks, Sides, rear side board including fixing with Top Hung Fully Glazed shutters in the cabinet , all made of 18mm thick Pre-Laminated HDF Boards (of Green Ply or equivalent) using 4mm thick glass panes in the glazed shutter, 12mm thick HDF Boards in the rear sides, i/c Stainless Steel screws,Stainless Steel Hydraulic Soccer of 12Kg Capacity,Stainless Steel Soft close Hinges (Size - 0 -Degree), SS Handles of size 200mm, Nails, Adhesives, etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed). (Hinges, Channels, soccers above used shall be of Hettich brand or equivalent).

Providing & fixing top cabinet for GTPT (Glass Tray Plate Tray) of required size above the kitchen working slab,with openable shutters, Sides, top, bottom of the cabinet unit all made of 18mm thick Pre-Laminated HDF Boards (of Green Ply or equivalent) , 12mm thick Pre-Laminated HDF Boards in rear sides backing, Fixing of SS 304 Grade Glass & plate with drip tray set of 03Pieces inside the cabinet unit (as per the enclosed drawing) including necessary soft close auto hinges (0 Degree), SS Cleats, Adhesives,SS Handles of 200mm size in the shutters of cabinet unit, etc wherever required all complete as per enclosed drawing & the directions of EIC. (Only Front Face of cabinet unit shall be measured for payment Purpose.) (Above used hinges, baskets shall be of Hettich brand or equivalent)

Providing and fixing wall mounted Swan Neck Sink Cock chrome finished with Extended Swivel Spout & Lever Type handle Complete of Minimum weight not less than 800gms including a hole making for wall mount installation for the modular Kitchen Sink all complete as per the direction of EIC. (Hindware Brand Code F2 80026CP)

15mm nominal bore (Jaguar, Hindware or equivalent).

Painting with PU Hi Gloss Enamel Paint on new work by scrapping, smoothening the suface with sanding paper pf different sizes, applying with Duco Soft cut Putty/ Body filler to fill up complete dents on the surface to be painted & drying it for 15minutes, then Rubbing it with sanding paper of required degree mixed with water, Applying two coats of PU white primer (PU Primer+PU Hardener (1:4) mixed with required amount of PU thinner (15-30%) with the help of Spraying Gun machine & allowing it to dry for 5 to 6 hours & then again rubbing with sanding paper of required degree mixed with water , Applying two coats of PU paint of required & approved colour shade (PU Paint+PU Hardener(1:4) mixed with required amount of PU thinner (15-30%) with the help of Spraying Gun machine, allowing it to dry for 6 to 8hours, rubbing again with sanding paper of of required degree in the interval of two coats of PU Paint, finally allowing it dry for 6 to 8 hours & then buffing the top surface with wool buffing pads by applying rubbing compounds,wax of required quantity to get Hi Gloss mirror finish, all complete as per the directions of EIC.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying, installation, testing and commissioning of brand new inverter 3.7 KVA UPS JUMBO HI-END Model of equivalent make of Microtek Model JUMBO 3.7 KVA Multi Sine Wave UPS (48V) or its equivalent to ISI standard.

Supplying of brand new 12 V 180 Ah Tall Tubular batteries equivalent to Make Luminous Model Inverlast - ILTT24060 or its equivalent to ISI standard.

Supplying, installation, testing and commissioning of brand new ceiling mounted Angular Suction and Auto Clean Designer Series Electric Chimney equivalent to make Prestige AKH 900 SL SKU code 41615 complete or its equivalent to BOSCH, GLEN, Hindware, Kaff, Faber Hood etc. as required.

Supplying of 15W LED surface mounted slim fit low profile downlights superior light output and uniformity utilising the latest edge-lit LED technology equivalent to Havells EDGEPRO ROUND Cat No.EDGEPRORDDLR15WLED857S or its equivalent to ISI standard etc. as required.